SCO Unixware 7.1.4 Network Adapter Error Post: 302439972

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO Unixware 2.1

I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike : UX:strintercept error: dropping message this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is...

2. AIX

hacmp network adapter re-define

I have an LPAR in a P5 machine which has been setup in an HACMP cluster. The person who set it up allocated the wrong network adapter (en) to the persistent network. For the life of me I cannot find where I can re-assign this adapter. Anyone able to help me as I am tearing my hair out and do not...

3. AIX

change network adapter

hello i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 ) what i need to do after the new adapter installed on the machine? thanks best regards ariec

4. SCO

sco unixware + oracle 8.0.5

hi, anybody can give procedure for how to install oracle 8.0.5 in sco unixware 7.1.4.

5. AIX

How to active this network adapter?

When I configure two VIO Servers, VIOS1 used to ping its gateway, after I configured second VIOS2, VIOS1 cannpt ping its gateway, when I run this command: entstat -all ent#|grep -i priority Priority: 5 Active: False How to make Active to True?

6. UNIX for Dummies Questions & Answers

External Network Adapter for Solaris 10

Hi All, I am new here - this is my first post. I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the...

7. SCO

VMware and SCO Unixware 7.1.4 Network issue

I am haveing a problem with my VMware ESXi 4.1 server and a virtual SCO UnixWare 7.1.4 server that I need for a legacy application for my company. The problem seems simple but I can't find a solution. The UnixWare (UW) server is a clean install and patched as SCO recommends. I am able to telnet to...

8. SCO

Sco UNIXware 7.1.4 error in booting

Hello Dears, I have fujitsu tx300 S7 server with installed sco unixware 7.1.4, Now the /etc is corrupted and the sco cannot boot. There is no emergency disk or cd, I'm trying to fix this with reinstalling unixware again, but the problem now that when i try to install the HBA driver that i...

9. SCO

Can not recognize network adapter SCO UNIX in HP z400

hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback. show message : dlpid:unable to open network adapter driver...

LEARN ABOUT PHP

shutdown

asadmin-shutdown(1AS)						   User Commands					     asadmin-shutdown(1AS)

NAME

       asadmin-shutdown, shutdown - brings down the administration server

SYNOPSIS

       shutdown [--user admin_user][--password admin_password][--host localhost] [--port 4848][--passwordfile filename][--secure|-s]

       shutdown  gracefully brings down the administration server and all the running instances. You must manually start the administration server
       to bring it up again.

OPTIONS

       --user		       administrative user associated for the instance.

       --password	       administrative password corresponding to the administrative user.

       --host		       host name of the machine hosting the administrative instance.

       --port		       administrative port number associated with the administrative host.

       --passwordfile	       file containing passwords appropriate for the command (e.g., administrative instance).

       --secure 	       if true, uses SSL/TLS to communicate with the administrative instance.

       Example 1: Using the shutdown command

       asadmin> shutdown --user admin --password adminadmin --host bluestar --port 4848
       Waiting for admin server to shutdown...
       Admin server has been shutdown

EXIT STATUS

       0		       command executed successfully

       1		       error in executing the command

INTERFACE EQUIVALENT

       Administration Server page

       asadmin-start-instance(1AS), asadmin-stop-instance(1AS), asadmin-restart-instance(1AS)asadmin-start-domain(1AS),  asadmin-stop-domain(1AS),
       asadmin-start-appserv(1AS), asadmin-stop-appserv(1AS)

J2EE 1.4 SDK							    March 2004						     asadmin-shutdown(1AS)