locator led SUN T2000 Post: 302438692

10 More Discussions You Might Find Interesting

1. Solaris

Sun Sparc T2000 + StorageTek 2540 - Help, I'm lost

I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it. I have one StorageTek 2540 array that I would like to connect to the T2000. For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be...

2. Solaris

Error while trying to boot from cdrom on Sun Fire T2000

Hi Guyz, I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso. When trying to boot at the ok> boot cdrom i get the following error: ----------------------------------------------------------------------- Boot device:...

3. Solaris

Sun Server T2000 occasionally reboot

Hi, i am really 'fresh' to Solaris or any UNIX OS. My role as web developer but i need slightly involve to Solaris support. It is harder for me to understand it and i recently encounter a problems. /var file system (/dev/md/rdsk/d425) is being checked. run fsck -F ufs /dev/md/rdsk/d425 ...

4. Solaris

Auto boot problem on Sun T2000

Hi All I have a problem on T2000 server. bash-3.00# uname -a SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot: Rebooting with command: boot Boot device: disk:b File and args: The file just loaded does not appear...

5. Solaris

Sun T2000 question

This may be a stupid question, but I don't want to take any chances. I have a Sun T2000 in production. I want to run the "resetsc" command on the ALOM controller to active an IP address change. Will resetting ALOM affect the running OS? Thanks

6. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk...

7. Solaris

Sun T2000 error codes

I got a Power supply failure. I replaced the power supply and still got the error. Any ideas on what I should try next?

8. Solaris

Patching failed on Sun T2000

Hi folks, I was patching Sun server (SunOS suns121 5.10 Generic_144488-17 sun4v sparc SUNW,Sun-Fire-T200) with the lateset bundle. It was completed with no errors. Server was restarted with shutdown command (/usr/sbin/shutdown -y -i6 -g0) after patching was complete. However, after that,...

9. Solaris

Need Help, I want to reset password for Sun Fire T2000 Server

============================== ALOM BOOTMON v1.3.1 ALOM Build Release: 001 Reset register: f0000000 EHRS ESRS LLRS SWRS ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED. TTYC - Internal Loopback Test TTYC -...

10. Hardware

Sun T2000 activity LED in slow blink even though Domain is up

Hello All I have a SunFire T2000 running f/w 6.3.2 The activity led is in slow blink mode. this typically indicates that the domain is down, however it is up and running. I had this issue before and resetting the sc fixes the issue, but now it has come back. showfaults from the sc indicatess...

LEARN ABOUT DEBIAN

sdl::gfx::imagefilter

pods::SDL::GFX::ImageFilter(3pm)			User Contributed Perl Documentation			  pods::SDL::GFX::ImageFilter(3pm)

NAME

       SDL::GFX::ImageFilter - image filtering functions

CATEGORY

       TODO, GFX

METHODS

   MMX_detect
       int gfx_image_MMX_detect()      CODE:	       SDL_imageFilterMMXdetect();

   MMX_off
       void gfx_image_MMX_off()      CODE:	     SDL_imageFilterMMXoff();

   MMX_on
       void gfx_image_MMX_on()	    CODE:	    SDL_imageFilterMMXon();

   add
       int gfx_image_add(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   mean
       int gfx_image_mean(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   sub
       int gfx_image_sub(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   abs_diff
       int gfx_image_abs_diff(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult
       int gfx_image_mult(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   mult_nor
       int gfx_image_mult_nor(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult_div_by_2
       int gfx_image_mult_div_by_2(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   mult_div_by_4
       int gfx_image_mult_div_by_4(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   bit_and
       int gfx_image_bit_and(Src1, Src2, Dest, length)	    unsigned char *Src1      unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length);	   OUTPUT:	     RETVAL

   bit_or
       int gfx_image_bit_or(Src1, Src2, Dest, length)	   unsigned char *Src1	    unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length);	  OUTPUT:	    RETVAL

   div
       int gfx_image_div(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   bit_negation
       int gfx_image_bit_negation(Src1, Dest, length)	   unsigned char *Src1	    unsigned char *Dest      int length      CODE:
		 RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length);      OUTPUT:		 RETVAL

   add_byte
       int gfx_image_add_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_uint
       int gfx_image_add_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_byte_to_half
       int gfx_image_add_byte_to_half(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       C      CODE:	      RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_byte
       int gfx_image_sub_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_uint
       int gfx_image_sub_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   shift_right
       int gfx_image_shift_right(Src1, Dest, length, N)      unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N);	    OUTPUT:	      RETVAL

   shift_right_uint
       int gfx_image_shift_right_uint(Src1, Dest, length, N)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       N      CODE:	      RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N);	  OUTPUT:	    RETVAL

   mult_by_byte
       int gfx_image_mult_by_byte(Src1, Dest, length, C)      unsigned char *Src1      unsigned char *Dest	int length	unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C);	    OUTPUT:	      RETVAL

   shift_right_and_mult_by_byte
       int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C)	 unsigned char *Src1	  unsigned char *Dest	   int length
	    unsigned char N	 unsigned char C      CODE:	      RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
	    OUTPUT:	      RETVAL

   shift_left_byte
       int gfx_image_shift_left_byte(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left_uint
       int gfx_image_shift_left_uint(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left
       int gfx_image_shift_left(Src1, Dest, length, N)	    unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N);	   OUTPUT:	     RETVAL

   binarize_using_threshold
       int gfx_image_binarize_using_threshold(Src1, Dest, length, T)	  unsigned char *Src1	   unsigned char *Dest	    int length
	    unsigned char T	 CODE:		 RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T);      OUTPUT:
		 RETVAL

   clip_to_range
       int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax)	unsigned char *Src1	 unsigned char *Dest	  int length	  unsigned
       char Tmin      unsigned char Tmax      CODE:	      RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax);	OUTPUT:
		 RETVAL

   normalize_linear
       int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax)      unsigned char *Src1	unsigned char *Dest	 int
       length	   int Cmin	 int Cmax      int Nmin      int Nmax	   CODE:	   RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
       length, Cmin, Cmax, Nmin, Nmax);      OUTPUT:	       RETVAL

   convolve_kernel_3x3_divide
       int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_divide
       int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_divide
       int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_divide
       int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_3x3_shift_right
       int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_shift_right
       int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_shift_right
       int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_shift_right
       int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   sobel_x
       int gfx_image_sobel_x(Src, Dest, rows, columns)	    unsigned char *Src	    unsigned char *Dest      int rows	   int columns	    CODE:
		 RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns);	OUTPUT: 	  RETVAL

   sobel_x_shift_right
       int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift)      unsigned char *Src      unsigned char *Dest      int rows
	    int columns      unsigned char NRightShift	    CODE:	    RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
       NRightShift);	  OUTPUT:	    RETVAL

   align_stack
       void gfx_image_align_stack()	 CODE:		 SDL_imageFilterAlignStack();

   restore_stack
       void gfx_image_restore_stack()	   CODE:	   SDL_imageFilterRestoreStack();

AUTHORS

       See "AUTHORS" in SDL.

perl v5.14.2							    2012-05-28					  pods::SDL::GFX::ImageFilter(3pm)