Loading a RAID array after OS crash Post: 302438489

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Percent complete error while scanning RAID array during 5.0.6 load

Percent complete SCO 5.0.6 / No longer an issue

2. AIX

RAID level of array = false?

I created a RAID 5 array and when I list out the attributes of the "hdisk" it reports back raid_level = 5 but the RAID level of the array = false. What does this actually indicate about my array? I've never paid much attention to this until now since I have a disk reporting failure I want to make...

3. UNIX for Dummies Questions & Answers

Loading a comma Delimited file into an Array

Hello, I have been stuck on this aspect of loading a comma delimited file into an array. I thought i had the syntax right, but my commands are not working the way I want them to. Basically my cut command is splitting the file up by spaces and commas. I want the cut command to ignore white spaces....

4. UNIX for Advanced & Expert Users

Create RAID - Smart Array Tool - ML370

Hi guys, i must install an old old old ml370 server... I must create a RAID 5 with my 4 SCSI disk. I need a SmartStart disk for create it or a Floppy Disk called "Array configuration Tool". I don't find it on the hp website...:mad::mad::mad: Anyone have it?? Thanks in advance. Zio

5. Solaris

EFI Disk labels on 3510 raid array

Hi Peeps, Can anyone help me an EFI lablel on a 3510 raid array that I cannot get rid of, format -e and label just asks you if you want to label it. Want an SMI label writing to it. Anyone got any ideas on how to remove the EFI label? Thanks in advance Martin

6. Red Hat

missing raid array after reboot

Dear all , i ve configured raid 0 in redhat machine(VM ware), by following steps: #mdadm -C /dev/md0 -l 0 -n 2 /dev/sdb1 /dev/sdc1 #mkfs.ext3 /dev/md0 #mdadm --detail --scan --config=mdadm.conf >/etc/mdadm.conf then mounted the/dev/md0 device and also added a entry in fstab. how...

7. Shell Programming and Scripting

Problem with awk array when loading from shell variable

Hi, I have a problem with awk array when iam trying to use awk in solaris box as below..Iam unable to figure out the problem.. Need your help. is there any alternative to make it in arrays from variable values nawk 'BEGIN {SUBSEP=" "; split("101880|110045 101887|110045 101896|110045...

8. UNIX for Advanced & Expert Users

Revive RAID 0 Array From Buffalo Duo NAS

Thank you in advanced, I had a Buffalo DUO crap out on me that was setup as RAID 0. I dont belive it was the drives but rather the controller in the DUO unit. I bought another external HDD enclosure and was able to fireup the two older DUO drives in it and I think I resembled the RAID...

9. UNIX for Beginners Questions & Answers

Loading associative array from exported function

Hello. I have an export of an associative array build using declare -p SOME_ARRAY_NAME > SOME_FILE_NAME.txt. Producing some thing like declare -A SOME_ARRAY_NAME=( ="some_text" ="a_text" ......... ="another_text" ) in a text file. I have a stock of functions which are sourced from...

LEARN ABOUT DEBIAN

array-info

array-info(1)															     array-info(1)

NAME

       array-info - check the status of a HP (Compaq) SmartArray controller

SYNOPSIS

       array-info -d array_device_path [-a|-l|-A|-c|-s|-L|-h]

DESCRIPTION

       Array-info is a command line tool to retrieve informations and logical drives status from several RAID controllers (currently HP Compaq IDA
       and CISS and MD).  It displays informations about the firmware version, Rom revision, number of physical and logical  drives  on  the  con-
       troller, aswell as the fault tolerance, size, number of physical disks and status for each logical drive.

OPTIONS

       --device | -d
	      Path to array device, e.g. /dev/ida/c0d0 or /dev/cciss/c0d1

       --all-drives | -a
	      Show informations about all drives

       --logical drive | -l
	      Show informations about selected logical drive

       --show-ctrl | -c
	      Show informations about controller

       --show-logical | -L
	      Show informations about logical drives

       --show-physical | -p
	      Show physical device informations

       --show-status | -s
	      Show status of logical drives

       --show-all | -A
	      Show all informations

       --version | -V
	      Show version

       -h     Show help about options

COPYRIGHT

       This  manual page was written by Raphael Pinson <<raphink@ubuntu.com>>.	Permission is granted to copy, distribute and/or modify this docu-
       ment under the terms of the GNU General Public License, Version 2 or any later version published by the Free Software Foundation.

								    2006-12-15							     array-info(1)