Help needed to find out the disk controller for veritas disks
hi all
i am using vxvm 5.1 on my sun blade 150 which is running with solaris 5.10. When i give the command "vxdisk list" it gives the following output
My question is, i have ultrascsi storage box which is having 6 sun 36 GB hard disks. here for the root disk, it is straightaway giving the c#t#d#s# number. i am not getting for other disks. There is one command, i hope it is "vxddlam" with some option can give the exact controller and its respect disk names. Can someone tell me that command?
Hi,
I am a newbie to Solaris. I want to know how to find out the controller target and disk number on a SunFire V890 box that has 6X72GB disks. The probe-scsi output is as shown below:
/pci@8,600000/SUNW,qlc@2
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 ... (1 Reply)
recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
hi
this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network)
i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to... (4 Replies)
hi...
i hav a problem to install sco unix
while installing sco unix 5.0.5 in acer altos with hardware raid
am getting error
"Warning HD: no root disk controller was found
system error 5: while getting fs type
flushing controller: DAC960PRL cache done."
i hav use the following... (18 Replies)
So today I tried to upgrade a customer from a Proliant with an HPSAS controller to an Intel server with a MEGASAS controller.
First, I downloaded the megasas driver from SCO and installed it on the old system.
Then I created a new Microlite Edge emergency boot cd with the new driver on it.
I... (2 Replies)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
I changed disk controller. Unplugged every disk, inserted another controller card, an IBM M1015. The disks are recognized in BIOS, and the controller card's BIOS shows up. But after that, I drop into GRUB and a prompt. That is all.
How shall I solve this problem? I am thinking of booting from... (2 Replies)
Hi
The scenario in the oracle t4-1 hardware with solaris 10 is as follows:
1. The initial install on the server was performed with an incorrect disk layout.
2. New disks were ordered and slot into the server.
3. The disks are allocated a controller and a disk number based on the disk or... (13 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Hi
I have created a new setup for VCS for doing some testing on virtual box. After creating 3 Solaris 10 machine (147148-26) with VCS. Here I have used one machine as ISCSI Storage.
VCS Version is
bash-3.2# /opt/VRTS/bin/haclus -value EngineVersion
6.0.10.0
bash-3.2#
bash-3.2# pkginfo... (4 Replies)
Discussion started by: hb00
4 Replies
LEARN ABOUT REDHAT
glutignorekeyrepeat
glutIgnoreKeyRepeat(3GLUT) GLUT glutIgnoreKeyRepeat(3GLUT)NAME
glutIgnoreKeyRepeat - determines if auto repeat keystrokes are reported to the current window
SYNTAX
void glutIgnoreKeyRepeat(int ignore);
ARGUMENTS
ignore Non-zero indicates auto repeat keystrokes should not be reported by the keyboard and special callbacks; zero indicates that auto
repeat keystrokes will be reported.
DESCRIPTION
glutIgnoreKeyRepeat determines if auto repeat keystrokes are reported to the current window. The ignore auto repeat state of a window can
be queried with glutDeviceGet(GLUT_DEVICE_IGNORE_KEY_REPEAT).
Ignoring auto repeated keystrokes is generally done in conjunction with using the glutKeyboardUpFunc and glutSpecialUpFunc callbacks to
repeat key releases. If you do not ignore auto repeated keystrokes, your GLUT application will experience repeated release/press call-
backs. Games using the keyboard will typically want to ignore key repeat.
GLUT IMPLEMENTATION NOTES FOR X11
X11 sends KeyPress events repeatedly when the window system's global auto repeat is enabled. glutIgnoreKeyRepeat can prevent these auto
repeated keystrokes from being reported as keyboard or special callbacks, but there is still some minimal overhead by the X server to con-
tinually stream KeyPress events to the GLUT application. The glutSetKeyRepeat routine can be used to actually disable the global sending
of auto repeated KeyPress events. Note that glutSetKeyRepeat affects the global window system auto repeat state so other applications will
not auto repeat if you disable auto repeat globally through glutSetKeyRepeat.
SEE ALSO
glutSetKeyRepeat, glutDeviceGet, glutKeyboardFunc, glutKeyboardUpFunc, glutSpecialFunc, glutSpecialUpFunc
AUTHOR
Mark J. Kilgard (mjk@nvidia.com)
GLUT 3.7 glutIgnoreKeyRepeat(3GLUT)