Sponsored Content
Operating Systems Solaris Ultra 5 will not boot from DVD ROM :( Post 302436314 by greypilgrim on Saturday 10th of July 2010 06:02:09 PM
Old 07-10-2010
Data Ultra 5 will not boot from DVD ROM :(

Hi,

I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation.

When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and displays the ISO files.

However, when I get into OBP to try to install the via the DVD I get bad magic number and checksum errors (boot cdrom -install give same errors) -

ok boot cdrom -s

Boot device: /pci@1f, 0/pci@1,1/ide@3/cdrom@2,0:f File and args: -s
Bad magic number in disk label
Can't open disk label package

Can't open boot device

Bad checksum in disklabel
Can't open disk label package
Boot device: net File and args:
Network Link setup failed
Please Check Cable and Try AAgain.
Timeout waiting for ARP/RARP packet.

ok

Also here is the output of my probe-ide

ok probe-ide
Device 0 ( Primary Master )
ATA Model : WDDC WD136AA

Device 1 ( Primary Slave )
ATA Model: Maxtor 52049H4

Device 2 ( Secondary Master )
Removable ATAPI Model: HL-DT-STDVD-RAM GH22LP20

Device 3 ( Seconday Slave )
Not Present

ok


Could some one please let me know what could be wrong and step by step procedures to fix this?

Please help!

Thanks!
Ramesh.
 

10 More Discussions You Might Find Interesting

1. Solaris

DVD-ROM on Solaris 2.6

Netra T1 running Solaris 2.6 with following DVD installed: c0t6d0 Soft Errors: 131 Hard Errors: 0 Transport Errors: 0 Vendor: TOSHIBA Product: DVD-ROM SD-M1401 Revision: 1007 I know the cdrw command isn't in Solaris until version 8 and DVD is suppose to be udfs (not supported... (3 Replies)
Discussion started by: RTM
3 Replies

2. Solaris

external DVD-ROM drive for our datacentre

Hi there In our Data centre we have a mixture of SPARCS running from v100 and ultra10's to v800 and v1250 boxes we also have a large amount of x86 X2100 and X4100 boxes I am looking to purchase an external DVD-ROM drive that we can plug into the back of any of the boxes if we need to (I... (2 Replies)
Discussion started by: hcclnoodles
2 Replies

3. Solaris

Enterprise 4500 DVD-ROM

Hello, We have a Sun Enterprise 4500. I checked the product manual from SUN's site and it says it has a DVD-ROM. I downloaded Solaris 10 DVD image and burned it to a DVD and put it into the box but I don't see anyting in the /cdrom folder. Is there a command I can use to confirm if I have... (5 Replies)
Discussion started by: zafyil
5 Replies

4. Solaris

Solaris 10 does not mount CD/DVD ROM

Hi All, I just bought the SUN x2200m2. After I installed Solaris, I cannot see the CD/DVD ROM. I cannot mount the CD/DVD ROM since it says already mounted. When I try unmount it I get message that CD/DVD is not mounted. :( Any idea please. Thx (4 Replies)
Discussion started by: afakhim
4 Replies

5. HP-UX

how to distinguish dvd rom or hard disk

Class I H/W Path Driver S/W State H/W Type Description ============================================================================ disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE EAC DVD-ROM DW-224EV /dev/dsk/c0t0d0 ... (1 Reply)
Discussion started by: alert0919
1 Replies

6. Solaris

cd rom to dvd rom drive swap

Hello, I need to replace a cd rom drive with a dvd rom drive in a SunFire v120 running Solaris 8. My objective is to install Solaris 10 from dvd disc. Downloading Solaris 10 cd discs is not an option since I am in Baghdad, Iraq and connection speeds are horrible. So far, all I can get is power to... (9 Replies)
Discussion started by: 555
9 Replies

7. Solaris

Verify DVD Rom?

Hi All, I'm a total noob when it comes to troubleshooting Sun hardware issues, however, I've been tasked with just a task. How can I verify if the DVD rom is working in a Sun system? We've put in the dvd, but can't do anything. This is from command line. Thanks. ---------- Post updated at... (1 Reply)
Discussion started by: bbbngowc
1 Replies

8. Solaris

V210 USB Dvd Rom

Is there anyway to get a USB DVD ROM to work on a V210/V240/V440 SPARC systems for initial installation? I'm drawing a blank and I can't seem to find any documentation on this. (3 Replies)
Discussion started by: adelsin
3 Replies

9. AIX

need help - How to mount DVD rom in AIX in Command line

Dear Friends could u pls help me on this . how to mount DVD rom in command line in aix? THanks DD (4 Replies)
Discussion started by: ded325
4 Replies

10. Hardware

inability to use cd rom or dvd burner

Here is my conundrum . I am unable to access my cd or dvd after I supposedly alter the BIOS setting to enable a "Live" CD or DVD to be used. Would ,changing the Hard Drive or Motherboard remedy the situation. Thanking you, katosan:wall::wall: (2 Replies)
Discussion started by: katosan
2 Replies
NETROM(4)						     Linux Programmer's Manual							 NETROM(4)

NAME
AF_NETROM - NET/ROM amateur packet radio protocol family DESCRIPTION
NET/ROM is a protocol used extensively by radio amateurs. The Linux NET/ROM protocol family permits access to these protocols via the stan- dard networking socket metaphor. The NET/ROM protocol layer only supports connected mode. IP traffic may be stacked on top of NET/ROM frames using a non-standard extension to the NET/ROM protocol. The only mode of operation is connected mode which is the mode used for a socket of type SOCK_SEQPACKET (stream sockets are not available in NET/ROM). This requires that the user ensures output data is suitably packetised, and that input data is read a packet at a time into a buffer of suitable size. NET/ROM addresses consist of 6 ascii characters and a number called the SSID. These are encoded into a sockaddr_ax25 structure which is provided to the relevant system calls. NET/ROM has some unusual properties. Notably in a multi-user system an AX.25 address is often associated with a user, and some users may not have such an association. a set of ioctl calls are provided to manage an association table. NET/ROM supports the following socket options for SOL_NETROM. NETROM_T1 is the T1 timer in 1/10ths of a second, NETROM_T2 is the T2 timer in 1/10ths of a second. NETROM_N2, the retry counter is also configurable. There is no 'infinite retry' option supported however. It is possible for an application to request that the NET/ROM layer return the NET/ROM header as well as the application data, this is done via the NETROM_HDRINCL socket option. SEE ALSO
call(1), socket(2), setsockopt(2), getsockopt(2), nrbroadcast(5), nrports(5), netromd(8), noderest(8), nodesave(8), nrparms(8). AUTHOR
Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk> Linux 25 July 1996 NETROM(4)
All times are GMT -4. The time now is 02:14 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy