All,
I am attempting to help tune a Sun for better performance (mainly for SAS 9.1), and have found indicators pointing to poor I/O utilization. I have run iostat -cx, and found one device in particular where the %w is in the 90's during processing. I have a feeling that this is where the SAS... (3 Replies)
I'm search for a disk exerciser / load tool like iometer, iozone, diskx for IBM AIX 5.2 and 5.3
Because of a very bad disk performance on several AIX systems, I need to have a tool which is able to generate a disk load on my local and SAN disks.
Does somebody knows a kind of tool which is... (5 Replies)
Friends.
I have to compare iostat -x output with a tool on solaris. Now there is column called wait in the output field which is showing zero. Now, in order to create some load on my system this is what i am doing
I am creating a file using dd command , the size of which is... (5 Replies)
Hello,
On Solaris 10, iostat -E gives me the following results:
sd1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAY2073RCSUN72G Revision: 0501 Serial No: 0708S08M2L
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0... (1 Reply)
Hi, can anyone please suggest a tool to dump i/o packets just like tcpdump does for network traffic. Basically I have a complex dataflow that needs to be optimized and I want to see how packets go to/from disk - what goes randomly and sequentially.
Thanks (8 Replies)
A find for the "iostat" command on a redhat 5 update 4 comes back with no results.
Any separate rpm needs to be installed to get the binary for this ?
Thanks in advance. (1 Reply)
Writing a Tool to simulate non-sequential disk I/O (simulate db file sequential read) in C POSIX
I have over the years come across the same issue a couple of times, and it normally is that the read speed on SAN is absolutely atrocious when doing non-sequential I/O to the disks. Problem being of... (7 Replies)
Hello everyone,
Can you please explain me what kind of information do IOSTAT show ?
iostat -xnz 3 show me those informations:
The I/O of the c0t0d0 disk is normal ?
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.0 ... (3 Replies)
Hello, I support Oracle 11g on AIX 7.1.
Using the command
$iostat -D hdisk2 hdisk4 hdisk5 5
I get the following output:
hdisk5 xfer: %tm_act bps tps bread bwrtn
44.0 1.4M 178.2 1.4M 14.7K
read: ... (3 Replies)
Hi Everyone,
I try to calculate the total hard disk space of a solaris machine using iostat -En command. Iterating the output and summing up all the number present near the Size: will give the exact size of the harddisk. But it is not working for a machine.
This command works in many flavors... (2 Replies)
Discussion started by: prasankn
2 Replies
LEARN ABOUT HPUX
vxdestroy_lvmroot
vxdestroy_lvmroot(1M)vxdestroy_lvmroot(1M)NAME
vxdestroy_lvmroot - remove LVM root disk and associated LVM volume group
SYNOPSIS
vxdestroy_lvmroot [-v] [-b] lvm_root_disk
DESCRIPTION
The vxdestroy_lvmroot command tears down and removes the LVM volume group associated with the specified physical disk. This is done by
removing the volumes in the volume group and then removing the volume group.
OPTIONS -b Invokes the setboot command to change the primary boot disk to the VxVM root disk from which the system was booted (if the pri-
mary boot disk is not already set to this disk). The alternate boot device remains unchanged. If the -v option is also speci-
fied, the settings of the primary and alternate boot devices are displayed.
-v Outputs verbose messages including a timestamp that indicates major operations being performed.
ARGUMENTS
lvm_root_disk
Specifies the device name of the LVM root disk that is to be destroyed, along with its entire volume group.
EXAMPLES
This example shows the vxdestroy_lvmroot command invoked in its simpliest form:
/etc/vx/bin/vxdestroy_lvmroot c5t1d0
# /etc/vx/bin/vxdestroy_lvmroot -v -b c3t0d0
Are you sure about destroying c3t0d0 (imported on VG /dev/vg02) ? YES
vxdestroy_lvmroot 06:02: Tearing down /dev/vg02 on device c3t0d0
vxdestroy_lvmroot 06:02:
Unmounting and removing any volumes associated with /dev/vg02
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol1
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol2
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol3
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol4
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol5
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol6
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol7
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol8
vxdestroy_lvmroot 06:02: Removing Volume Group /dev/vg02
vxdestroy_lvmroot 06:02: Removing device files in /dev/vg02
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c3t0d0
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d3
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d4
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d5
vxdestroy_lvmroot 06:03: Current setboot values:
vxdestroy_lvmroot 06:03: Primary: 0/0/6/0/0.0.0
vxdestroy_lvmroot 06:03: Alternate: 0/0/1/0/0.1.0
vxdestroy_lvmroot 06:03:
Making disk c0t1d0 (0/0/1/0/0.1.0) the primary boot disk
vxdestroy_lvmroot 06:03:
Removal of device c3t0d0, volume group /dev/vg02 was successful
SEE ALSO cpio(1), dd(1), fsck(1M), setboot(1M)vxbootsetup(1M)vxcp_lvmroot(1M)vxres_lvmroot(1M)VxVM 5.0.31.1 24 Mar 2008 vxdestroy_lvmroot(1M)