Sponsored Content
Special Forums IP Networking How to resolve hostnames on DHCP home network Post 302433144 by rhfrommn on Monday 28th of June 2010 05:15:20 PM
Old 06-28-2010
Your home router should be able to assign a static address to your Unix box so it gets the same IP every time it boots. My home printer is network enabled and that's what I had to do in order that the PCs could find the printer address every time. I simply assigned 192.168.1.150 to my printer on the Linksys router then configured the PCs to see that address when I print.
 

9 More Discussions You Might Find Interesting

1. IP Networking

home network not working!

i just linked 2 100MHz Linux kernel 2.4.2 boxes togeather using a direct cable connection, on two 3Com PCI network cards, using the EtherLink III chipset. Unfortuanately, when I boot both PCs, i get a loading interface: eth0 for five minutes, then a failed flag. No networking suppt. in windows,... (2 Replies)
Discussion started by: boris888
2 Replies

2. UNIX for Advanced & Expert Users

How to fire a print job on a printer at DHCP network??

Hi All, I have an issue related to printing on a printer at DHCP network. We have n numbers of printers which can be attached to n numbers of telnet clients of a server. Telnet sessions can be obtained from any machine and any available printer will be attached to that machine. Our aim is to... (2 Replies)
Discussion started by: pankajgupta
2 Replies

3. IP Networking

DHCP and Hostnames

I have a linksys DSL router. I run a mixed environment of Windows, Linux and Solaris. The routers dhcp tables show the windows machines hostnames and associated IP's ok but the unix bases mahines don't have associated hostnames in the DHCP tables. I can ping by IP but not my the machines... (5 Replies)
Discussion started by: mr16ga
5 Replies

4. UNIX for Dummies Questions & Answers

Using Linux on/in a home network

I recently received an e-mail from "the faculty" at Unix-dot-Com and I was reminded of this notable resource for folks learning about Unix and its clone, Linux. I hadn't posted anything in two years and during that time, I have been working, in my spare time, on a home network combining two Linux... (2 Replies)
Discussion started by: Annatar
2 Replies

5. Linux

Need help w/home network

Hello world! I'm writing to you from Chile, Southamerica, and need a little help with my tiny home netwk. Hope you can give me a hand because this thing is breaking my balls. This is what i have: 1 windows box with XP pro (server) 1 linux box with DSL (box) 1 wrt54gl router with dd-wrt... (1 Reply)
Discussion started by: juanpedro
1 Replies

6. IP Networking

Connecting to DHCP network with Realtek interface

I have a Realtek 8139 interface in one of my machines and it will not connect to the network. /etc/rc.conf contains ifconfig_rl0="DHCP" and "rl0" was obtained from a dmesg. A network interface restart yields the following: # /etc/rc.d/netif restart Stopping network: lo0 rl0 fwe0 plip0. rl0: no... (3 Replies)
Discussion started by: figaro
3 Replies

7. Shell Programming and Scripting

Scripting nslookup to resolve multiple hostnames

Hi Friends, I have a list of servers with their production names in a file. I want to know the best way eiter a command or a script that can do the following :- Append "-bkp" to each hostnames at the end And run nslookup and make sure I have valid backup IP add assigned to it. Any... (1 Reply)
Discussion started by: new2prog
1 Replies

8. Solaris

Configure network in unix with dynamic ip on my DHCP server?

can anyone tell me how can i configure network in unix with dynamic ip on my DHCP server?? (7 Replies)
Discussion started by: Reham.Donia
7 Replies

9. IP Networking

DHCP and DNS on a home network

Let's say I have a home network containing a server that acts as the resident gateway and serves dhcp and dns requests. Laptop A is frequently connected and disconnected from the network as it is used as a travel computer. Is there a secure way to make sure that whenever laptop A is connected to... (3 Replies)
Discussion started by: Zygomorph
3 Replies
defaultrouter(4)						   File Formats 						  defaultrouter(4)

NAME
defaultrouter - configuration file for default router(s) SYNOPSIS
/etc/defaultrouter DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s). The format of the file is as follows: IP_address ... The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that defaultrouter is read. Lines beginning with the ``#'' character are treated as comments. The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will cause the default route added by the kernel to be deleted. Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router. You can use routeadm(1M) to override this behavior. FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers. SEE ALSO
in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4) SunOS 5.10 17 Aug 2004 defaultrouter(4)
All times are GMT -4. The time now is 04:51 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy