I have setup my T5220 ILOM .. and its working fine. But if my network connection is broken to the ILOM i 'm unable to login to the ILOM for few hrs .. it gives me either wrong user/passwd error and after few hrs the same user/passwd works .. what could be the reason for this and how can i resove this ? is there anything i have not set up properly ?
Hello !
i'm facing an anoying problem during configuration of our new T5220 Enperise server. I've upgarded 'em with a pci-e ethernet expantion card for four additional networkinterfaces using the nxge drivers. i could fix them to 100 fdx rather simple by adding the following settings to the ... (6 Replies)
Hi Peeps,
Apologies if this is the wrong forum for this, if it is can someone point me in the direction of the right one?
Problem:
I've dropped an XVR-300 Graphics card into a T5220, configured it to output and input from the screen and keyboard instead of the virtual console. It... (3 Replies)
Hi,
I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?... (12 Replies)
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Hi,
SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc
sc> console -f
Enter #. to return to ALOM. (2 Replies)
We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid?
I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Hi,
We have two T5220 servers in our datacentre
one server is showing 64 processors online
and another showing 32 processors online
two are newly purchased, there is no hardware faults in this server
one server has 64gb memory and it shows 64 processors,
and other having 32gb memory and it... (5 Replies)
Hi Guys and Gals,
Wondering if anyone could help me, tricky one this.
Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc.
But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Hello guys,
can anyone give me some advice on how to perform
clean installation of Solaris 10 on T5220 ?
I am connected with serial management port on the machine,
i have the ok promt and now i should eject the dvdrom to insert
Solaris dvd into and start the clean install.
So how to do that... (3 Replies)
Have a T5220 with Oracle SN stickers on outside with one SN, but the ILOM shows a different SN (from another server). It seems this is a issue with T5220's (a co-worker ran into similar problem with 2 of his servers, he just had the ILOM's swapped).
Anyone know the command to change the ILOM... (3 Replies)
Discussion started by: RTM
3 Replies
LEARN ABOUT MINIX
newgrp
NEWGRP(1) User Commands NEWGRP(1)NAME
newgrp - log in to a new group
SYNOPSIS
newgrp [-] [group]
DESCRIPTION
The newgrp command is used to change the current group ID during a login session. If the optional - flag is given, the user's environment
will be reinitialized as though the user had logged in, otherwise the current environment, including current working directory, remains
unchanged.
newgrp changes the current real group ID to the named group, or to the default group listed in /etc/passwd if no group name is given.
newgrp also tries to add the group to the user groupset. If not root, the user will be prompted for a password if she does not have a
password (in /etc/shadow if this user has an entry in the shadowed password file, or in /etc/passwd otherwise) and the group does, or if
the user is not listed as a member and the group has a password. The user will be denied access if the group password is empty and the user
is not listed as a member.
If there is an entry for this group in /etc/gshadow, then the list of members and the password of this group will be taken from this file,
otherwise, the entry in /etc/group is considered.
CONFIGURATION
The following configuration variables in /etc/login.defs change the behavior of this tool:
SYSLOG_SG_ENAB (boolean)
Enable "syslog" logging of sg activity.
FILES
/etc/passwd
User account information.
/etc/shadow
Secure user account information.
/etc/group
Group account information.
/etc/gshadow
Secure group account information.
SEE ALSO id(1), login(1), su(1), sg(1), gpasswd(1), group(5), gshadow(5).
shadow-utils 4.5 01/25/2018 NEWGRP(1)