SUN T5240 vs M3000 Post: 302430591

9 More Discussions You Might Find Interesting

1. Solaris

raidctl on SUN T5240

Setting up a T5240 with two disks c1t0d0 and c1t1d0. I am trying to use raidctl but when I issue. raidctl -l I get Controller 1 Disk: 0.0.0 Disk: 0.1.0 So I try raidctl -c '0.0.0 0.1.0' -r 1 1 and I get "Array in use." I try

2. Solaris

Can't PowerOn M3000 - Bad Data CRC

Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help...

3. Solaris

Raidctl - Sun T5240 Solaris 10 Problem

I tried using raidctl earlier today to use my 2 disks in a RAID1 setup and I totally destroyed my OS install. I'm sure I did something funky and it freaked out. No big deal...right? This is what I was seeing after a reboot. I decided to just reinstall the OS. It let me go through all of...

4. Solaris

XSCF on M3000

Hi, I've updated a few M3000s to new firmware without any hassle, but on one of them the following is happening: XSCF> getflashimage -u wayner ftp://10.16.122.200/tftpboot/IKXCP1102.tar.gz Error: insufficient free space Any idea how to delete whatever old firmware is on there so I can...

5. Solaris

Bizarre Sun T5240 behavior

Hi - I have a T5240 with 7 LDOMS configured. One night, network comm was broken somehow. Nobody was doing anything on the machine at the time. Here is what I saw in messages: WARNING: nxge3 : nxge_dma_mem_alloc: ddi_dma_mem_alloc kmem alloc failed WARNING: nxge3 : nxge_alloc_rx_buf_dma:...

6. Emergency UNIX and Linux Support

disk replacment, SUN M3000

we have a SUN M3000 server. setup as only 1 domain. disk c0t0d0 and c0t1d0 and setup as SVM mirrors. a few days ago disk T1 failed. new we have replaced the disk, but can's see the disk in format. have done cfgadm and devfsadm. still can't access the new disk in format. the output...

7. Solaris

Application running too slow on Sun SPARC T5440 but run normal on sun M3000

Hi all, I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly. Here is my server T5440 info: ...

8. Solaris

Poor performance on an M3000

Hi We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g. As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can...

9. Solaris

Using a Modem on a T5-2 or a T5240

Hi Folks, Just a quick question - hopefully! I have an application currently running on a V890 with Solaris 9, I'd like to move this to either one of our T-5's or one of the T5240's in a Legacy container on an LDOM - but the fly in the ointment is the application still uses a standard Hayes...

LEARN ABOUT MOJAVE

install-solaris

install-solaris(1M)                                                                                                            install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris  invokes  the  Solaris  Install  program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

           Minimum physical memory for all installation types

       128 MB

           Minimum physical memory required for windowing system

       384 MB

           Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

           Minimum physical memory for all installation types

       256 MB

           Minimum physical memory required for windowing system

       512 MB

           Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris  exists  only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWcdrom  (Solaris instal-  |
       |                             |lation media)                |
       +-----------------------------+-----------------------------+
       |Interface Stability          |Evolving                     |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

                                                                    23 Sep 2005                                                install-solaris(1M)