Add new disk to Sun StorEdge 3310 RAID Post: 302429738

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

sun storedge

I just installed sun storedge 3310 connected to a sunfire 280R with a total siz of 680GB and now am trying to create filesystems. issue format command and created my partitions, the largest size of the partition is 170GB. but I try to create new filesystems by using newfs like newfs...

2. Solaris

Add new hard disk to sun sparc server?

A sparc server has a new SCSI hard disk added and labeled by the engineer, but they need to be formatted identically to an existing disk (c4t0d0). You decide to script the process and run from the command line without interaction. I know that the following command line must be achieve this. #...

3. UNIX for Advanced & Expert Users

Help: Sun Disk partitioning for Sun V240 & StorEdge 3300

Dear Sun gurus, I have Sun Fire V240 server with its StorEdge 3300 disk-array. Following are its disks appeared in format command. I have prepared its partitions thru format and metainit & metattach (may be i have made wrong steps, causing the errors below because I have done thru some document...

4. UNIX for Dummies Questions & Answers

Sun - RAID

From what I have been finding on the net is that most all Sun RAID setups are software? Is it really that uncommon for Sun servers to have hardware RAID?

5. Solaris

Using Enterprise 4500 with storedge D100 and storedge A5200

Sorry if this seems trivial. i have been given a task at work to configure a sun processing server "enterprise 4500" so it can work with the a storage server "storedge A5200" and "storedge D1000" the truth is i have never worked on a sun server before. i need a guideline (step by step) as to...

6. Solaris

storEDGE A5000 disk Array

Do you know how do I make my solaris 8 detect the storEDGE A5000?. I have problem making it recognise, without that I cannot install VxVM. Any ideas?

7. Filesystems, Disks and Memory

Poor read performance on sun storedge a1000

Hello, i have a a1000 connected to an e6500. There's a raid 10 (12 disks) on the a1000. If i do a dd if=/dev/zero of=/mnt/1 bs=1024k count=1000 and then look at iostat it tells me there's a kw/s of 25000. But if i do a dd of=/dev/zero if=/mnt/1 bs=1024k count=1000 then i see only a...

8. Solaris

Move disks to different StorEdge, keeping RAID

Hi. I need to move a 5 disk RAID5 array from a SE3310 box to a different SE3310 array. After installing the disks in the "new" StorEdge device, I "would like" ;) to be able have access to the data which is on the RAID. Essentially, the quesion is, how can this be done? :confused: I checked...

9. Solaris

Hardware RAID not recognize the new disk [Sun T6320]

We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue. We have 2 LDOM configured on this server and this server running on single disk. #...

LEARN ABOUT SUSE

detectups

DETECTUPS(8)						      System Manager's Manual						      DETECTUPS(8)

NAME

       detectups - UPS detection/powerd configuration generator

SYNOPSIS

       /sbin/detectups [tty]

DESCRIPTION

       detectups monitors the serial port connected to an UPS device and will attempt to determine the method of UPS notification of power outage.
       It will ask you to remove the power cord from the wall to the UPS, or push the UPS's test button. It will then determine what all has  hap-
       pened and ask to generate a config file based on your UPS and cable configuration.  detectups needs to watch a tty with modem control prop-
       erties.	Please refer to the powerd documentation for further information.

ARGUMENTS

       Serial-Device Some serial port that is not being used by some other device, and does not share an interrupt with  any  other  serial  port.
       /etc/powerd.conf

FILES

       /etc/powerd.conf    powerd configuration file that		      detectups generates
       /etc/inittab	   init is what actually issues the			shutdown

SEE ALSO

       powerd(8), shutdown(8), wall(1), inittab(5).

AUTHOR

       James Brents <James@nistix.com> (with parts of this man page borrowed from all over the Linux community)

																      DETECTUPS(8)