06-15-2010
ufsrestore T5240
Hi,
Scsi Tape drive is connected with other Sun V440 Server, i have taken the root filesystem ufsdump through ufsdump -0uf servername:/dev/rmt/0n /
if we need to do ufsrestore the root filesystem means need to boot the server using bood cdrom -s then mount the root slice in /mnt and then ufsrestore -rvf /dev/rmt/0n
My query is if we booted the server with cdrom ( single user ) means whether i can able to access remote tape drive
ufsrestore -rvf servername:/dev/rmt/0n this command will work?
Rajasekar
9 More Discussions You Might Find Interesting
1. Solaris
Setting up a T5240 with two disks c1t0d0 and c1t1d0.
I am trying to use raidctl but when I issue.
raidctl -l
I get
Controller 1
Disk: 0.0.0
Disk: 0.1.0
So I try
raidctl -c '0.0.0 0.1.0' -r 1 1
and I get "Array in use."
I try (4 Replies)
Discussion started by: photon
4 Replies
2. Solaris
its a fresh installation. during the OS setup, it did not prompt for IP, netmask and gateway. using Solaris 10 08/07 update 4. I tried to plumb manually but encountered no such interface error. but nxge interfaces can be greped from the /etc/path_to_inst file.
getting similar error on... (3 Replies)
Discussion started by: incredible
3 Replies
3. Solaris
I was trying to configure the netmgmt from the serial and set commitpending to true. However, the netmgmt port is not up and blinking.
I tried to connect using my notebook directly to the netmgmt port and am not able to ping as well. Previouly i was doing the firmware upgrade using the webconsole.... (20 Replies)
Discussion started by: incredible
20 Replies
4. Solaris
Hi,
We are planning to buy new server for our data center. Sun T5240 or M3000 which one have better performance, we are going to create many dt sessions in this server. So, i need your suggestions.
RJS (4 Replies)
Discussion started by: rajasekg
4 Replies
5. Solaris
Hi -
I have a T5240 with 7 LDOMS configured. One night, network comm was broken somehow. Nobody was doing anything on the machine at the time. Here is what I saw in messages:
WARNING: nxge3 : nxge_dma_mem_alloc: ddi_dma_mem_alloc kmem alloc failed
WARNING: nxge3 : nxge_alloc_rx_buf_dma:... (2 Replies)
Discussion started by: pyroman
2 Replies
6. Solaris
Hi Gurus
Can any one tell me the process of disabling the multithreading option on T5240 server and my OS is on LDOM, having one physical processor with 8 core & 8 thread per core
Regards (3 Replies)
Discussion started by: amity
3 Replies
7. Solaris
Hi !
I've been given a T5240 with 4 disks and 2 HBA cards (but no array connected). I did a factory reset on SP and NVRAM clean on OBP because the server had been used before.
I boot cdrom in single mode and try to create a hw mirror with disks from c1... but only c2 is seen by raidctl.
... (2 Replies)
Discussion started by: delavega
2 Replies
8. Solaris
I have a T5240 with 2 T2 US 8 core.. Theoretically how many ldoms can I configure? (5 Replies)
Discussion started by: Iftikhar Barrie
5 Replies
9. Solaris
Hi Folks,
Just a quick question - hopefully!
I have an application currently running on a V890 with Solaris 9, I'd like to move this to either one of our T-5's or one of the T5240's in a Legacy container on an LDOM - but the fly in the ointment is the application still uses a standard Hayes... (3 Replies)
Discussion started by: gull04
3 Replies
tcopy(1) User Commands tcopy(1)
NAME
tcopy - copy a magnetic tape
SYNOPSIS
tcopy source [destination]
DESCRIPTION
The tcopy utility copies the magnetic tape mounted on the tape drive specified by the source argument. The only assumption made about the
contents of a tape is that there are two tape marks at the end.
When only a source drive is specified, tcopy scans the tape, and displays information about the sizes of records and tape files. If a des-
tination is specified, tcopy makes a copies the source tape onto the destination tape, with blocking preserved. As it copies, tcopy pro-
duces the same output as it does when only scanning a tape.
The tcopy utility requires the use of Berkeley-compatible device names. For example,
example% tcopy /dev/rmt/1b /dev/rmt/2b
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWesu |
+-----------------------------+-----------------------------+
SEE ALSO
mt(1), ioctl(2), attributes(5)
NOTES
tcopy will only run on systems supporting an associated set of ioctl(2) requests.
SunOS 5.10 10 Mar 2000 tcopy(1)