Hi,all:
I want to boot an IA unix box from network, I am sure I set the DHCP and boot server, but it still failed !
It says : Client MAC Address: 00 18 FE 28 91 82 .....-
PXE-E16: Valid PXE offer not received.
Load of Core LAN Gb A failed: Not Found
I use the nettl command to trace the UDP... (0 Replies)
I've set up a PXE boot server and I'm having a slight snag in the booting process. On the client machine, DHCP renders fine and TFTP seems to begin but then the system hangs. On the server, the error message "Client does not accept options" occurs -- which from reading online is a common message... (2 Replies)
Hi Experts,
I am doing PXE boot for my GNU/Linux device and pxelinux.0 loads the kernel as well as initrd images I have mentioned in the config file but it looks like it is not considering the init= option. Instead it starts the default INIT program.
I wanted my customized init program to be... (3 Replies)
Hi folks, I was trying to setup Network based NFS installation with PXE.
I'm using virtual box for this purpose. I have one redhat (DHCP) server and Solaris 10 (Install server - Source) and on the other one am trying to install solaris using PXE. As in, dhcp address and boot file can be fetched... (2 Replies)
I have been asked to modify our PXE server such that there will be only one entry in the pxelinux.cfg/default file, where the same kernel and initrd.img will be used regardless of what operating system is to be installed, and the user will type in the path to the kickstart file that will be used. ... (7 Replies)
Hi
Hoping someone can help ove setup a pxe/dhcp boot server for auto installs on centos My server seems to be providing dhcp fine but the installation fails to progress when it reaches the pxe boot menu. I make my selection and nothing happens. I am serving the media via http from the same... (3 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
Hi guys,
I've been trying to set up a server for disk-less booting of remote machines on a network. The server host OS is RHEL6 and I have configured dhcp, tftp and nfs services which are proven to be working since I am able to install RHEL6 through pxe boot. Now I want it to serve for disk-less... (0 Replies)
Hi,
I am doing PXE boot for RHEL6.4 on EFI and want to display custom messsage before loading vmlinuz and initrd.img, which is not working.
boot server side (In case of BIOS client):
In /var/lib/tftpboot/default file I am putting the message in below format:
SAY hello world
boot... (0 Replies)
Discussion started by: indus123
0 Replies
LEARN ABOUT DEBIAN
ifscheme-mapping
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)