How to initialize tape drive Post: 302425412

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Tape drive install

I'm trying to install a tape drive on a compaq SCO OS 505. well I have gone through the mkdev tape comands and what have you yet no luck. when I reboot and do a simple tape rewind it gives me an error no such device etc.etc. IS there a diference in the xct0 and rct0 a the default? help..

2. Linux

Installing tape drive?

Hello. I have Redhat 8.0 on a laptop. Working good. I wanted to install the tape drive that is physically attached to it. The tape drive worked fine under Windows98SE. It's one of those parallel QIC-80 drives and I confirmed that it is supported by FTape. It appears that FTape might already...

3. UNIX for Dummies Questions & Answers

tape drive

Hi, I need to restore my tape backup, when I type "tape status" it gives; status : ready beginning-of-tape write-protected soft errors : 0 hard errors : 0 underruns : 3 but...

4. AIX

Tape Drive

I have tape drive in one Lpar. when i saw that time tape is in defined state. After that i deleted the tape drive using the rmdev -R command. Then fired the cfgmgr -v command. But I am not getting the tape drive. Now the drive is even not in defined state also. It is not shown the tape drive. How...

5. Solaris

Help with tape drive

Hey folks, Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes. I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V. As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly. ...

6. UNIX for Dummies Questions & Answers

Using a remote tape drive.

Hello everyone. I googled a little bit, and the best anwers i had were found in this forum. But , unfortunately, they couldn't give me a solution. So i decided to ask the question completely. I have two servers: One RHEL 5 , x64 , with a SCSI DAT72 Tape Drive. Another (the new one), with...

7. Solaris

[SOLVED] How to initialize LTO5 Tape Drive?

Hi, We replaced one of our tape drives (attached to a SPARC Server) with an LTO5 one (external, attached vi SAS). Manually we check (using tar) that the OS can write data to the Tape Drive, however, the application backup is failing. Since the application takes its own backup, the apps team...

8. HP-UX

TAPE drive

I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help? Thanks in advance

LEARN ABOUT OPENSOLARIS

tcopy

tcopy(1)							   User Commands							  tcopy(1)

NAME

       tcopy - copy a magnetic tape

SYNOPSIS

       tcopy source [destination]

DESCRIPTION

       The  tcopy  utility copies the magnetic tape mounted on the tape drive specified by the source argument. The only assumption made about the
       contents of a tape is that there are two tape marks at the end.

       When only a source drive is specified, tcopy scans the tape, and displays information about the sizes of records and tape files. If a  des-
       tination  is  specified,  tcopy makes a copies the source tape onto the destination tape, with blocking preserved. As it copies, tcopy pro-
       duces the same output as it does when only scanning a tape.

       The tcopy utility requires the use of Berkeley-compatible device names. For example,

	 example% tcopy /dev/rmt/1b /dev/rmt/2b

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWesu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       mt(1), ioctl(2), attributes(5)

NOTES

       tcopy will only run on systems supporting an associated set of  ioctl(2) requests.

SunOS 5.11							    10 Mar 2000 							  tcopy(1)