I have recently aquired the following machine:
IBM,9113-550
Up until yesterday we could connect a dumb terminal to serial port 1 and get console login. However the dumb terminal died. We are now using a laptop with a null modem cable attached to serial port 1. This works perfectly for all of our other pseries servers except this one. As far as I can tell everything is setup the same as the other servers.
getty is running:
Console Assignment:
TTY Config:
Have tried rebooting several times with the laptop connected no output is sent to the laptop. I am using hyperterminal with the following settings:
Any help would be greatly appreciated.
Moderator's Comments:
i added some CODE-tags. Please use them when presenting code or screen output or config files contents. Thank you.
Hi, hope someone could help me here:
Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a... (2 Replies)
Hi friend,
I'm facing a problem to access the console and telnet to the HP ux 11 server due to the system file is full. How to access this server via single mode and how to mount the folder / and folder /var?
thanks.
vestro (1 Reply)
Hi guys,
My current set up is I have a Laptop running redhat linux.
This acts as an SSH server, and i use it to console into the LOM-A port on my Sunfire V100 using minicom. The idea is that I can remotely access and test things out.
This works great, but I've just bought another V100 server... (15 Replies)
Hi :
I have a e450 sun server that I just started up and I connect my laptop to the serial connection using a null modem cable and it just does not connect.
I use hyperterminal, I dont connect a keyboard to the sun machine?
Any ideas?
Thanks a lot
Al (3 Replies)
Hello Folks,
I am having trouble to login to rsc or serial console of V890.
The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting... (8 Replies)
hi,
how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable which needs to be connected to one console server having rj11 on its side and db 9 female on other end.i.e. on switch side,console cable has rj45 and db 9 pin female connector on other side of... (1 Reply)
Hi Guys,
I am working on the e25k server.
There is 4 domain configured
Once domain is down
So I tried to access the console for the problem domain.
using console -d B
but its showing following error message.
bash-2.05$ console -d B
Domain administration permissions... (3 Replies)
When trying to connect to console, I am getting the below error.
plathwsvcd: Another instance is running.
plathwsvcd: Another instance is running.
plathwsvcd: Another instance is running.
plathwsvcd: Another instance is running.
INIT: Id "plhw" respawning too fast: disabled for 5 minutes
... (3 Replies)