Hi guys, I have a big problem wiht my old Netra T1 200. I want to install OpenSolaris 2009 but there's a problem, I burned the ISO image on a CD-RW and then I tryied to install it on netra, but the setup won't to start and the error is that in the attached image.
Thanks for the support and sorry for my bad english!
I am running mandrake 8.2 and when booting I get the message:
e2fschk: Bad magic number in super-block while trying to open /dev/hda8.
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and really contains a valid an ext2 filesystem (and... (1 Reply)
Hi,
when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)
Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
Hello All,
(RHEL4)
Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array.
I somehow managed to up the system with working raid1 array.
But the main problem persisted..
i.e when I reboot the system, mounting... (0 Replies)
Hello All,
I m very new to this forum.
i m having SUN NETRA X1 server with 40 GB HDD (Seagate) & 128 MB RAM.
i m trying this server for SUN 10 Practise.
As i m installing SUN 9 /10 with CD ,its giving me error after OK propmt
***************************
#boot cdrom
or
#boot cdrom... (16 Replies)
I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
Hi,
i got the following error while unpacking the archive file.
cpio -icvd < as_sun_x86_101202_disk2.cpio
Disk2/stage/Components/oracle.webdb.wwdoc/10.1.2.0.1/1/DataFiles/wwdoc.jar
Disk2/stage/Components/oracle.webdb.wwdoc/10.1.2.0.1/1/DataFiles... (2 Replies)
Hello all,
I have a hard drive that I can't repair.
The drive is WD15EARS - Filesystem ext4 ( not 100% sure )
It's used in a Synology DS110j NAS.
I try to run fsck -p /dev/sdb on the HD and I get this:
Bad magic number in super-block while trying to open /dev/sdb
/dev/sdb:
The superblock... (4 Replies)
So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it.
We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
This is first time post...found this forum when looking for possible solution to fix my sun pc. Just one day can't boot it already showing the following:
Boot device: disk File args:
Bad magic number in disk label
Can't open disk label package
Evaluating: boot
Can't open boot device... (40 Replies)
Discussion started by: SHuKoSuGi
40 Replies
LEARN ABOUT LINUX
grub-setup
GRUB-SETUP(8) System Administration Utilities GRUB-SETUP(8)NAME
grub-setup - set up a device to boot using GRUB
SYNOPSIS
grub-setup [OPTION...] DEVICE
DESCRIPTION
Set up images to boot from DEVICE.
You should not normally run this program directly. Use grub-install instead.
-a, --allow-floppy
Make the drive also bootable as floppy (default for fdX devices). May break on some BIOSes.
-b, --boot-image=FILE
Use FILE as the boot image [default=boot.img]
-c, --core-image=FILE
Use FILE as the core image [default=core.img]
-d, --directory=DIR
Use GRUB files in the directory DIR [default=/boot/grub]
-f, --force
Install even if problems are detected
-m, --device-map=FILE
Use FILE as the device map [default=/boot/grub/device.map]
-r, --root-device=DEV
Use DEV as the root device [default=guessed]
-s, --skip-fs-probe
Do not probe for filesystems in DEVICE
-v, --verbose
Print verbose messages.
-?, --help
give this help list
--usage
give a short usage message
-V, --version
print program version
Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options.
DEVICE must be an OS device (e.g. /dev/sda).
REPORTING BUGS
Report bugs to <bug-grub@gnu.org>.
SEE ALSO grub-install(8), grub-mkimage(1), grub-mkrescue(1)
The full documentation for grub-setup is maintained as a Texinfo manual. If the info and grub-setup programs are properly installed at
your site, the command
info grub-setup
should give you access to the complete manual.
grub-setup (GRUB) 1.99-12ubuntu5 October 2011 GRUB-SETUP(8)