boot server / install server Post: 302423847

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

server will not boot

Just got a new sun fire v440 server, try to boot server but server will not boot, got the following error message. "the file just loaded does not appear to be excutedable" boot: cannot open /kernel/sparcv9/unix Enter filename /kernel/sparcv9/unix I thought maybe server is not pre install...

2. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim

3. Solaris

making a boot server

I'm trying to make a boot server so I can net boot another machine that doesnt have a cdrom. I want to boot this machine so i can go in and erase the (unknown to us) root password. on solaris 9, i ran setup_install_server -b /export/install I entered the clients machines mac address and ip in...

4. Solaris

Boot server for solaris 10

Can any one give me the steps to configure a temporary boot server .. so that i can boot one of my failing server which does not have cdrom . I do not want to configure full fledge jumpstart box .. i need it just for recovery purpose. And i want to set it up in one of my other servers .. which...

5. Solaris

configuring boot server

Hi experts, I want to configure a boot server, tried googling for some document for steps and all leads to JumpStart server. Any help with be much appreciated Thanks

6. HP-UX

boot server - sudo

I administer several very old HP 9000 servers that originally were running hp ux 9.04 and are currently at 10.20 with no hope of going to 11.x. My original task was to access the servers remotely via a mech id and with sudo abilities, boot the server. I discovered sudo was not on the servers which...

7. Red Hat

pxe boot server

Hi Hoping someone can help ove setup a pxe/dhcp boot server for auto installs on centos My server seems to be providing dhcp fine but the installation fails to progress when it reaches the pxe boot menu. I make my selection and nothing happens. I am serving the media via http from the same...

8. Solaris

Server Hangs at boot

Hi Guys, I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot" It doesn't boot to the kernel. Is there anyway I can possibly...

9. Red Hat

Moving boot SSD from a dead server to a new server

Hi all, We have a disk array that has the boot drive on an OCZ SSD on a PCIe card. Well, the motherboard died and we got a new motherboard. We moved the controllers, NICs, etc, to the exact same slots on the new motherboard, except now it won't boot. I guess it doesn't recognize the OS on the...

LEARN ABOUT LINUX

grub

GRUB(8)                                                                 FSF                                                                GRUB(8)

NAME

       grub - the grub shell

SYNOPSIS

       grub [OPTION]...

DESCRIPTION

       Enter the GRand Unified Bootloader command shell.

       --batch
              turn on batch mode for non-interactive use

       --boot-drive=DRIVE
              specify stage2 boot_drive [default=0x0]

       --config-file=FILE
              specify stage2 config_file [default=/boot/grub/menu.lst]

       --device-map=FILE
              use the device map file FILE

       --help display this message and exit

       --hold wait until a debugger will attach

       --install-partition=PAR
              specify stage2 install_partition [default=0x20000]

       --no-config-file
              do not use the config file

       --no-curses
              do not use curses

       --no-floppy
              do not probe any floppy drive

       --no-pager
              do not use internal pager

       --preset-menu
              use the preset menu

       --probe-second-floppy
              probe the second floppy drive

       --read-only
              do not write anything to devices

       --verbose
              print verbose messages

       --version
              print version information and exit

REPORTING BUGS

       Report bugs to <bug-grub@gnu.org>.

SEE ALSO

       update-grub(8), grub-install(8).

       The  full documentation for grub is maintained as a Texinfo manual in the grub-legacy-doc package.  If the info and grub programs are prop-
       erly installed at your site, the command

              info grub

       should give you access to the complete manual.

grub (GNU GRUB 0.97)                                               January 2013                                                            GRUB(8)