Hi,
I upgraded solaris 10 x86 from update 3 to update 7 with zones installed n UFS file system . The global zone was updated but the non global zone still shows update 3 what could be the reason for this and how can i update the local zones to update 7 (0 Replies)
I want to basically update an ABE that someone created a few months back.
I'm sure stuff has changed since it was made, and I was going to delete it and create a new one.
But from what I'm looking at, the lumake appears like it would be a faster approach.
I want to use live upgrade to... (0 Replies)
I tried a live upgrade for one my solaris 10u8 server which didnt go sucessfull and after that i now have following mounts in memory.
df: cannot statvfs /.alt.sol10u8_2/var: No such file or directory
df: cannot statvfs /.alt.sol10u8_2/var/run: No such file or directory
df: cannot statvfs... (0 Replies)
Hi Guys, having an issue with running Live Upgrade on a t5240 runiing Solaris 10 5/08.
The system has the required patches 121430, and Live upgrade was updated from the install media sol-10-u10-ga2-sparc-dvd.iso
The following boot environments were created
solenv1 and solenv2 with the... (8 Replies)
I am upgrading Solaris-9 Update-7 to Solaris-9 Update-9 through live upgrade. I am able to create another boot environment and have OS DVD inside server. But i am confused for, what command/path should I give for luupgrade.
OS DVD is mounted on /mnt
Boot environments are Solaris9old (Active now)... (2 Replies)
Hi All,
Is it possible to use external san disk for creating alternate boot environment and boot from it.My root disk is about 70 gb and i want to use external san disk for 272gb to create alternate boot environment.If this is possible can you please redirect me some good documents, i had... (1 Reply)
Hi
I am new to live upgrade.
I would like to tell you about my new setup, where my boot disk(c0d0) is mirrored with secondary disk(c0d1). I have remove the secondary whole disk(C0d1) from the mirror, so that I can do live upgrade on this secondary disk.
I have done live upgrade on s0 partition... (3 Replies)
Hello Guys,
I am a little confused about the first step in the live upgrade process. I will be glad if someone can clarify this for me.
The pre-live upgrade patch, when do you add this patch to the OS you want to upgrade?
1. before creating the new boot environment? or
2. after creating... (1 Reply)
Discussion started by: cjashu
1 Replies
LEARN ABOUT OPENSOLARIS
pcata
pcata(7D) Devices pcata(7D)NAME
pcata - PCMCIA ATA card device driver
SYNOPSIS
pcata@socket#:a -u
pcata@socket#:a -u,raw
DESCRIPTION
The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:
o PC card 2.01 compliance (MBR+fdisk table required for all platforms).
o PC card ATA 2.01 compliance.
o PC card services 2.1 compliance.
The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and
/dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
may have the following:
+----------------+-----------------------------------+---------------------+
|Platform | /devices name | /dev/dsk name |
+----------------+-----------------------------------+---------------------+
|x86 | /devices/isa/pcic@1,3e0 /disk@0:a | /dev/dsk/c1d0s0 |
+----------------+-----------------------------------+---------------------+
|SPARC | /devices/iommu@f,e0000000 | /dev/dsk/c1d0s0 |
| | /sbus@f,e0001000 /SUNW, pcm- | |
| | cia@3,0 /disk@0:a | |
+----------------+-----------------------------------+---------------------+
PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files
created (if they do not already exist).
Known Problems and Limitations
o You need to umount the file system before removing the disk.
o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.
CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.
Initial Installation and Configuration
1. Install the Solaris software.
2. Boot the system.
3. Insert the PC card ATA device.
Identifying an Unrecognized Device
If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.
1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf
output. For example:
# prtconf -D
. . .
pcic, instance #0 (driver name: pcic)
. . .
disk, instance #0
2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware.
Check to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if
it works on the same machine using DOS.
Special Files
For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers
to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
encode the socket number in any part of the name.
Hot-Plugging
o If you want to remove the disk, you must unmount the file system.
o Use the mkfs_pcfs(1M) command to create a pcfs file system:
# mkfs -F pcfs /dev/rdsk/c#d#p0:d
o To mount a pcfs file system, type:
# mount -F pcfs /dev/dsk/c#d#p0:c /mnt
o If you want to create a ufs file system, use the newfs command and type:
# newfs /dev/rdsk/c#d#s#
o To mount a ufs file system, type:
# mount -F ufs /dev/dsk/c#d#s# /mnt
o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man
page.
FILES
/kernel/drv/pcata pcata driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpsdpr |
+-----------------------------+-----------------------------+
SEE ALSO format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)SunOS 5.11 2 Mar 2007 pcata(7D)