05-17-2010
The IBM drives have a hardware compression and feeding them compressed data might well have an adverse effect.
I wonder why you use DAT72 tapes, because the 7214 comes with one of two possible drives: one for DAT160 (80GB) or DAT320 (160GB) tapes or an Ultrium drive for LTO4 tapes (800GB).
The drive you use (obviously the former one) is downward-compatible with DAT72 (and DDS4, for that matter, according to
IBMs product description), but you could simply switch to another medium and use its real capacity.
Btw.: a simple search for "IBM 7214" in Google revealed the mentioned link as first hit and the information about the drive options are near the top of the linked page. It is not forbidden to use Google prior to opening a thread here.
I hope this helps.
bakunin
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
How can I move a file and compress it at the same time? (8 Replies)
Discussion started by: truma1
8 Replies
2. Solaris
How can I tell (from the command line) is compression is turned on for a tape drive?
I need to backup a system that is approx 150gb to a tape that has 110gb uncompress but 220gb available compressed.
Any ideas?
Also is it possible to turn compression on or off from the command line?
I am... (1 Reply)
Discussion started by: frustrated1
1 Replies
3. UNIX for Advanced & Expert Users
Hi,
I' using a sun solaris server, I would like to known if there is the possibility to control how many space is free on a tape and how I can delete a single file on a tape.
Thanks
DOMENICO (3 Replies)
Discussion started by: Minguccio75
3 Replies
4. UNIX for Dummies Questions & Answers
Hi there: I'm new here
Can anyone help me:
I have DS15 Alpha server : Unix 5.1B
Now i need to connect a DLVT VS80 1U Rackmount Tape Drive unit.
What is the exact comman to mount the DLTape IV??
How do i make backuo @ copy file to the tape?
Thanx to all (0 Replies)
Discussion started by: ayzeayem
0 Replies
5. SCO
when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several:
Status : ready beginning-of-tape
soft errors : 0
hard errors: 2
underruns: 5
My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20... (5 Replies)
Discussion started by: psytropic
5 Replies
6. Shell Programming and Scripting
Hi Guys,
totally new to scripting.
I have a huge list of foleders.
I want to tar the contents of each folder inside the same folder and the name of the tar file is the same name as the folder.
how would I go about this in scirpt?
cheers
Viper (3 Replies)
Discussion started by: brownviper1966
3 Replies
7. AIX
Hello,
We need to make a copy of a backup tape, using the 2 tape recorders in IBM 3582 Tape Library
We tried tu use "tcopy", it seems to work fine (no error messages) but we aren't sure if we can rely on it.
my question is how to check if the copy succeded or not, but i also want to know... (3 Replies)
Discussion started by: fastlane3000
3 Replies
8. UNIX for Dummies Questions & Answers
I am using a 4mm tape to backup my Unix system. However, I wanted to make a copy all of the files and archive headers (or just the archive headers if that's possible) created on one of my tapes to another 4mm tape. I only have one tape drive. Is there a command that will complete such task? ... (1 Reply)
Discussion started by: acoco
1 Replies
9. AIX
I am trying to use this command to eject the tape
mt -f /dev/rmt/0 unload
but it gives me error
mt -f /dev/rmt/0 unload
mt: 0511-575 unload is not a recognized subcommand.
Usage: mt Subcommand
Valid subcommands are:
weof
eof
fsf
bsf
... (5 Replies)
Discussion started by: filosophizer
5 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)