I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
Code:
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use is subject to license terms.
WARNING: The following files in / differ from the boot archive:
changed /kernel/drv/md.conf
The recommended action is to reboot and select the "Solaris failsafe" option from the boot menu. Then follow the prompts to update the boot archive. To continue booting at your own risk, you may clear the service by running" "svcadm clear system/boot-archive"
May 17 15:53:47 svc.startd[7]: svc:/system/boot-archive:default: Method "/lib/svc/method/boot-archive" failed with exit status 95.
May 17 15:53:48 svc.startd[7]: system/boot-archive:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):****
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode
May 17 16:05:04 su: 'su root' succeeded for root on /dev/console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
#
When i reboot and select the "solaris failsafe" option as mentioned on the console, i'm getting the following message.
Code:
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use is subject to license terms.
panic[cpu0]/thread=fec1ec20: boot_mapin(): No pp for pfnum = 0
Nothing is displayed after this. Can any one of you suggest me that, What should i need to do to overcome this panic situation?
Last edited by pludi; 05-17-2010 at 08:50 AM..
Reason: code tags, please...
hello guys.
I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message.
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a... (0 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Discussion started by: chacko193
11 Replies
LEARN ABOUT SUNOS
cvcd
cvcd(1M) System Administration Commands cvcd(1M)NAME
cvcd - virtual console daemon
SYNOPSIS
/platform/platform_name/cvcd
DESCRIPTION
The virtual console daemon, cvcd, is a server process that supports the network console provided on some platforms. The cvcd daemon accepts
network console connections from a remote host (only one host at any given time). Console input is read from this connection and forwarded
to cvc(7D) by way of cvcredir(7D).
Similarly, console output is read from cvcredir(7D) and forwarded across the network console connection. If cvcd dies, console traffic is
automatically rerouted through an internal hardware interface.
The cvcd daemon normally starts at system boot time. Each domain supports only one cvcd process at a time.
Caution: On Sun Enterprise 10000 domains, cvcd uses a configuration file (/etc/ssphostname) to determine the name of the host from
which network console connections are allowed. If the remote console host is renamed, you must edit the configuration file
to reflect that change.
OPERANDS
The following operands are supported:
platform_name The official Sun platform name used in packaging and code. For example, for Sun Fire 15K servers, the platform_name
would be SUNW,Sun-Fire-15000.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |Sun Enterprise 10000 |
| |servers, Sun Fire High-End |
| |Systems |
+-----------------------------+-----------------------------+
|Availability |SUNWcvc.u |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), svcadm(1M), services(4), attributes(5), smf(5), cvc(7D), cvcredir(7D)
Sun Enterprise 10000 SSP Reference Manual
System Management Services (SMS) Reference Manual
NOTES
The cvcd service is managed by the service management facility, smf(5), under the service identifier:
svc:/system/cvc
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.10 11 Aug 2004 cvcd(1M)