I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
Code:
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use is subject to license terms.
WARNING: The following files in / differ from the boot archive:
changed /kernel/drv/md.conf
The recommended action is to reboot and select the "Solaris failsafe" option from the boot menu. Then follow the prompts to update the boot archive. To continue booting at your own risk, you may clear the service by running" "svcadm clear system/boot-archive"
May 17 15:53:47 svc.startd[7]: svc:/system/boot-archive:default: Method "/lib/svc/method/boot-archive" failed with exit status 95.
May 17 15:53:48 svc.startd[7]: system/boot-archive:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):****
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode
May 17 16:05:04 su: 'su root' succeeded for root on /dev/console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
#
When i reboot and select the "solaris failsafe" option as mentioned on the console, i'm getting the following message.
Code:
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use is subject to license terms.
panic[cpu0]/thread=fec1ec20: boot_mapin(): No pp for pfnum = 0
Nothing is displayed after this. Can any one of you suggest me that, What should i need to do to overcome this panic situation?
Last edited by pludi; 05-17-2010 at 08:50 AM..
Reason: code tags, please...
hello guys.
I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message.
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a... (0 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Discussion started by: chacko193
11 Replies
LEARN ABOUT SUNOS
root_archive
root_archive(1M)root_archive(1M)NAME
root_archive - manage bootable miniroot archives
SYNOPSIS
/boot/solaris/bin/root_archive pack archive root
/boot/solaris/bin/root_archive unpack archive root
/boot/solaris/bin/root_archive packmedia solaris_image root
/boot/solaris/bin/root_archive unpackmedia solaris_image root
The root_archive utility is used to manage bootable miniroot archives and is currently only available on platforms. The utility can pack
and unpack boot/root archives in both ufs and hsfs (iso9660) format. It will always generate ufs archives.
root_archive also uses the lofi file driver to export a file as a block device (see lofi(7D)) and mount to mount or unmount file systems
and remote resources (see mount(1M)). root_archive requires the same privileges that are needed to run these commands.
SUBCOMMANDS
The root_archive command has the following subcommands:
pack archive root
Pack from the image found under the root directory to the archive.
unpack archive root
Unpack from the archive to an unpacked image under the root directory.
packmedia solaris_image root
Pack the solaris image to the root directory.
unpackmedia solaris_image root
Unpack the solaris image from the root directory.
For packmedia and unpackmedia, other items that do not go into the ramdisk image are copied or uncopied (see cpio(1)) as well. Specifi-
cally, this includes all the packaging databases needed for pkgadd and the other packaging utilities to succeed which are not used in the
running and hence pruned to conserve memory.
EXAMPLES
Example 1: Unpacking the Solaris x86 install image
The following command unpacks the current Solaris image from the root directory:
# root_archive unpackmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
Where /export/nv/solarisdvd.nvx_dvd/latest represents a path to a Solaris x86 install image and /export/Boot is a directory that will be
purged or created, as necessary.
Example 2: Packing the Solaris x86 install image
The following command packs the current Solaris image to the root directory:
# root_archive packmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
The following exit values are returned:
0
The command completed successfully.
1
The command exited due to an error.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
cpio(1), bootadm(1M), mount(1M), attributes(5), lofi(7D)
26 Sep 2005 root_archive(1M)