05-15-2010
Thank you!
Trying now.
Thanks again.
---------- Post updated at 07:05 PM ---------- Previous update was at 06:28 PM ----------
I setted the flow control to xon/xoff. (set flow-contron xon/xoff). I cutted -8 and added -l /bin/bash. And still no output.
When i maked a bridge between pin 2 and 3 i got the typed characters. So, the terminal emulator works well... But none login prompt
How can I do?
Thanks for any help!
---------- Post updated at 07:39 PM ---------- Previous update was at 07:05 PM ----------
I installed putty on the server and i connected to ttyS0. I maked a bridge between pin 2 and 3 (on the server) and i got the typed characters.
So: the serial port works fine in the desktop and in the dos pc. The problem may be: 1- the cable 2- the getty command!
Please help me !!
Thank you again for any answer!
If you need more infos, please ask me!
ps: I use
ubuntu 9.
10 karmic koala, and freebsd
Last edited by mghis; 05-15-2010 at 04:10 PM..
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I am having trouble with a device connected through a serial port on my sun workstation ( I am running solaris 7).
The seriel device works on an identical workstation running the same o/s version but when I move it to the initial workstation it doesn't work. I am using an rs232 serial cable and... (1 Reply)
Discussion started by: Henrik
1 Replies
2. Solaris
we disabled telnet on solaris 9 via previous a thread. We use CMS (call management system) supervisor which used port 23 (telnet). We cannot use telnet via local directive and it was shut down as stated when we shut down telnet in the inetd file. I cannot now log into the CMS box since port 23 is... (3 Replies)
Discussion started by: panzerkw
3 Replies
3. Solaris
Hi,
I'm using Solaris workstation with 5.4 OS.
I was wondering if there's a way that I could
log the data incoming and outgoing on a certain
serial port.
Thanks in Advance! (1 Reply)
Discussion started by: uryuu
1 Replies
4. UNIX for Dummies Questions & Answers
I need make serial data from virtual serial ports available on a TCP/IP network.
For communications with hardware COM ports to send and receive serial data over a local network or the Internet.
Example:
POSIX machine (/dev/ttyS0) <--- TCP/IP ---> Windows machine COM1
Please help! I try use... (0 Replies)
Discussion started by: steel98
0 Replies
5. AIX
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
Discussion started by: pchangba
1 Replies
6. Ubuntu
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
Discussion started by: mvona
5 Replies
7. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
8. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
9. IP Networking
Hi,
I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from... (5 Replies)
Discussion started by: rishav
5 Replies
10. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
mdc(4) Kernel Interfaces Manual mdc(4)
Name
mdc - DS5100 serial line driver
Syntax
device mdc0 at ibus? vector mdcintr
device mdc1 at ibus? vector mdcintr
device mdc2 at ibus? vector mdcintr
Description
A DS5100 base system (mdc0) provides four asynchronous ports. An optional asynchronous card (mdc1 and mdc2 ) can be added to supply eight
additional ports.
The mdc ports are used as follows:
Port Usage Connector
0 Console port 6-pin MMJ on CPU board
1 Local terminal 6-pin MMJ on CPU board
2 Full modem control port 25-pin D-Sub on CPU board
3 Local terminal 6-pin MMJ on CPU board
An optional asynchronous board provides an additional eight lines:
4 Local terminal 6-pin MMJ
5 Local terminal 6-pin MMJ
6 Full modem control port 25-pin D-Sub
7 Local terminal 6-pin MMJ
8 Local terminal 6-pin MMJ
9 Local terminal 6-pin MMJ
10 Local terminal 6-pin MMJ
11 Local terminal 6-pin MMJ
The console baud rate is set to 9600 baud by default. You can change this by setting the baud environment variable from console prompt.
Each communication port from the serial line controller behaves as described in the reference page and can be set to run at any of 16
speeds. For the encoding, see
You can establish the state of port 2 (port 6) by specifying either modem or nomodem as part of the file entry.
Restrictions
The speed default is to 9600 baud on the console port. The console device must be set for 8-bit character length with one stop bit and no
parity. The driver enforces these restrictions; that is, changing speeds with the command may not always work on console ports.
Files
Console terminal
Full modem control or local terminal
See Also
console(4), devio(4), tty(4), ttys(5), MAKEDEV(8)
RISC mdc(4)