05-08-2010
Quote:
Originally Posted by
fpmurphy
I see you have other network adapters in your systems. Are they in use?
I wondered too. I assumed it's a two-port nic and wondered why eth2 and not eth0 or eth1. Besides I looked at the support pages @ hp.com, namely the driver download section and I found the driver the OP has mentioned (e1000), but there is a e1000e too. I don't know what's the difference between them. There are even at least two non-intel drivers (Broadcom, QLogic)
This User Gave Thanks to pseudocoder For This Post:
9 More Discussions You Might Find Interesting
1. Solaris
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Discussion started by: waterbear
2 Replies
2. High Performance Computing
Hi grus,
has anybody tried for Sun cluster interconnect normal cable ,, I mean not interconnect .. What do u think ..does it support this ?
Not long ago I tried Veritas cluster and its interconnections work great with normal cable .. I wonder what will Sun cluster say to it :)) (3 Replies)
Discussion started by: samar
3 Replies
3. Red Hat
hi..
I unplug my eth0 lan cable.. and suddenly my system shutdown... no idea :eek::confused: (3 Replies)
Discussion started by: flekzout
3 Replies
4. IP Networking
Hi, I am trying to implement a server-client socket communication. My server and clients are in different PCs. During communications if the ethernet cable is removed from the server side it shows broken pipe due to unable to write on the socket. I want to know how to check whether the ethernet... (0 Replies)
Discussion started by: JagadishB
0 Replies
5. UNIX for Dummies Questions & Answers
how to change ethernet cable of iscsi initiator (iscsi client) (0 Replies)
Discussion started by: pankajd
0 Replies
6. Programming
Hi,
I want to code TCP/IP client/server in linux application capable to fastly detect ethernet cable disconnection in any condition.
So I have activate SO_KEEPALIVE options and set TCP_KEEPCNT, TCP_KEEPIDLE and TCP_KEEPINTVL to 1.
When I disconnect ethernet cable I have the following... (5 Replies)
Discussion started by: jeje_clb
5 Replies
7. Red Hat
I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable
Reboot with lan cable:
The hostname is ubunut
Unable to connect Oracle database using sqlplus some times database is not... (2 Replies)
Discussion started by: LinuxLearner
2 Replies
8. AIX
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Discussion started by: newtoaixos
1 Replies
9. AIX
Hi Techies,
I have a doubt.
ent0 Available Logical Host Ethernet Port (lp-hea)
ent1 Available Logical Host Ethernet Port (lp-hea)
ent2 Available Logical Host Ethernet Port (lp-hea)
ent3 Available Logical Host Ethernet Port (lp-hea)
ent4 Available... (4 Replies)
Discussion started by: jayadeava
4 Replies
LIEBERT(8) NUT Manual LIEBERT(8)
NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)