---------- Post updated at 10:55 ---------- Previous update was at 10:53 ----------
Yes, you may have to restart services depending on the changes you made. If you can restart the server, then you don't have to bother to create a copy of the network script.
hi, what this command will do sed 's/shcat/cat/g' /etc/init.d/network >/etc/init.d/mynetwork, is it going to replace shcat with cat
Hi linux pals,
I am installing red hat linux 7.2 on my laptop which already has a windows XP installation on it. After successful installation when i boot to the linux system the system hangs showing the following error:
Kernel panic: No init found. Try passing init= option to kernel
I... (5 Replies)
Hi Expert,
I have encountered some problem with my SUN system. Everytime when i issue command #init 6 OR #init 0 it just logout and prompt for login again instead of rebooting the server when run init 6 and system shutdown when run init 0..
I can only reboot the system using reboot ... Was... (6 Replies)
helo,
my system is runing on redhat 9.0.
but now when i run my machine i got the following error.
Kernel Panic:No init found.
try passing init = option to kernel.
i dont have any idea about linux administration.
can u help me to solve this error
Thanks and Regards,... (2 Replies)
I've had no luck with help on linuxquestions so I figured I'd try here. I'm using debian etch.
The problem is that I can not install my network card because it says:
Makefile:62: *** Linux kernel source not found. Stop.
I have the kernel-headers installed.
I've looked all over the... (9 Replies)
Hello,
I have just installed Solaris 9 x86 in a VMWare and the 1st problem I have is to enable the networking. I can only see the loopback interface and nothing else.
- I dont have any /etc/hostnames.xxx
- ifconfig -a shows only the loopback
- kstat -c net shows only the loopback ...
Any... (11 Replies)
Dear all,
I typed in init 1 on my redhat box as root and according to wikipedia (http://en.wikipedia.org/wiki/Runlevel):
1 Single-User Mode Does not configure network interfaces, start daemons, or allow non-root logins
So now I can't connect back to it. How do I change the init back to 3?... (8 Replies)
Hi,
I am experiencing a weird thing on my SUNFIRE machine with Solaris 9 OS.
When I do init 0 to shutdown the machine to go to ok prompt, what it did was shutdown and reboot like an init 6 command do. I did check the corresponding rc scripts that were involved with init 0 and compared with rc... (2 Replies)
I encountered a problem on one of our database servers.
OS: CentOS 5.5 final
Kernel: 2.6.18-238.5.1.el5.028stab085.2 (OpenVZ kernel)
We wrote some DB-Start/Stop-scripts ("/db2/admin/scripts_dba/start_services.ksh" and ".../stop_services.ksh") to start the database instances. (Database... (1 Reply)
Hello
I am new to solaris samba. After configuring samba through swat I can see the the machine listed under windows workgroup computers. when selected it shows the shared directories, But when trying to connect to shares shows a error network path not found.
At the same time solaris network... (5 Replies)
Assalam o Alaikum!
After configuring and starting service of samba, when I access shared folder from windows XP it gives this error " Network Route was not found".
My server IP 192.168.1.252, client is on same network.
selinux is disabled
smb,conf:
workgroup = WORKGROUP
server string =... (2 Replies)
Discussion started by: ukengr
2 Replies
LEARN ABOUT OSF1
local.users
local.users(4) Kernel Interfaces Manual local.users(4)NAME
local.users - Specifies mail recipients on the local host.
DESCRIPTION
The local.users file contains a list of user names whose mail is to be delivered to the local host and whose return address is user-
name@hostname. Entries in the local.hosts file are in addition to other local users (such as root and postmaster). See sendmail.cf(4) for
a description of other local users.
You can add entries to this file if the host is configured as a simple client and either of the following is true: The user wants their
mail delivered on this machine rather than being forwarded to the mail server. You are adding aliases to the /var/adm/sendmail/aliases
file. When the host is configured as a simple client, the alias must be added to this file and the aliases file.
A simple client is defined as a host that had the mail system configured using the MailConfig application from the System Management utili-
ties or configured using the mailsetup utility's Quick Setup menu.
The format of the file is as follows: User names are separated by blanks or new lines. Multiple user name can be specified on a line.
Blank lines are ignored. A comment mark (#) ends the line.
After modifying the local.users file, you must restart the sendmail daemon to apply the changes. Use the following command: #
/sbin/init.d/sendmail restart
EXAMPLES
root postmaster rw # A comment followed by an ignored blank line.
# Another comment. mariah # Another comment.
carey # Leading blanks are acceptable.
FILES
Specifies the path name for the file.
RELATED INFORMATION
Files: sendmail.cf(4). delim off
local.users(4)