Seems like your tcp/ip routing is not set up correct. You might have to add a net route from your AIX box to the 122.0.0... network it seems. Not sure about network adapters in your box but if you connect with 1 special adapter to the 122.0.0... net, you will have to set the route on this adapter.
Please post a
from your AIX box that can't reach the 122.0.0.... network and use code tags please, ty.
Maybe there is just missing a default gatway entry - we will see.
Hello everyone!
I searched high and low in the forum's on this site before I started a thread, but couldn't quite find my resolution. Even though I got good hits on SFTP.
I'm working on a script on my AIX 5.3 system to sftp (OpenSSH) files to another remote site that is running "Secure FTP"... (2 Replies)
Hi,
Unix based,
My harddrive won't boot and I'm looking for a reliable tool
that can mount a hdd on Windows XP and show me the files
stored on a NFS system.
I tried the tool: Ext2IFS but this didn't work.
I found a lot of tools on google to mount nfs share thru a network
but that's... (1 Reply)
this is probably a bit dumb ...but i read somewhere that one of the nfs versions can be mounted on a windows 2003 server ..if yes ..does anyone know how this can be achieved (1 Reply)
Hi, How can i mount an NFS share on a solaris machine a filesystem ?
I have enabled nfs on a windows server and the shares has given read/write access to it to all the users. I would like to mount it on around 10 different solaris boxes with different versions of solaris.
Thanks in advance. (2 Replies)
Hi,
I have two machines (AIX) each on a different VLAN.
Need to mount a filesystem using nfs on the other one.
When I export the nfs file system its a breeze. But when I try to mount it on the other machine the smitty command hangs on "running" and i get an OK from smitty but with this... (6 Replies)
The UPS connected to the Disk Array portion of my Windows 2003 NAS burned up over the weekend. Reconnected it to a new UPS and re-booted the NAS box. Since then I have not been able to get my HPUX 10.2 box to mount the shared drives on the NAS. At boot, the NFS client & server subsystems do a... (0 Replies)
Hello,
I would like to share a 9p (Plan 9) passthrough/share to a VM via NFS (using a guest as an NFS server to share a directory from the host)
At the moment I am getting the error message: 'exportfs: /share does not support NFS export'... (2 Replies)
I am trying to set a share between windows and an AIX server. I was able to do this to a windows 2008 server. I am now trying to get this to worked on a windows 7 enterprise pc. below is what i get. I have turned off the firewall wall in windows the user is an admin in the pc. same account works... (6 Replies)
Hi All,
Is there a command or script which will push a file from Windows server to Linux box? using the mount command. I want the details or document of the whole process please.
I want this script to run every 30 minutes to push the file from windows to unix
Thanks (16 Replies)
Discussion started by: thinkingeye
16 Replies
LEARN ABOUT ULTRIX
route
route(8c)route(8c)Name
route - manually manipulate the routing tables
Syntax
/etc/route [ -f ] [ -n ] command args ]
Description
The program is used to manipulate the network routing tables manually. However, normally it is not needed, as the system routing table
management daemon, should tend to this task.
The program accepts two commands: add, to add a route and delete, to delete a route.
All commands have the following syntax:
/etc/route command [ net | host ] destination gateway [ metric ]
In this syntax, destination is a host or network for which the route is to, gateway is the gateway to which packets should be addressed,
and metric is an optional count indicating the number of hops to the destination. The metric is required for add commands. It must be
zero if the destination is on a directly-attached network, and nonzero if the route utilizes one or more gateways.
When adding a route with metric 0, the gateway given is the address of this host on the common network, indicating the interface to be used
for transmission. Routes to a particular host are distinguished from routes to a network by interpreting the Internet address associated
with destination. The optional keywords net and host force the destination to be interpreted as a network or host, respectively. If the
destination has a local address part of INADDR_ANY, then the route is assumed to be to a network. Otherwise, it is presumed to be a route
to a host. If the route is to a destination connected via a gateway, the metric should be greater than 0. All symbolic names specified
for a destination or gateway are looked up first as a host name using If this lookup fails, is then used to interpret the name as that of a
network.
The command uses a raw socket and the SIOCADDRT and SIOCDELRT ioctls to do its work. As such, only the superuser can modify the routing
tables.
Options-f Flushes the routing tables of all gateway entries. If is used with one of the commands described above, the tables are flushed prior
to the command's application.
-n Prevents attempts to print host and network names symbolically when reporting actions.
Restrictions
The change operation is not implemented. Therefore, you should first add the new route, and then delete the old one.
Diagnostics
add [host | network] %s: gateway %s flags %x"
The specified route is being added to the tables. The values printed are from the routing table entry supplied in the ioctl call. If the
gateway address used was not the primary address of the gateway (the first one returned by the gateway address is printed numerically as
well as symbolically.
delete [ host | network] %s: gateway %s flags %x
The specified route is being deleted from the tables. The values printed are from the routing table entry supplied in the ioctl call. If
the gateway address used was not the primary address of the gateway (the first one returned by the gateway address is printed numerically
as well as symbolically.
%s %s done
When the flag is specified, each routing table entry that is deleted is indicated with a message of this form.
Network is unreachable
An attempt to add a route failed because the gateway listed was not on a directly-connected network. The next-hop gateway must be given.
not in table
A delete operation was attempted for an entry which was not present in the tables.
routing table overflow
An add operation was attempted, but the system was low on resources and was unable to allocate memory to create the new entry.
See Alsointro(4n), routed(8c)route(8c)