Hi,
I upgraded solaris 10 x86 from update 3 to update 7 with zones installed n UFS file system . The global zone was updated but the non global zone still shows update 3 what could be the reason for this and how can i update the local zones to update 7 (0 Replies)
Hi, Guys
On this weekend I have to upgrade Solaris 10 2 node SUN cluster from u4 to u9. I have not touch Sun cluster for a while so I need some help. Can anybody let me know what I have to do specifically for this upgrade?
Thank you very much (4 Replies)
I want to basically update an ABE that someone created a few months back.
I'm sure stuff has changed since it was made, and I was going to delete it and create a new one.
But from what I'm looking at, the lumake appears like it would be a faster approach.
I want to use live upgrade to... (0 Replies)
I tried a live upgrade for one my solaris 10u8 server which didnt go sucessfull and after that i now have following mounts in memory.
df: cannot statvfs /.alt.sol10u8_2/var: No such file or directory
df: cannot statvfs /.alt.sol10u8_2/var/run: No such file or directory
df: cannot statvfs... (0 Replies)
Hi All,
Is it possible to use external san disk for creating alternate boot environment and boot from it.My root disk is about 70 gb and i want to use external san disk for 272gb to create alternate boot environment.If this is possible can you please redirect me some good documents, i had... (1 Reply)
Hello Guys,
I am a little confused about the first step in the live upgrade process. I will be glad if someone can clarify this for me.
The pre-live upgrade patch, when do you add this patch to the OS you want to upgrade?
1. before creating the new boot environment? or
2. after creating... (1 Reply)
Hello Team,
Am trying to upgrade the AIX 6.1 TL 7 to TL 8. My rootvg is mirrored so i have unmirrored and taken out the secondary disk and trying to install the update via smitty alt_clone.
The filesets has been installed and finally when making the updated disk as bootable bosboot... (6 Replies)
My OS solarius 5.10 Generic_147148-2 i86
Error: please review new boots environments using options
1. Solution - show me the commands
Partition is full, try to remove some unneeded files,
then try to compress some other unneeded files.
man command creates a temp file under... (0 Replies)
Discussion started by: zbest1966
0 Replies
LEARN ABOUT SUNOS
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)