where can i modify default gateway Post: 302415864

9 More Discussions You Might Find Interesting

1. HP-UX

How to add another default gateway

I am using HP-UX 11i and I need to add another default gateway. how can I do that ?

2. Solaris

How can I change the default gateway?

my actual default gatewas IP is: default 192.168.11.254 and I need to change it to 192.168.11.2, I'm using Solaris 9, how can i do it? and how i can save it in case that the machine restart and have the new default gateway IP saved?

3. IP Networking

default gateway in unix?

i'm a real unix newbie, setting up a network, with a router to router vpn connection with a remote site, all the win stuff is talking and pinging and all the stuff it should be doing (yeah and crashing too, lol) but no communication with the unix box, i think the problem is with my default...

4. AIX

Help with Default Gateway

Hi, I have two interfaces on m AIX 5.3 box. One going to 192.168.1.x and it has a gateway of 192.168.1.1. I configured the other gateway with 192.168.2.x and the default gateway as 192.168.2.1. But I can't get connectivity to the 192.168.2.1 network. Can someone help me out and let me know...

5. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ...

6. UNIX for Dummies Questions & Answers

Cannot ping default gateway

I have NCR MP-RAS unix. I have been trying for several months to get our network working since we had never used it before. I have setup all routes that I can think of. I know it has something to do with the routing table, because out of sheer luck I was able to get it working, and than like a...

7. Red Hat

Can not ping default gateway

Hi, Here is the issue: There are 2 identical systems in the same subnet here. They can ping and ssh each other. One can ping the default gateway and one can not with error '... icmp_seq Destination Host Unreachable'. I can't find any difference between the two systems in terms of network...

8. IP Networking

Default Gateway

I am am using IPv6 IP's with an OS of Debian. Is it possible to set a *static* default gateway w/o the router being connected? Will that gateway change when the router is connected? TIA

9. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different....

LEARN ABOUT DEBIAN

kumo-gateway

KUMO-GATEWAY(1) 					      General Commands Manual						   KUMO-GATEWAY(1)

NAME

       kumo-gateway - kumofs gateway daemon

SYNOPSIS

       kumo-gateway -m <addr[:port]> -p <addr[:port]> [-t port] [-b port] [-c port]

DESCRIPTION

       kumo-gateway  receives  requests  from applications and relays it to the kumo-servers.  Run this daemon on the hosts that runs applications
       that uses kumofs.

OPTIONS

       -m <addr[:port=19700]> --manager1
	      address of manager 1

       -p <addr[:port=19700]> --manager2
	      address of manager 2

       -lc --local-cache
	      local cache (Tokyo Cabinet abstract database)

       -t <[addr:]port=11411> --memproto-text
	      memcached text protocol listen port

       -b <[addr:]port=11511> --memproto-binary
	      memcached binary protocol listen port

       -c <[addr:]port=11611> --cloudy
	      asynchronous memcached binary protocol listen port

       -F --memproto-save-flag
	      save flags on memcached text protocol

       -As --async-replicate-set
	      send response without waiting replication on set

       -Ad --async-replicate-delete
	      send response without waiting replication on delete

       -G <number=5> --get-retry
	      get retry limit

       -S <number=20> --set-retry
	      set retry limit

       -D <number=20> --delete-retry
	      delete retry limit

       -rn <number=4> --renew-threshold
	      hash space renew threshold

       -k <number=2> --keepalive-interval
	      keepalive interval in seconds

       -Ys <number=1> --connect-timeout
	      connect timeout time in seconds

       -Yn <number=4> --connect-retry-limit
	      connect retry limit

       -Ci <number=2> --clock-interval
	      clock interval in seconds

       -TW <number=2> --write-threads
	      number of threads for asynchronous writing

       -TR <number=4> --read-threads
	      number of threads for asynchronous reading

       -o <path.log> --log
	      output logs to the file

       -g <path.mpac> --binary-log
	      enable binary log

       -v --verbose

       -d <path.pid> --daemon

EXAMPLE

       [on cli1  ]$ kumo-gateway -v -m mgr1 -p mgr2 -t 11211 -As -Ad

       [localhost]$ kumo-gateway -v -m localhost -t 11211 -d kumo-gateway.pid

SEE ALSO

       kumolog(1).

kumo-gateway							     July 2009							   KUMO-GATEWAY(1)