system restarts after shutdown!! Post: 302415820

5 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Shutdown a system by MAC?

Ok here is the problem we have 2 v440 with same IP address running solars 9. one remains on the other remains off. They are both configured exactly the same for redundant purposes for the software we use. This was the best/worst idea. Great because down time is only a mere minutes. The bad is the...

2. Solaris

logs for system shutdown

I am working on a SUN T2000 machine with Solaris 10 running on it. When I checked the system this morning, I found it to be turned off. The lastreboot command showed that the system had been shut down the previous night. I want to find out how the system was shut down. I have run hardware health...

3. Solaris

Shutdown system option

I am working on sunos solaris. I want to know which is good for system shut-down ?

4. Red Hat

shutdown system/myeclipse

Hi All, I have one situation to shut-down the system through shell script.I need script command to shut-down the system and process should end(safe-mode) the MyEclipse.

5. Programming

Problem on capturing system Shutdown

I am having exactly the same problem with https://www.unix.com/programming/129264-application-cleanup-during-linux-shutdown.html but the thread is old and closed. The only difference is that I use sigaction() instead of signal(), which is recommended, as far as I know. This is my code: ...

LEARN ABOUT DEBIAN

pm-is-supported

PM-IS-SUPPORTED(1)					       pm-utils User Manual						PM-IS-SUPPORTED(1)

NAME

       pm-is-supported - Test whether suspend or hibernate is supported.

SYNOPSIS

       pm-is-supported [{--suspend | --hibernate | --suspend-hybrid}]

DESCRIPTION

       This manual page documents briefly the pm-is-supported command.

       The intended purpose of pm-is-supported is to find out which power management modes are supported by the system. hald(8) will call it to do
       just that. (Note that UPower does not use this.)

OPTIONS

       --suspend
	   Test whether suspend is supported. Suspend is a state where most devices are shutdown, except for RAM. This state still draws power.

       --hibernate
	   Test whether hibernate is supported. During hibernate the state of the system is saved to disk, the system is fully powered off.

       --suspend-hybrid
	   Test whether hybrid-suspend is supported. Hybrid-suspend is the process where first the state of the system is saved to disk -- just
	   like with hibernate -- but instead of poweroff, the system goes in suspend state, which means it can wakeup quicker than for normal
	   hibernation. The advantage over suspend is that you can resume even if you run out of power. s2both is a hybrid-suspend implementation.

RETURN VALUE

       The result of the test for a certain powermanagement state is defined by the following exit codes.

       Code   Diagnostic
       0      State available.
       1      State NOT available.

SEE ALSO

       hald(8), pm-suspend(8), s2both(8), UPower(7)

AUTHOR

       Tim Dijkstra <tim@famdijkstra.org>
	   Manpage author.

COPYRIGHT

       Copyright (C) 2007 Tim Dijkstra

       This manual page was originally written for the Debian(TM) system, and has been adopted by the pm-utils project.

       Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 or (at
       your option) any later version published by the Free Software Foundation.

pm-is-supported 						   Apr 18, 2007 						PM-IS-SUPPORTED(1)