My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
I have tried with several new tapes, even I changed the tape drive but error is same, any thoughts?
Thanks for checking in.
We have this script that does a backup called Ignite on HP-UX
in this script it does everything it supposed to do accept one thing
Script
#########################################
echo
clear
cd /
echo " Please ensure there is a DLT tape in Slot 6 of the Tape... (2 Replies)
I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command...
tar tvf /dev/rmt0
...and I keep getting the following error message:
tar: 0511-193 An error occurred while reading from the media.
There is not enough memory available now.
I've googled this error... (2 Replies)
Server 1 - Sun Solaris 5.8 sparc SUNW,Sun-Fire-480R with attached DLT tape drive /dev/rmt/0n
Server 2 - Old DG-UX box which has restore command on it compatible with the files on the backyup tape - backed up with dump2
Server 3 - Sun solaris 5.9 sparc SUNW,Sun-Fire-V490 with lots of free space... (4 Replies)
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
Dear all,
I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive.
I have fired the command lsdev -Cc tape but no reply.
how will i configure the tape in LPAR?
Please suggest. It is very urgent. (3 Replies)
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Hello All,
I have HP Openview storage data protector version 5.5. When I am going to write my backup I have an error message saying "Connot Open Device /dev/rmt/0mn"
Follownig is my output:
# ls -l /dev/rmt/0mn
crw-rw-rw- 2 bin bin 205 0x080140 Jan 17 16:41 /dev/rmt/0mn
# uname -a... (2 Replies)
Hi Everyone,
The machine I'm working on is an AIX 5.3 LPAR running on a P650. oslevel -r shows 5300-08. I'm trying to take a backup to a SCSI tape drive, which has been working up until this point. I know of nothing that has changed recently to cause this problem. But when I try to take a... (0 Replies)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)