I have done a reboot for SUN Solaris 8 ( model SUNFIRE 280R)
but i havent got the OK prompt i only got the following:
Code:
RSC2 POST - Version 10-18-2000 0.7
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake Did not get a boot protocol message.
RSC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection:
SC <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external serial ports baud rate
i - Set internal serial ports baud rate
t - Toggle 'OK' flag
R - Reset RSC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: R
} Welcome to RSC bootmon v2.0.0
Reset register: 00000000
-------------------------------------------------------------------------
I tried to send break i gave me the last options and i selected nearly all of them but without any hope to get the OK prompt to boot from hard disk!!!
and when i keep the RSC continue to the end it asks for user login
i enter the root and password but no hope!!!
So Please what to do in this case!!
its very urgent to solve this issue and to get the server LIVE :-(
Last edited by Scott; 04-17-2010 at 06:37 PM..
Reason: Please use code tags
Has anyone had a message after attempting a telnet to an RSC server of:
"Console session already in use." I'm attempting to access this server to setup a user account, and I'm having some problems. Does anyone have an
idea or suggestion on how to proceed? (0 Replies)
Hi all,
After the V890 server shutdown unexpectedly, it became unaccessible from RSC. There is one error message about it: rscadm: RSC firmware not responding
Do you have experienced this? Please help! (1 Reply)
Hi I have a SUN box that i am supporting Model 480r . The RS card that is attached to it is giving some problems . It is pinging but i am unable to telnet into it therefore having no remote TC console access ( the system is currently up )
Is there a way by which i can remotely check the... (1 Reply)
Hello Folks,
I am having trouble to login to rsc or serial console of V890.
The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting... (8 Replies)
Hi All, ;)
I have configured rsc hosted on Sun-Fire-V490.
But I am not able to telnet this machine
Packages installed :
#pkginfo -l | grep SUNWrsc
PKGINST: SUNWrsc
PKGINST: SUNWrscd
PKGINST: SUNWrscj
I rebooted system but still I' not able to take rsc.
I am not... (3 Replies)
I have a disk failure in a V280, the support tech asked for explorer output and rsc information
sc>showsc
rsc>environment
rsc>loghistory
rsc>consolehistory
rsc>version -v
since RSC is not a secure connection, I am not comfortable with providing this information for a disk... (2 Replies)
Dear all
Can you help me to reset RSC from Sun V490
Inside this machine the Operating System is broken..
please help guys
thanks (1 Reply)
Discussion started by: gema.utama
1 Replies
LEARN ABOUT DEBIAN
test::unit::assertion::coderef
Test::Unit::Assertion::CodeRef(3pm) User Contributed Perl Documentation Test::Unit::Assertion::CodeRef(3pm)NAME
Test::Unit::Assertion::CodeRef - A delayed evaluation assertion using a Coderef
SYNOPSIS
require Test::Unit::Assertion::CodeRef;
my $assert_eq =
Test::Unit::Assertion::CodeRef->new(sub {
$_[0] eq $_[1]
or Test::Unit::Failure->throw(-text =>
"Expected '$_[0]', got '$_[1]'
");
});
$assert_eq->do_assertion('foo', 'bar');
Although this is how you'd use Test::Unit::Assertion::CodeRef directly, it is more usually used indirectly via Test::Unit::Test::assert,
which instantiates a Test::Unit::Assertion::CodeRef when passed a Coderef as its first argument.
IMPLEMENTS
Test::Unit::Assertion::CodeRef implements the Test::Unit::Assertion interface, which means it can be plugged into the Test::Unit::TestCase
and friends' "assert" method with no ill effects.
DESCRIPTION
This class is used by the framework to allow us to do assertions in a 'functional' manner. It is typically used generated automagically in
code like:
$self->assert(sub {
$_[0] == $_[1]
or $self->fail("Expected $_[0], got $_[1]");
}, 1, 2);
(Note that if Damian Conway's Perl6 RFC for currying ever comes to pass then we'll be able to do this as:
$self->assert(^1 == ^2 || $self->fail("Expected ^1, got ^2"), 1, 2)
which will be nice...)
If you have a working B::Deparse installed with your perl installation then, if an assertion fails, you'll see a listing of the decompiled
coderef (which will be sadly devoid of comments, but should still be useful)
AUTHOR
Copyright (c) 2001 Piers Cawley <pdcawley@iterative-software.com>.
All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
SEE ALSO
o Test::Unit::TestCase
o Test::Unit::Assertion
perl v5.8.8 2006-09-13 Test::Unit::Assertion::CodeRef(3pm)