Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Problem to recognize a storage A5100
Top Forums UNIX for Dummies Questions & Answers Problem to recognize a storage A5100 Post 302411894 by RTM on Friday 9th of April 2010 04:58:37 PM
Old 04-09-2010
You could try running luxadm commands to see if those show you anything...

luxadm insert_device (sorry, didn't have an example in my old notes)

luxadm probe command should show any connected arrays/disks on the fiber connection
Code:
# luxadm probe
Found Enclosure(s):
SENA               Name:oltp-a   Node WWN:5080020000021a20   
  Logical Path:/dev/es/ses0
  Logical Path:/dev/es/ses1
SENA               Name:oltp-b   Node WWN:5080020000021f48   
  Logical Path:/dev/es/ses2
  Logical Path:/dev/es/ses3
SENA               Name:oltp-d   Node WWN:5080020000026c28   
  Logical Path:/dev/es/ses4
  Logical Path:/dev/es/ses5
SENA               Name:oltp-c   Node WWN:5080020000026dc8   
  Logical Path:/dev/es/ses6
  Logical Path:/dev/es/ses7

If there is something there, you can look at the one specific array...
Code:
# luxadm display oltp-b

                          (luxadm version: 1.45  SunOS 5.6)
                                   SENA            
                                 DISK STATUS 
SLOT   FRONT DISKS       (Node WWN)          REAR DISKS        (Node WWN)
0      On (O.K.)         20000020370e855c    On (O.K.)         20000020370e1fb1
1      On (O.K.)         20000020370e801e    On (O.K.)         20000020372d1678
2      On (O.K.)         20000020370e72cf    On (O.K.)         20000020370e6cfc
3      On (O.K.)         20000020370e8266    On (O.K.)         20000020370e6db1
4      On (O.K.)         20000020370e840c    On (O.K.)         20000020370973b5
5      On(No UNIX Label) 20000020370e7dd8    On (O.K.)         20000020370e6ddc
6      On (O.K.)         20000020370e8602    On (O.K.)         20000020370e6908
                                SUBSYSTEM STATUS
FW Revision:1.08   Box ID:1   Node WWN:5080020000021f48   Enclosure Name:oltp-b
Power Supplies (0,2 in front, 1 in rear)
        0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
        0 O.K.(rev.-05) 1 O.K.(rev.-00)
ESI Interface board(IB) (A top, B bottom)
        A: O.K.(rev.-04)
                GBIC module (1 on left, 0 on right in IB)
                0 O.K.(mod.-05)
                1 Not Installed
        B: O.K.(rev.-04)
                GBIC module (1 on left, 0 on right in IB)
                0 O.K.(mod.-05)
                1 Not Installed
Disk backplane (0 in front, 1 in rear)
        Front Backplane: O.K.(rev.-04)
          Temperature sensors (on front backplane)
          0:37ºC 1:39ºC 2:37ºC 3:37ºC 4:36ºC 5:37ºC 
          6:37ºC  (All temperatures are NORMAL.)
        Rear Backplane:  O.K.(rev.-04)
          Temperature sensors (on rear backplane)
          0:36ºC 1:37ºC 2:39ºC 3:37ºC 4:37ºC 5:37ºC 
          6:39ºC  (All temperatures are NORMAL.)
Interconnect assembly
        O.K.(rev.-02)
Loop  configuration
        Loop A is configured as a single loop.
        Loop B is configured as a single loop.
Language        USA English

 

8 More Discussions You Might Find Interesting

1. Linux

Some problem about usb mass storage device

Dear linuxers, I have a usb mess storage device. My OS is rh as3 update2. Each time I use the command mount -t vfat /dev/sda1 /mnt/usb I got the error "the device is not a valid block device". I found from google that I should install the module sd_mod I use the command insmod sd_mod... (2 Replies)
Discussion started by: niukun
2 Replies

2. Shell Programming and Scripting

Problem with storage of PID's to variables

I have the following problem to be solved: I read a .csv file (tempfile), fetch the values into variables F1 to F5. Variables F1, F2, F3 are parameters used for running a program (blablaprogram). Variable F4 I want to use to store the PID-value in and variable F5 is used for storing the return... (3 Replies)
Discussion started by: zwiebertje11
3 Replies

3. Solaris

Sun storage L7 Problem

Dear Expert , We have L7 , when we power on we see on lcd messages "drive Post E" , According sun Doc SunSolve , there problem picker or Driver , I try move slot to slot successfully, On Lcd panel i can not see load drive (look like any inside tape in drive , but when i am select eject menu,... (0 Replies)
Discussion started by: hadibn
0 Replies

4. Solaris

Problem with storage

In the /var/adm/messages, i am getting the following error : Apr 16 23:49:37 inijsce1 EV_AGENT: Time Stamp 04/16/09 23:07:23 Event Number 2580 Severity Error Host inijscx33-adm Storage Array 6ASL102123 SP N/A SoftwareRev 6.19.1 (3.0) Unknown Error 2.19.0.300.5.027 Description Storage Array... (3 Replies)
Discussion started by: sundar3350
3 Replies

5. Solaris

problem with storage error

Hi gurus I don't understand the below messages as what is going on with my storage Plz kindly suggest what could be the problem Script started on Tue 12 May 2009 09:22:13 AM GMT OMP-root-/salil> uptime 9:22am up 19:44, 2 users, load average: 0.10, 0.08, 0.08 OMP-root-/salil> uname -a... (4 Replies)
Discussion started by: girish.batra
4 Replies

6. AIX

IVM Storage Virtual disk problem

Hi, When I try to create a virtual disk in IVM ( integrated Virtual Machine VIO ) I get this message Problems occurred while processing the data. A summary of all problems for this page are listed below. Additional details for each problem may be located next to the field causing the... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Hardware

320GB HD change and recognize as 2TB Problem

Hi, I would like to ask if someone experince this problem on a Hard disc. I had a 320 GB WD Blue 3.5 Hard disc. When i plug on my PC BIOS detect it for a while and dis-appear. Luckily sometimes i can check it on a bootable CD or attach on other LINUX PC but for a while it will dis-appear. As if... (3 Replies)
Discussion started by: jao_madn
3 Replies

8. IP Networking

DNS problem : ping doesn't recognize hostname

I have vmware on my windows PC ( hostname : acer ). vmware has RHEL 7 ( hostname : rhel7 ) installed recently. RHEL IP configuration IP : 192.168.5.128 Netmask : 255.255.255.0 ssh to rhel7 works from acer using putty resolve.conf cat /etc/resolv.conf nameserver 192.168.5.1 host... (12 Replies)
Discussion started by: hiten.r.chauhan
12 Replies

LEARN ABOUT DEBIAN

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)
All times are GMT -4. The time now is 08:44 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy