Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Report Generation with Grep
Top Forums Shell Programming and Scripting Report Generation with Grep Post 302409662 by bharath.gct on Thursday 1st of April 2010 09:59:29 PM
Old 04-01-2010
Report Generation with Grep
All,

I am pretty new to Unix Environment. I am not sure if my requirement can be accomplished in Unix. I did try searching this forum and others but could not get an answer. Requirement is explained below:

I have a set of files in a folder.
Code:
file1_unload
file2_unload
file3_unload
file1_load
file2_load
file3_load
file1_dat
file2_dat
file3_dat

And each file will have similar type of input. I will just give a files output for example:
file1_unload
Code:
Started at 22:24:32
593456 records unloaded
Ended at 23:08:40

file1_load
Code:
Started at 23:09:01
Loaded records 345298
Ended at 00:12:25

You can similarly imagine values for other unload and load files. And dat files will have the data in ASCII format. Now I want a report be created which looks like the following:

Code:
file1 <file1_dat's size> 593456 22:24:32 23:08:40 00:44:08 345298 23:09:01 00:12:25 01:03:24
file2 <file2_dat's size> <Unld> <UnldSt> <UnldEd> <timeDF> <Load> <LoadSt> <LoadEd> <timeDF>
file3 <file3_dat's size> <Unld> <UnldSt> <UnldEd> <timeDF> <Load> <LoadSt> <LoadEd> <timeDF>



For better understanding, the fields in the report are:
1. Part of the filename (file1, file2 etc.), NOT the entire filename.
2. Respective dat file's size.
3. Unloaded records from the respective Unload file.
4. Start Time from the respective Unload file.
5. End Time from the respective Unload file.
6. Time Difference between 4 and 5th columns.
7. Loaded records from the respective Load file.
8. Start Time from the respective Load file.
9. End Time from the respective Load file.
10. Time Difference between 8 and 9th columns.

Let me know if this can be done in UNIX. If so, please help me do it. Let me know for any questions on the inputs.

Thanks in advance,
Bharath
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Oracle Report generation

Hi, I am beginner in shell programming.In a shell script i found a call to a script 'runrep25m',which i think is to generate oracle reports?Could anyone help me by providing some details about its usage With Thanks & Regards Dileep (7 Replies)
Discussion started by: DILEEP410
7 Replies

2. Shell Programming and Scripting

awk- report generation from input file

I have input file with below content: Person: Name: Firstname1 lastname1 Address: 111, Straat City : Hilversum Person: Name : Fistname2 lastname2 Address: 222, street Cit: Bussum Person: Name : Firstname2 lastname3 Address: 333, station straat City: Amsterdam I need... (6 Replies)
Discussion started by: McLan
6 Replies

3. UNIX for Dummies Questions & Answers

report generation

Hello, I got a requirement in writing a sheel script in unix, please help me out the requirement is there are two folders Folder1 and Folder2 and there are same files in the different folders. like file1,file2 in folder1 and file1 and file2 in folder2. I would like to compare all the... (2 Replies)
Discussion started by: gmahesh2k
2 Replies

4. Shell Programming and Scripting

Report generation

Hello, I got a requirement in writing a KSH script in unix, please help me out the requirement is there are two folders Folder1 and Folder2 and there are same files in the different folders. like file1,file2 in folder1 and file1 and file2 in folder2. I would like to compare all the similar... (3 Replies)
Discussion started by: gmahesh2k
3 Replies

5. Shell Programming and Scripting

Disk report generation problem

Hello everyone, I have a list of inputs as below. My logic is to get the particular powerdisk which matches for ASM disk which means take the major & minor number of each asm disk and matches with powerdisk info then get the particular powerdisk $ ls -l /dev/asm_* ---> ASM disk info... (11 Replies)
Discussion started by: kannan84
11 Replies

6. Shell Programming and Scripting

File Report Generation

hi all i need to generate a report file that contains the following details of files present in a directory. 1. File name 2.Complete path for each files and directory 3.File size 4.Days older example i have a directory testing that contains sub-directories and some files. i need to make a... (5 Replies)
Discussion started by: yashwantkumar
5 Replies

7. Shell Programming and Scripting

Report generation based on certain conditions

Hi I recently joined a project where I have been asked to generate a report using shell script accessing UNIX box. I have no idea on how to do it as I am a beginner and learning shell scripts. Suppose I have a XML: Code: ... (3 Replies)
Discussion started by: vat1kor
3 Replies

8. Shell Programming and Scripting

Report generation using perl script

Hi, I have a perl script to read the log file and create a report from it. I have the script file and log file in a different directories. Now i have pipe the log file data to the perl script to create the report (HMTL file). I am using the below command this isn't working tail -f... (4 Replies)
Discussion started by: vel4ever
4 Replies

9. Shell Programming and Scripting

Using awk and grep for sql generation

Hi, I have a file pk.txt which has table related data in following format TableName | PK Employee | id Contact|name,phone,country I have another file desc.txt which lists datatype of each field like this: Table|Field|Type Employee|id|int Contact|name|string Contact|country|string... (7 Replies)
Discussion started by: wahi80
7 Replies

10. UNIX for Beginners Questions & Answers

Report generation using script

Hi all I have a unix script that generates a report with the following information: uptime, mounted file systems, disk usage (> 90% --> critical, <75%-90%> --> warning, < 75% healthy), Mem usage, CPU usage and load average. But I would like to create one single report containing all this... (5 Replies)
Discussion started by: fretagi
5 Replies

LEARN ABOUT DEBIAN

sdl::gfx::imagefilter

pods::SDL::GFX::ImageFilter(3pm)			User Contributed Perl Documentation			  pods::SDL::GFX::ImageFilter(3pm)

NAME

       SDL::GFX::ImageFilter - image filtering functions

CATEGORY

       TODO, GFX

METHODS

   MMX_detect
       int gfx_image_MMX_detect()      CODE:	       SDL_imageFilterMMXdetect();

   MMX_off
       void gfx_image_MMX_off()      CODE:	     SDL_imageFilterMMXoff();

   MMX_on
       void gfx_image_MMX_on()	    CODE:	    SDL_imageFilterMMXon();

   add
       int gfx_image_add(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   mean
       int gfx_image_mean(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   sub
       int gfx_image_sub(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   abs_diff
       int gfx_image_abs_diff(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult
       int gfx_image_mult(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   mult_nor
       int gfx_image_mult_nor(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult_div_by_2
       int gfx_image_mult_div_by_2(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   mult_div_by_4
       int gfx_image_mult_div_by_4(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   bit_and
       int gfx_image_bit_and(Src1, Src2, Dest, length)	    unsigned char *Src1      unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length);	   OUTPUT:	     RETVAL

   bit_or
       int gfx_image_bit_or(Src1, Src2, Dest, length)	   unsigned char *Src1	    unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length);	  OUTPUT:	    RETVAL

   div
       int gfx_image_div(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   bit_negation
       int gfx_image_bit_negation(Src1, Dest, length)	   unsigned char *Src1	    unsigned char *Dest      int length      CODE:
		 RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length);      OUTPUT:		 RETVAL

   add_byte
       int gfx_image_add_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_uint
       int gfx_image_add_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_byte_to_half
       int gfx_image_add_byte_to_half(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       C      CODE:	      RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_byte
       int gfx_image_sub_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_uint
       int gfx_image_sub_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   shift_right
       int gfx_image_shift_right(Src1, Dest, length, N)      unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N);	    OUTPUT:	      RETVAL

   shift_right_uint
       int gfx_image_shift_right_uint(Src1, Dest, length, N)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       N      CODE:	      RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N);	  OUTPUT:	    RETVAL

   mult_by_byte
       int gfx_image_mult_by_byte(Src1, Dest, length, C)      unsigned char *Src1      unsigned char *Dest	int length	unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C);	    OUTPUT:	      RETVAL

   shift_right_and_mult_by_byte
       int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C)	 unsigned char *Src1	  unsigned char *Dest	   int length
	    unsigned char N	 unsigned char C      CODE:	      RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
	    OUTPUT:	      RETVAL

   shift_left_byte
       int gfx_image_shift_left_byte(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left_uint
       int gfx_image_shift_left_uint(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left
       int gfx_image_shift_left(Src1, Dest, length, N)	    unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N);	   OUTPUT:	     RETVAL

   binarize_using_threshold
       int gfx_image_binarize_using_threshold(Src1, Dest, length, T)	  unsigned char *Src1	   unsigned char *Dest	    int length
	    unsigned char T	 CODE:		 RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T);      OUTPUT:
		 RETVAL

   clip_to_range
       int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax)	unsigned char *Src1	 unsigned char *Dest	  int length	  unsigned
       char Tmin      unsigned char Tmax      CODE:	      RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax);	OUTPUT:
		 RETVAL

   normalize_linear
       int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax)      unsigned char *Src1	unsigned char *Dest	 int
       length	   int Cmin	 int Cmax      int Nmin      int Nmax	   CODE:	   RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
       length, Cmin, Cmax, Nmin, Nmax);      OUTPUT:	       RETVAL

   convolve_kernel_3x3_divide
       int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_divide
       int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_divide
       int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_divide
       int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_3x3_shift_right
       int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_shift_right
       int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_shift_right
       int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_shift_right
       int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   sobel_x
       int gfx_image_sobel_x(Src, Dest, rows, columns)	    unsigned char *Src	    unsigned char *Dest      int rows	   int columns	    CODE:
		 RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns);	OUTPUT: 	  RETVAL

   sobel_x_shift_right
       int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift)      unsigned char *Src      unsigned char *Dest      int rows
	    int columns      unsigned char NRightShift	    CODE:	    RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
       NRightShift);	  OUTPUT:	    RETVAL

   align_stack
       void gfx_image_align_stack()	 CODE:		 SDL_imageFilterAlignStack();

   restore_stack
       void gfx_image_restore_stack()	   CODE:	   SDL_imageFilterRestoreStack();

AUTHORS

       See "AUTHORS" in SDL.

perl v5.14.2							    2012-05-28					  pods::SDL::GFX::ImageFilter(3pm)
All times are GMT -4. The time now is 05:29 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy