luxadm -e port shows one port not connected Post: 302408191

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

getting info from microannex connected to serial port A

Hi, is there a way to get information of an annex device connected to port A ? i need to get the I.P address of the annex and the port it connected to on the annex. dori

2. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

3. Shell Programming and Scripting

To get the ip of the devices connected to a specific port.

H, I want to know the ip of the devices connected to a specific port. Suppose 2 s/m's are connected to port 3092. I want to get the ip of those system's . how do i get it?

4. UNIX for Dummies Questions & Answers

Freeing up a serial port with a modem connected

I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the...

5. Solaris

Solaris 10. fcinfo hba-port shows adapter not Found

I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install? Thanks in advance....

6. UNIX for Advanced & Expert Users

How to list process connected to tcp port?

Hey guys, I need to kill the process that is currently connected to port 10540. I'm on HP-UX machine. Below is the result of my netstat. $ netstat -an |grep 10540 tcp 0 0 129.0.0.1.10540 *.* LISTEN We don't have lsof command, but we have fuser. ...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. Solaris

SAN/Solaris: luxadm shows NOT CONNECTED

Hi, I have a question regarding HBA configuration. Here are the commands' output: # cfgadm -al | grep fc c1 fc-fabric connected unconfigured unknown c2 fc connected unconfigured unknown c5 ...

9. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT SUSE

tnm::udp

udp(n)								 Tnm Tcl Extension							    udp(n)

__________________________________________________________________________________________________________________________________________________

NAME

       udp - Send and receive UDP datagrams.
_________________________________________________________________

DESCRIPTION

       The udp command allows to send and receive datagrams using the User Datagram Protocol (UDP) (RFC 768).

UDP COMMAND

       udp open [port]
	      The  udp	open  command opens a UDP datagram socket and returns an udp handle. The socket is bound to given port number or name.	An
	      unused port number is used if the port argument is missing.

       udp connect host port
	      The udp connect command opens a UDP datagram socket and connects it to a port on a remote host. A connected UDP socket  only  allows
	      to  send messages to a single destination. This usually allows to shorten the code since there is no need to specify the destination
	      address for each udp send command on a connected UDP socket. The command returns a udp handle.

       udp send handle [host port] message
	      The udp send command sends a datagram containing message to the destination specified by host and port. The host and port  arguments
	      may  not	be  used  if the UDP handle is already connected to a transport endpoint. If the UDP handle is not connected, you must use
	      these optional arguments to specify the destination of the datagram.

       udp receive handle
	      The udp receive command receives a datagram from the UDP socket associated with handle. This command  blocks  until  a  datagram	is
	      ready to be received. In most cases, it might be a good idea to check for pending datagrams using the udp bind command.

       udp close handle
	      The udp close command closes the UDP socket associated with handle.

       udp bind handle readable [script]
       udp bind handle writable [script]
	      The  udp	bind  command allows to bind scripts to a UDP handle. A script is evaluated once the UDP handle becomes either readable or
	      writable, depending on the third argument of the udp bind command. The script currently bound to a UDP handle can  be  retrieved	by
	      calling the udp bind command without a script argument. Bindings are removed by binding an empty string.

       udp info [handle]
	      The  udp	info  command without the handle argument returns a list of all existing UDP handles. Information about the state of a UDP
	      handle can be obtained by supplying a valid UDP handle. The result is a list containing the source IP address, the source port,  the
	      destination IP address and the destination port.

SEE ALSO

       scotty(1), Tnm(n), Tcl(n)

AUTHORS

       Juergen Schoenwaelder <schoenw@cs.utwente.nl>

Tnm																	    udp(n)