OK, so I have a real dumb question, but I am desperate for an answer.
If my Sun machine shows the following out put.
Does that indicate that there is one eri interface card with two ports (eri0 and eri1), or does that mean there are 2 interfaces cards each with one port?
Please reply.
Last edited by Scott; 03-24-2010 at 05:51 PM..
Reason: Code tags
Hey all,
I got a Ultra 60 and I'm going to put a quad fast ethernet card into it, also I have a NAS with dual ethernet ports. I'm going to setup the Ultra 60 as a gateway to the NAS.
Is it possible to setup 2 ports on the quad fast ethernet card to talk to the 2 ports on the NAS? Both... (2 Replies)
I hope someone can enlighten me on this. A few weeks ago, the root file system my UnixWare 7.1.1 server became corrupt so I ended up doing a full restore of the OS from tape backup.
Since then, after I get about 270 users on the system, the message "telnetd: all network ports in use" is... (1 Reply)
HP-UX
All,
I work in a manufacturing environment where some users connect to our Progress-based system with wireless RF units (Bar-code). Sometimes they go out of range and get disconnected but their session remains alive (ghost sessions). This sometimes causes record lock problems and is a pain.... (6 Replies)
Hi Experts,
Can we use some command from unix to find the available network interface? I did tried
Its listing following, however how can I decide the which vender card is attached
e.g. if its hme , bge or some thing else
Thanks (7 Replies)
Hey,
I'm in the process of working on a script to identify IO usage on a high IO server I have setup (Debian Etch). My question is how can identify specific processes that are using much of these resources, I can identify the processes using IOTOP, but doing it remotely via script can be a pain... (1 Reply)
hi all,
have got a large log file and was wondering if there is a easy way on solaris box to grep out duplicate entries based on email address ??
sample log file :
2010-06-19,04:08:12,235632470,2010-06-18T00:00:00.000+12:00,zinny123@hotmail.com... (2 Replies)
How to create a user account on a Linux desktop machine with restrictions on connecting to the LAN, WAN, PCMCIA ports, Firewire, CDROM and generally any user controllable output options?
I have the task to set up a machine for users working with sensitive data that should not be leaving the... (1 Reply)
Hi All,
Can someone help me in finding out below information from ReHat linux,Solaris,AIX, hp-ux machine :
1. How to find total number of ports in supported by each slot.
2. name of ports that are used to transmit data to the printer
3. total number of slots on a network device (2 Replies)
morning,
i introduce the following sentence:
"sudo lsof -i | grep smtp"
ang get a list of the processes. two of them i don't know what is the function: 29574 & 29575, with the following indication: "memo" the rest of the processes shown are smtpd. i kill these two processes and they disappear,... (4 Replies)
Discussion started by: brijan007
4 Replies
LEARN ABOUT MINIX
ppmtosixel
ppmtosixel(1) General Commands Manual ppmtosixel(1)NAME
ppmtosixel - convert a portable pixmap into DEC sixel format
SYNOPSIS
ppmtosixel [-raw] [-margin] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input. Produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC
LJ250 color inkjet printer.
If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled. A printer control header and a color assignment table
begin the SIX file. Image data is written in a compressed format by default. A printer control footer ends the image file.
OPTIONS -raw If specified, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to com-
pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magni-
tude larger than a compressed file and prints much slower.
-margin
If -margin is not specified, the image will be start at the left margin (of the window, paper, or whatever). If -margin is speci-
fied, a 1.5 inch left margin will offset the image.
PRINTING
Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.
BUGS
Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was
greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the
color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.
SEE ALSO ppm(5)AUTHOR
Copyright (C) 1991 by Rick Vinci.
26 April 1991 ppmtosixel(1)