luxadm -e port shows one port not connected Post: 302405960

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

getting info from microannex connected to serial port A

Hi, is there a way to get information of an annex device connected to port A ? i need to get the I.P address of the annex and the port it connected to on the annex. dori

2. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

3. Shell Programming and Scripting

To get the ip of the devices connected to a specific port.

H, I want to know the ip of the devices connected to a specific port. Suppose 2 s/m's are connected to port 3092. I want to get the ip of those system's . how do i get it?

4. UNIX for Dummies Questions & Answers

Freeing up a serial port with a modem connected

I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the...

5. Solaris

Solaris 10. fcinfo hba-port shows adapter not Found

I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install? Thanks in advance....

6. UNIX for Advanced & Expert Users

How to list process connected to tcp port?

Hey guys, I need to kill the process that is currently connected to port 10540. I'm on HP-UX machine. Below is the result of my netstat. $ netstat -an |grep 10540 tcp 0 0 129.0.0.1.10540 *.* LISTEN We don't have lsof command, but we have fuser. ...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. Solaris

SAN/Solaris: luxadm shows NOT CONNECTED

Hi, I have a question regarding HBA configuration. Here are the commands' output: # cfgadm -al | grep fc c1 fc-fabric connected unconfigured unknown c2 fc connected unconfigured unknown c5 ...

9. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT OPENSOLARIS

cfgadm_cardbus

cfgadm_cardbus(1M)					  System Administration Commands					cfgadm_cardbus(1M)

NAME

       cfgadm_cardbus - cardbus hardware specific commands for cfgadm

SYNOPSIS

       /usr/sbin/cfgadm [-f ] [-y  | -n ] [-v]
	    [-o hardware_options] -c function ap_id [ap_id]

       /usr/sbin/cfgadm [-f ] [-y  | -n ] [-v]
	    [-o hardware_options] -x hardware_function ap_id
	    [ap_id]

       /usr/sbin/cfgadm [-v] [-s listing_options]
	    [-o hardware_options] [-l [ap_id | ap_type]]

       /usr/sbin/cfgadm [-v] [-o harware_options] -t ap_id [ap_id]

       /usr/sbin/cfgadm [-v] [-o hardware_function] -h
	    [ap_id|  ap_type]

DESCRIPTION

       The   CardBus   slots   in   Solaris   are  hot	plug  capable.	This  capability  is  supported  by  the  PCI  hardware  specific  library
       /usr/lib/cfgadm/pci.so.1 through the cfgadm command (see cfgadm(1M)).

       The hot plug administrative models between  CardBus,  PCI,  CompactPCI,	and  PCI  Express  operate  the  same  fashion.  Please  refer	to
       cfgadm_pci(1M) for the usage information.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsl			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       cfgadm(1M), config_admin(3CFGADM), libcfgadm(3LIB), attributes(5)

SunOS 5.11							   11 July 2006 						cfgadm_cardbus(1M)