Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
hello everybody,
I have a system in Solaris 8 with SDS 4.2.1
I need to mirror the system disk which has the following characteristics :
* /dev/rdsk/c0t0d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 133 sectors/track
* 27 tracks/cylinder
* 3591 sectors/cylinder... (3 Replies)
Hi all,
we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this?
In the past we have always kept slice 7 free -... (8 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system
and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
I would like to perform root disk mirroring task. Can someone please help me out on this.
Thanks !!
Regards,
Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
LEARN ABOUT ULTRIX
iostat
iostat(1) General Commands Manual iostat(1)Name
iostat - report I/O statistics
Syntax
iostat [ -c ] [ -t ] [ disknames ] [ interval ] [ count ]
Description
The command reports I/O statistics for terminals, disks and cpus. For terminals the number of input and output characters are counted.
For disks the number of 512 byte blocks per second and number of transfers per second are displayed. For cpus, it provides the percentage
of time the system has spent in user mode, in user mode running low priority (niced) processes, in system mode, and idling. On multipro-
cessor systems these cpu statistics represent a cumulative summary of all the cpus.
The optional disknames argument causes disk statistics to be displayed for the specified disks. If this argument is not specified then
disk statistics will be displayed for the first 3 disks only.
The optional interval argument causes to report once each interval seconds. The first report is for all time since a reboot and each sub-
sequent report is for the last interval only.
The optional count argument restricts the number of reports.
Options-c Displays the percentage of time each cpu spent in user mode, running low priority (nice'd) processes, in system mode, and idling.
-t Displays the number of characters read from and written to terminals.
Examples
This example will cause cpu and disk statistics for the 5 disks ra0, ra1, ra2, ra3, and ra4.
iostat ra0 ra1 ra2 ra3 ra4
This example will cause cpu, terminal, and disk statistics for ra0 to be displayed and updated every 2 seconds.
iostat -t ra0 2
FilesSee Alsovmstat(1), cpustat(1)iostat(1)
03-18-2010
