HP C3750 workstation, PA-8700+ 875 MHz 2 GB RAM Post: 302403659

Sponsored Content

UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) Linux Benchmarks HP C3750 workstation, PA-8700+ 875 MHz 2 GB RAM Post 302403659 by chatuser on Saturday 13th of March 2010 03:43:24 PM

03-13-2010

Registered User

HP C3750 workstation, PA-8700+ 875 MHz 2 GB RAM

CPU/Speed: 875 MHz
Ram: 2 GHz
Motherboard:
Bus: PCI
Cache: 2.25MB
Controller: SCSI
Disk: 2x SEAGATE ST373405LC 73 GB
Load: 1 user, idle
Kernel: 2.6.26-2-parisc
Kernel ELF?:
pgms: gcc version 4.3.2 (Debian 4.3.2-1.1)

Code:

Shell scripts (8 concurrent)  1 2 3

Dc: sqrt(2) to 99 decimal places  1 2 3 4 5 6

Recursion Test--Tower of Hanoi  1 2 3 4 5 6

==============================================================

  BYTE UNIX Benchmarks (Version 3.11)
  System -- Linux servidor 2.6.26-2-parisc #1 Thu Feb 11 01:13:16 UTC 2010 parisc GNU/Linux
  Start Benchmark Run: s�b mar 13 18:05:28 CET 2010
   2 interactive users.
Dhrystone 2 without register variables   1530570,4 lps   (10 secs, 6 samples)
Dhrystone 2 using register variables     1538291,6 lps   (10 secs, 6 samples)
Arithmetic Test (type = arithoh)         143713967,3 lps   (10 secs, 6 samples)
Arithmetic Test (type = register)         71287,4 lps   (10 secs, 6 samples)
Arithmetic Test (type = short)            74840,4 lps   (10 secs, 6 samples)
Arithmetic Test (type = int)              71340,0 lps   (10 secs, 6 samples)
Arithmetic Test (type = long)             71228,3 lps   (10 secs, 6 samples)
Arithmetic Test (type = float)           206681,7 lps   (10 secs, 6 samples)
Arithmetic Test (type = double)          155642,7 lps   (10 secs, 6 samples)
System Call Overhead Test                464177,0 lps   (10 secs, 6 samples)
Pipe Throughput Test                     312223,5 lps   (10 secs, 6 samples)
Pipe-based Context Switching Test        118678,9 lps   (10 secs, 6 samples)
Process Creation Test                       760,1 lps   (10 secs, 6 samples)
Execl Throughput Test                       223,8 lps   (9 secs, 6 samples)
File Read  (10 seconds)                  860337,0 KBps  (10 secs, 6 samples)
File Write (10 seconds)                  161363,0 KBps  (10 secs, 6 samples)
File Copy  (10 seconds)                   37089,0 KBps  (10 secs, 6 samples)
File Read  (30 seconds)                  850259,0 KBps  (30 secs, 6 samples)
File Write (30 seconds)                  159175,0 KBps  (30 secs, 6 samples)
File Copy  (30 seconds)                   36716,0 KBps  (30 secs, 6 samples)
C Compiler Test                             282,3 lpm   (60 secs, 3 samples)
Shell scripts (1 concurrent)                525,9 lpm   (60 secs, 3 samples)
Shell scripts (2 concurrent)                275,9 lpm   (60 secs, 3 samples)
Shell scripts (4 concurrent)                145,0 lpm   (60 secs, 3 samples)
Shell scripts (8 concurrent)                 72,3 lpm   (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places           8890,5 lpm   (60 secs, 6 samples)
Recursion Test--Tower of Hanoi            35890,2 lps   (10 secs, 6 samples)


                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Arithmetic Test (type = double)               2541,0   155642,7       61,3
Dhrystone 2 without register variables       22366,0  1530570,4       68,4
Execl Throughput Test                           16,0      223,8       14,0
File Copy  (30 seconds)                        179,0    36716,0      205,1
Pipe-based Context Switching Test             1318,0   118678,9       90,0
Shell scripts (8 concurrent)                     4,0       72,3       18,1
                                                                 =========
     SUM of  6 items                                                 456,9
     AVERAGE                                                          76,2

chatuser

View Public Profile for chatuser

Find all posts by chatuser

8 More Discussions You Might Find Interesting

1. Solaris

processor speed in mHZ

how do i tell the processor speed on solaris 8?

2. Solaris

440 MHz problems in UltraSparc 5 Computer

Hi all, I recently purchased a 440 MHz processor module for my Sun Ultrasparc 5 computer. I installed the module, updated the boot prom to the most recent version and when the machine starts up the initial white screen shows I have a 333 MHz processor installed ! I checked the details of the...

3. UNIX for Dummies Questions & Answers

Light *nix system for 133 mhz?

I have an old pc, about 133-200 mhz with very little memory and hard-drive. I want to install a small and fast *nix system with ion or some other simple wm for maximal performance. It's supposed to be used as a desktop. If someone could share their experience with older machines and some...

4. UNIX for Dummies Questions & Answers

Linux for Pentium @ 150 Mhz and 98Mb in RAM?

I don't know a lot of the world of Linux, but i want to start with an old machine; did someone knows if i can install Linux in a computer with a processor Pentium (not celeron) @ 133 Mhz, 98Mb in RAM (PC100) and 3Gb Hard Drive? a friend tell me about Ubuntu and openSUSE, but I don't know if...

5. Solaris

free software to test the hardware of a sun workstation specially the RAM how about f

hi can anybody give me a site that provide a free software for sun solaris workstation to test above title. i downloaded this RUMT-0.2 sofware in the net but it doesn't work after i try. thnks a lot for any help.

6. Linux

Installation of Linux in 300 MHz with 128 MB ram

Hi I am very new to Linux, but very keen to learn it. I am having a desktop of 300 MHz with 128 MB RAM and 30 GB hard drive with Windows XP. My first question is - Is there any version/flavour of Linux available that can be installed on above system especially Fedora with less compromise...

7. Red Hat

red hat Linux 5.0 is detecting 3gb ram but physical ram is 16gb

Hi, On server 64bit Hw Arch , Linux 5.0(32bit) is installed it is showing only 3gb of ram though physical is 16gb can u give me idea why?

8. Solaris

T5140 CPU Speed is 1200 Mhz or 1165 Mhz?

Hi bros, CPU speed of Sun Sparc Enterprise T5140 in data sheet is 1200 Mhz. Why it shows in "prtdiag -v" command each thread just has speed at 1165 Mhz. Thank you, tien86

LEARN ABOUT DEBIAN

sysdata

sysdata(1)						      General Commands Manual							sysdata(1)

NAME

       sysdata - find basic hardware system data

SYNOPSIS

       sysdata

DESCRIPTION

       After  the  atlc  package is built, a small benchmark is run as part of the testing procedure. This benchmark tries to get some information
       about the hardware. The program sysdata displays the same hardware information that the benchmark will display, but runs in a fraction of a
       second,	whereas  the benchmark can take from 19 s (quad 1.4 GHz Itainium 2 machine) to 14,906 s (for a very old 33.3 MHz Cray Y-MP). There
       are no options or arguments to sysdata

       The information gathered on hardware and software both developed by the same company (i.e. Solaris on Suns, AIX on  IBM	RS/6000,  IRIX	on
       SGI,  ...  etc etc) is generally more informative than the free systems (Linux, NetBSD, OpenBSD, FreeBSD) where it is usually impossible to
       get much hardware information.

EXAMPLES

       Here are some examples of the use of sysdata on a number of systems. The large number of examples is for my own use as much as anything, so
       I can keep track of the development of sysdata and see easily where it needs extending. Examples are presented for:

       1) Sun Ultra 80 running Solaris 9
       2) HP C3000 running HP-UX 11
       3) SGI Octane running IRIX 6.5.16
       4) IBM RS/6000 running AIX 5.2
       5) Dec Alpha 600a Personal Workstation running Tru64 5.1B
       6) Cray Y-MP running UNICOS 9
       7) Sun SPARCstation 20 running NetBSD 1.6
       8) Sun SPARCstation 20 running OpenBSD 3.2
       9) Sun SPARCstation 20 running Debian Linux
       10) Sun SPARCstation 20 running Solaris 2.5
       11) Generic PC with 350 MHz Pentium II running Redhat Linux 7.2

       Here's the output from sysdata on these 11 systems.

       e.g. 1 (Sun Ultra 80 running Solaris 9)
       Hardware provider:    Sun_Microsystems
       Hardware platform:    SUNW,Ultra-80
       Machine: 	     sun4u
       Sysname: 	     SunOS
       Release: 	     5.9
       Version: 	     Generic_112233-06
       Nodename:	     sparrow
       #CPUs supported:      4
       #CPUs online:	     4
       CPU type:	     sparcv9
       FPU type:	     sparcv9
       Speed:		     450 MHz
       RAM:		     4096 Mb
       L1 data cache	     unknown kB
       L1 instruction cache: unknown kB
       L2 cache:	     unknown kB

       Here's an example on a HP 9000 series Visualize C3000 workstation, fitted with one 400 MHz PA-RISC 8500 CPU and 1.5 Gb of RAM

       e.g. 2 (HP 9000 series Visualize C3000)
       Hardware provider:    HP
       Hardware platform:    unknown
       Machine: 	     9000/785
       Sysname: 	     HP-UX
       Release: 	     B.11.00
       Version: 	     A
       Nodename:	     robin
       #CPUs supported:      1
       #CPUs online:	     1
       CPU type:	     532
       FPU type:	     1048577
       Speed:		     400.0 MHz
       RAM:		     1536 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's another example this time on an SGI Octane R10000 with 2 x 195 MHz processors. Note the CPU and FPU types reported at not the R10000
       and R10010 that are reported by SGI's hinv. sysdata is not meant to replace other more sophisticated ways of obtaining  system  information
       (such as hinv on IRIX), but its data is useful to record for benchmarking purposes.

       e.g. 3 (SGI Octane R1000)
       Hardware provider:    SGI
       Hardware platform:    unknown
       Machine: 	     IP30
       Sysname: 	     IRIX64
       Release: 	     6.5
       Version: 	     04101931
       Nodename:	     owl
       #CPUs supported:      unknown
       #CPUs online:	     2
       CPU type:	     2343
       FPU type:	     2304
       Speed:		     195 MHz
       RAM:		     1024 Mb
       L1 data cache	     32 kB
       L1 instruction cache: 32 kB
       L2 cache:	     1024 kB

       Here's an example using an IBM RS/6000 F50 with 4 x 332 MHz CPUs and 1 GB of RAM.

       e.g. 4 (IBM RS/6000 F50)
       Hardware provider:    IBM
       Hardware platform:    unknown
       Machine: 	     000245984C00
       Sysname: 	     AIX
       Release: 	     2
       Version: 	     5
       Nodename:	     starling
       #CPUs supported:      unknown
       #CPUs online:	     4
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     1024 Mb
       L1 data cache	     unknown kB
       L1 instruction cache: unknown kB
       L2 cache:	     unknown kB

       And here's an example from a single 599 MHz processor Dec Alpha 600a Personal Workstation running Tru64 5.1B

       e.g. 5 (Dec Alpha 600a Personal Workstation)
       Hardware provider:    unknown
       Hardware platform:    Digital_Personal_WorkStation_600au
       Machine: 	     alpha
       Sysname: 	     OSF1
       Release: 	     V5.1
       Version: 	     2650
       Nodename:	     dobermann.localhost.ntlworld.co
       #CPUs supported:      1
       #CPUs online:	     1
       CPU type:	     EV5.6_(21164A)
       FPU type:	     unknown
       Speed:		     599 MHz
       RAM:		     1024 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's some data collected on a very old Cray Y-MP, which was introduced in 1991.

       e.g 6 (Cray Y-MP running UNICOS)

       Hardware provider:    Cray
       Hardware platform:    Y-MP
       Machine: 	     CRAY_Y-MP
       Sysname: 	     sn5176
       Release: 	     9.0.2.2
       Version: 	     sin.0
       Nodename:	     sn5176
       #CPUs supported:      unknown
       #CPUs online:	     4
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     33.3 MHz
       RAM:		     unknown Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       That  is all the examples of commercial hardware running the operating systems made by the manufacturers of the hardware. The following are
       free UNIX versions. In these cases the data gathered is never as complete. In particular the amoumt of memory reported if often	less  than
       the  real  amount due to memory taken by the operating system (kernel etc). The number of processors the system can support is never avail-
       able.

       Here's the first such non-commercial UNIX from a single processor Sun SPARCstation 20 running NetBSD 1.6.

       e.g. 7 (Sun SPARCstation 20 running NetBSD 1.6)
       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     sparc
       Sysname: 	     NetBSD
       Release: 	     1.6
       Version: 	     NetBSD_1.6_(GENERIC)_#0:_Mon_Sep__9_08:2sparc
       Nodename:	     blackbird
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     rg:/autobuild/sparc/OBJ/autobuild/src/sys/arch/sparc/compile/GENERIC
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     255 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's data from a Sun SPARCstation 20 running OpenBSD 3.2. The machine has 320 Mb of RAM, not 318 Mb as indicated. The number  of  proces-
       sors  the  system  supports  is reported as unknown, but should the system have been running Solaris 9, as in the example 1 (sparrow), then
       this information would have been determined, but it is not available under OpenBSD - or Solaris 2.5 for that matter.

       e.g. 8 (Sun SPARCstation 20 running OpenBSD 3.2)
       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     sparc
       Sysname: 	     OpenBSD
       Release: 	     3.2
       Version: 	     GENERIC#36
       Nodename:	     crow.crow.localdomain
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     319 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb
       The next machine is a Sun SPARCstation 20 running Debian Linux. The version of Debian is unknown, but clearly sysdata is unable	to  deter-
       mine this.

       e.g. 9 (Sun SPARCstation 20 running Debian Linux)

       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     sparc
       Sysname: 	     Linux
       Release: 	     2.2.20
       Version: 	     #1_Fri_Nov_16_15:48:02_EST_2001
       Nodename:	     dove
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     281 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's  data from a Sun SPARCstation 20 running Solaris 2.5 (SunOS 5.5). The machine probably does have 352 Mb of RAM as reported. The num-
       ber of processors the system supports is reported as unknown, but should the system have been running Solaris 9, as in the example 1 (spar-
       row), then this information would have been determined, but it is not available under Solaris 2.5.

       e.g. 10 (Sun SPARCstation 20 Solaris 2.5)
       Hardware provider:    Sun_Microsystems
       Hardware platform:    SUNW,SPARCstation-20
       Machine: 	     sun4m
       Sysname: 	     SunOS
       Release: 	     5.5
       Version: 	     Generic
       Nodename:	     bluetit
       #CPUs supported:      unknown
       #CPUs online:	     2
       CPU type:	     sparc
       FPU type:	     sparc
       Speed:		     125 MHz
       RAM:		     352 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's a standard PC, fitted with one processor

       e.g. 11 (350 MHz Pentium II PC running Redhat Linux)
       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     i686
       Sysname: 	     Linux
       Release: 	     2.4.18-5
       Version: 	     #1_Mon_Jun_10_15:31:48_EDT_2002
       Nodename:	     tiger
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     123 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

FILES

       sysdata does not read/write any files.

SEE ALSO

       atlc(1)
       create_bmp_for_circ_in_circ(1)
       create_bmp_for_circ_in_rect(1)
       create_bmp_for_microstrip_coupler(1)
       create_bmp_for_rect_cen_in_rect(1)
       create_bmp_for_rect_cen_in_rect_coupler(1)
       create_bmp_for_rect_in_circ(1)
       create_bmp_for_rect_in_rect(1)
       create_bmp_for_stripline_coupler(1)
       create_bmp_for_symmetrical_stripline(1)
       design_coupler(1)
       find_optimal_dimensions_for_microstrip_coupler(1)
       hinv - SGI's IRIX only.
       readbin(1)

       http://atlc.sourceforge.net		  - Home page
       http://sourceforge.net/projects/atlc	  - Download area
       atlc-X.Y.Z/docs/html-docs/index.html	  - HTML docs
       atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
       atlc-X.Y.Z/examples			  - examples

Dr. David Kirkby					     atlc-4.5.0 28th Sep 2003							sysdata(1)