03-08-2010
The driver is the Sun qlc driver, which I assume is OK as there is one port on each card already in use. Unfortunately fcinfo isn't installed, but the results from "luxadm -e port" show the following:
/devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
/devices/pci@9,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@9,600000/SUNW,qlc@1,1/fp@0,0:devctl CONNECTED
/devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
/devices/pci@9,600000/SUNW,qlc@2,1/fp@0,0:devctl CONNECTED
Thanks for your responses so far.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have worked with Qlogic (Sun) fiber cards a lot and with Emulex fiber cards only a little. Here is the scenario: I have a Sun 490 with 3 Emulex cards in it. A pair are for the 6120 array that is attached, the other is a direct attach so our SAN for Veritas Netbackup to back up the system.I... (0 Replies)
Discussion started by: lm_admin_dh
0 Replies
2. AIX
Hi all,
I have a p520 machine running 5.2ML9 with a 2Gb FC HBA from IBM, i.e.
# lscfg -vl fcs0
fcs0 U787A.001.DNZ06YM-P1-C3-T1 FC Adapter
Part Number.................80P4543
EC Level....................A
Serial Number...............1F4270A0B6
... (5 Replies)
Discussion started by: Bookie
5 Replies
3. Solaris
Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Discussion started by: xiaochensg
5 Replies
4. Solaris
Helo experts
What is an HBA? How can i know about that on any server?
Thanx in advance... (7 Replies)
Discussion started by: younus_syed
7 Replies
5. AIX
Hello:
NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies
6. Filesystems, Disks and Memory
Hope I'm in the right place. I'm in the process of zoning HBA's to my new library environment. Is there a "rule of thumb" for the number of physical tape drives that you zone to an HBA? I don't want to run the risk of overloading an HBA. Any information would be greatly appreciated. Thanks. (2 Replies)
Discussion started by: jwholey
2 Replies
7. Solaris
Hi,
I have a HBA that is currently offline for some unknown reason. The device shows up in the prtdiag -v stating it is okay. How can I bring this back online? It was working okay until recently. It is currently connected to the SAN. Details below.
# fcinfo hba-port
HBA Port WWN:... (7 Replies)
Discussion started by: sparcman
7 Replies
8. Solaris
Hello all I was configuring a SUN 2540 raid and after a reboot the hba`s is gone.
There is no longer an entry in etc/path_to_inst for them (2 cards).
I tried a reconfigure boot several times but it does not work.
The hba`s is a SUN qlogic 2200 in x4240 server (AMD).
Using solaris 10 update7.... (6 Replies)
Discussion started by: vettec3
6 Replies
9. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
10. UNIX for Beginners Questions & Answers
Can anyone offer any advice on how to modify the script below to work on a new system we have, that has no graphics capability? We admin the system through a serial RAS device. I've tried running the below script through the RAS and through an ssh -X session. It failed with something like "GTK... (3 Replies)
Discussion started by: yelirt5
3 Replies
hbaapi(3C) hbaapi(3C)
NAME
hbaapi - Fibre Channel Storage Network Industry Association Host Bus Adapter Application Programming Interface (FC SNIA HBA API)
DESCRIPTION
The Common HBA API provides a consistent HBA standard interface for accessing information in a Fibre Channel Storage Area Network (SAN)
that would be implemented across vendors as a standard 'C' API supported by vendor specific library instances.
This API library is thread-safe, but threads should not be cancelled when execution is in the API.
The following functions are available in the API for managing a Fibre Channel HBA. This API would be exposed to upper level applications
to control SAN functionality.
Please refer to for details on structures used.
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
FCP Information Functions require that the applications calling them
have an effective user id as that of the root user (euid = 0).
20.
21.
22.
SCSI Information Functions require that the applications calling them have an effective user id as that of the root user (euid = 0).
23.
24.
FILES
Contains the related data structures and definitions as in
AUTHOR
These APIs were developed by Hewlett-Packard Company.
SEE ALSO
HBA_GetVersion(3C), HBA_LoadLibrary(3C), HBA_FreeLibrary(3C), HBA_GetNumberOfAdapters(3C), HBA_GetAdapterName(3C), HBA_OpenAdapter(3C),
HBA_CloseAdapter(3C), HBA_GetAdapterAttributes(3C), HBA_GetAdapterPortAttributes(3C), HBA_GetPortStatistics(3C), HBA_GetDiscoveredPortAt-
tributes(3C), HBA_GetPortAttributesByWWN(3C), HBA_SendCTPassThru(3C), HBA_GetEventBuffer(3C), HBA_SetRNIDMgmtInfo(3C), HBA_GetRNIDMgmt-
Info(3C), HBA_SendRNID(3C), HBA_GetFcpTargetMapping(3C), HBA_GetFcpPersistentBinding(3C), HBA_SendScsiInquiry(3C), HBA_SendReportLUNs(3C),
HBA_SendReadCapacity(3C), HBA_RefreshInformation(3C), HBA_ResetStatistics(3C).
hbaapi(3C)