03-03-2010
Hi vbe. Thanks for the reply. That's a good point. In order to do a restore I'd have to connect the tape drive directly to LPAR1 so I can boot from the image on tape. That sucks, but the good news is that this is a temporary backup solution until we reach our goal of using TSM. Basically, I figured this tape drive would be the fastest temporary solution.
Once we purchase Sysback (which is very soon) we will use Sysback to send image backups to our TSM tape library. We will also have a server with Sysback installed and configured with a list of network boot clients. We'll then be able to boot off the "Sysback server" and restore the LPARs from TSM.
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get... (1 Reply)
Discussion started by: brv
1 Replies
2. UNIX for Advanced & Expert Users
anybody knows how to recover from a tape in AIX 4.3 from a IBM rs6000 170 system backup done only 97% ? (0 Replies)
Discussion started by: jupiter8
0 Replies
3. AIX
I have a standard template I deploy for each of my AIX servers. It's in a mksysb format which I pulled via the nim server after I originally set it up.
I'm trying to restore this mksysb over the wire to a remote system. The remote system is an lpar running under vio (no HMC attached). The disk... (1 Reply)
Discussion started by: scottsl
1 Replies
4. AIX
Every 3 months we have to do backups (smitth mksysb/lsmksysb + tar) on at least 30 workstations. We have to carry around 2 external tape drives to connect to them. It is a pain to do because it takes at least 3 days to do (evening/night shift) and users sometimes complain that there desk is not put... (1 Reply)
Discussion started by: Browser_ice
1 Replies
5. AIX
Hi, how can I find out though kron shell (aix 4.2) what the label of a tape is ?
Also, how can I find out if that tape has been used for an mksysb and when ? (1 Reply)
Discussion started by: Browser_ice
1 Replies
6. Solaris
Hello all,
how can i see configured fc tapes in solaris system and how can i install a new fc shared tape device , thanks
Best Regards (2 Replies)
Discussion started by: bogacd
2 Replies
7. AIX
Hello,
I am trying to install a server from a mksysb made on an other server but whit his proper image.data and bosinst.data, but after selecting boot from DLT tape and starting installation in normal mode with default setting, I get this error message :
error / warning
there is no disk... (2 Replies)
Discussion started by: astjen
2 Replies
8. AIX
had this p520 server connected to a DDS-3 4mm tape drive...
running AIX 7.1 TL01 -- the latest release.
mksysb -i -e /dev/rmt/1 ..tells me only 1% is done after over an hour ...
I had no problems with th hardware and other connections...
tar command to /dev/rmt/1 runs very fast ....... (3 Replies)
Discussion started by: ppchu99
3 Replies
9. AIX
Hi Folks,
How to restore mksysb image on LPAR which is already having cloned AIX OS installed on hdisk0 (nothing configured, only full partition image is sitting on hdisk0)
Let me know.
Thank a lot. (1 Reply)
Discussion started by: snchaudhari2
1 Replies
10. AIX
Hi,
Is it possible to use mkdvd to create a bootable DVD using a mksysb on tape as the source image?
On the system concerned, we don't have enough free space to create the mksysb to file first, so would like to use the existing tape mksysb backup.
The DVD disk/s will then be used to boot a... (4 Replies)
Discussion started by: alanp36
4 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)