How to mksysb to a tape drive connected to a different LPAR? Post: 302400506

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get...

2. UNIX for Advanced & Expert Users

AIX 4.3 mksysb tape incomplete

anybody knows how to recover from a tape in AIX 4.3 from a IBM rs6000 170 system backup done only 97% ?

3. AIX

Restoring mksysb to vio lpar?

I have a standard template I deploy for each of my AIX servers. It's in a mksysb format which I pulled via the nim server after I originally set it up. I'm trying to restore this mksysb over the wire to a remote system. The remote system is an lpar running under vio (no HMC attached). The disk...

4. AIX

savevg/tar/mksysb of server-A on remote tape drive possible ?

Every 3 months we have to do backups (smitth mksysb/lsmksysb + tar) on at least 30 workstations. We have to carry around 2 external tape drives to connect to them. It is a pain to do because it takes at least 3 days to do (evening/night shift) and users sometimes complain that there desk is not put...

5. AIX

Script: how to find out the label of a tape and if its an mksysb one ?

Hi, how can I find out though kron shell (aix 4.2) what the label of a tape is ? Also, how can I find out if that tape has been used for an mksysb and when ?

6. Solaris

Solaris 10 new fiber connected tape

Hello all, how can i see configured fc tapes in solaris system and how can i install a new fc shared tape device , thanks Best Regards

7. AIX

aix installation from mksysb tape

Hello, I am trying to install a server from a mksysb made on an other server but whit his proper image.data and bosinst.data, but after selecting boot from DLT tape and starting installation in normal mode with default setting, I get this error message : error / warning there is no disk...

8. AIX

mksysb to tape too slow...

had this p520 server connected to a DDS-3 4mm tape drive... running AIX 7.1 TL01 -- the latest release. mksysb -i -e /dev/rmt/1 ..tells me only 1% is done after over an hour ... I had no problems with th hardware and other connections... tar command to /dev/rmt/1 runs very fast .......

9. AIX

Restore mksysb image on cloned LPAR

Hi Folks, How to restore mksysb image on LPAR which is already having cloned AIX OS installed on hdisk0 (nothing configured, only full partition image is sitting on hdisk0) Let me know. Thank a lot.

10. AIX

Can I use mkdvd to create bootable DVD from mksysb on tape

Hi, Is it possible to use mkdvd to create a bootable DVD using a mksysb on tape as the source image? On the system concerned, we don't have enough free space to create the mksysb to file first, so would like to use the existing tape mksysb backup. The DVD disk/s will then be used to boot a...

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)