TTY Issue with Sunblade 150 Post: 302397273

10 More Discussions You Might Find Interesting

1. Solaris

regd.sunblade 100

hii alll i have a problem with my sunblade100. when i switch on, no display comes but if i ping from a remote machine its pinging,but iam not able to telent to that sun server,what can be the problem,how can i sort ot this issue 2 thing in usb iam not able to use STOP N (to clear the...

2. Debian

How to install Debian on a SUNBLADE 100?

I have tried to install the Debian distribution for SPARC processor, but is a pian in the neck trying to boot from cdrom or floppy. Please can somebody to help me to know the easiest way to boot and install Debian on a SUNBLADE 100 system? or wich is the best way to installed on this system, I...

3. Solaris

Can SunBlade 150 support 2 x 160GB hard disk

Hi all, I am a newbies here, Have question regards large hard disk install in SunBlade system. Can SunBlade 150 support 2 x 160GB (internal IDE) ? Want to make sure before buy the hard disks. Anyone had experiences configure large hard disk in SunBlade 150 before ? In the SunBlade 150...

4. Solaris

SunBlade 2000

Hi guys, I have a SunBlade 2000 that I am trying to configure. It has been configured previously with an IP address, hostname, DNS and so forth. I want to configure it with a new IP address. How can I achieve this? It has been one of the most difficult tasks for me as I am not really...

5. UNIX for Dummies Questions & Answers

Sunblade 1000

Hi everyone this is my first post I have used linux a couple of times and was impressed, so i bought an old sunblade 1000, just to learn something new. I cannot get the thing to work! I have tried to install solaris 10 and several types of linux. I am beginning to wonder if i was sold a...

6. Solaris

PC133 for sunblade 100

Greetings, I was in the mood of upgrading my sunblade100 in my bedroom, since I recuperated some RAM from intel servers, and found myself with what seems to not work (I was hoping to pass from 256Mb to 2GB... and then upgrading to solaris 10...) after this failure I tried with just one 512 MB,...

7. Solaris

Cloning a Sunblade 2500

Good Morning, I took a mirror drive from one Solaris 9 machine and used it to set up another. After syncing another mirror on the second machine I restarted but I don't get a login screen. I see a message:The X-server cannot be started on display :0 Also during startup I see:...

8. UNIX for Beginners Questions & Answers

Ufsrestore on SunBlade 2500

Good Afternoon, I'm setting up a SunBlade 2500 using ufsrestoreand have gotten to the point where I have restored the root and usr partitions. However, the machine keeps rebooting, never really coming up. Looking at vfstab, it looks pretty empty- shouldn't I see entries like...

9. Shell Programming and Scripting

Python: Redirecting to tty and reading from tty

In bash, you can do something like this: #!/bin/bash echo -n "What is your name? " > /dev/tty read thename < /dev/tty How can I do the same in python? I have a python script that has the following content: #!/usr/bin/python2.7 import getpass import sys import telnetlib import...

10. UNIX for Beginners Questions & Answers

SunBlade 150 can't start openwin: /usr/openwin/bin/xinit: Server error.

Hi. I have a Microsystems SunBlade 150 shell# cat /etc/release Solaris 8 2/02 s28s_u7wos_08a SPARC shell# uname -a SunOS HOSTNAME 5.8 Generic_108528-14 sun4u sparc SUNW,Sun-Blade-100 shell# prtconf -F /pci@1f,0/SUNW,m64B@13:m640 When I join to the only account the server try to...

LEARN ABOUT CENTOS

eeprom

eeprom(8)						       System Administration							 eeprom(8)

NAME

       eeprom - reads and writes 24Cxx EEPROMs connected to I2C serial bus.

SYNOPSIS

       eeprom [-d dev] [-a adr] [-p pgs] [-w] [-y] [-f file]

DESCRIPTION

       eeprom  can  be	used  for reading from / writing to i2c-eeproms like the popular 24C16, 24C08, 24C04, etc.  In contrast to eeprommer which
       supports 24C256-type eeproms (24C16s) this tool works with 1-byte addresses!

NOTE

       Don't forget to load your i2c chipset and the i2c-dev drivers.

       Pages/addresses:
	   eeproms with more than 256 bytes appear as if they
	   were several eeproms with consecutive addresses on the bus
	   so we might as well address several separate eeproms with
	   increasing addresses

PARAMETERS

       dev    device, e.g. /dev/i2c-0	 (def)

       adr    base address of eeprom, eg 0xA0 (def)

       pgs    number of pages to read, eg 8 (def)

       -w     write to eeprom (default is reading!)

       -y     suppress warning when writing (default is to warn!)

       -f file
	      copy eeprom contents to/from file (default for read is test only; for write is all zeros)

SEE ALSO

       eeprog(8) eepromer(8)

AUTHOR

       Christian Vogel <chris@hedonism.cx>

i2c-tools							     Jul 2013								 eeprom(8)