I have used a Sun Blade-150 serial console and all I connect are pins 2, 3, 1 and 7: Serial Port & Cable Pinouts SunHELP
Did you know you can use the serial port for input and the monitor for output (and vice versa)?
The output-device setting can be set to include the resolution and refresh rate of your monitor so that you see the messages during power up and before Solaris takes over, e.g.:
in this case 1024 pixels by 768 pixels at 60Hz.
I have seen folk confused by having two VGA connectors because a framebuffer card had been added in and they had the monitor plugged into the wrong one. To make the alternative framebuffer card may require amending of the pci-probe-list: 9. Multiple Monitors on a System (Solaris Handbook for Sun Frame Buffers) - Sun Microsystems
I'm fairly sure a PC USB mouse will work, it might be a bit fast or slow, a normal PC USB keyboard I think will work but will lack the power, front, back, stop, etc. keys.
On the memory front a Sun Blade-150 requires error correction SDRAM (ECC SDRAM).
hii alll
i have a problem with my sunblade100. when i switch on, no display comes but if i ping from a remote machine its pinging,but iam not able to telent to that sun server,what can be the problem,how can i sort ot this issue
2 thing in usb iam not able to use STOP N (to clear the... (3 Replies)
I have tried to install the Debian distribution for SPARC processor, but is a pian in the neck trying to boot from cdrom or floppy.
Please can somebody to help me to know the easiest way to boot and install Debian on a SUNBLADE 100 system? or wich is the best way to installed on this system, I... (2 Replies)
Hi all,
I am a newbies here,
Have question regards large hard disk install in SunBlade system.
Can SunBlade 150 support 2 x 160GB (internal IDE) ?
Want to make sure before buy the hard disks.
Anyone had experiences configure large hard disk in SunBlade 150 before ?
In the SunBlade 150... (2 Replies)
Hi guys,
I have a SunBlade 2000 that I am trying to configure. It has been configured previously with an IP address, hostname, DNS and so forth. I want to configure it with a new IP address. How can I achieve this? It has been one of the most difficult tasks for me as I am not really... (6 Replies)
Hi everyone this is my first post
I have used linux a couple of times and was impressed, so i bought an old sunblade 1000, just to learn something new.
I cannot get the thing to work! I have tried to install solaris 10 and several types of linux. I am beginning to wonder if i was sold a... (3 Replies)
Greetings,
I was in the mood of upgrading my sunblade100 in my bedroom, since I recuperated some RAM from intel servers, and found myself with what seems to not work (I was hoping to pass from 256Mb to 2GB... and then upgrading to solaris 10...)
after this failure I tried with just one 512 MB,... (2 Replies)
Good Morning,
I took a mirror drive from one Solaris 9 machine and used it to set up another. After syncing another mirror on the second machine I restarted but I don't get a login screen.
I see a message:The X-server cannot be started on display :0
Also during startup I see:... (8 Replies)
Good Afternoon,
I'm setting up a SunBlade 2500 using ufsrestoreand have gotten to the point where I have restored the root and usr partitions. However, the machine keeps rebooting, never really coming up. Looking at vfstab, it looks pretty empty- shouldn't I see entries like... (22 Replies)
In bash, you can do something like this:
#!/bin/bash
echo -n "What is your name? " > /dev/tty
read thename < /dev/tty
How can I do the same in python?
I have a python script that has the following content:
#!/usr/bin/python2.7
import getpass
import sys
import telnetlib
import... (2 Replies)
Hi.
I have a Microsystems SunBlade 150
shell# cat /etc/release
Solaris 8 2/02 s28s_u7wos_08a SPARC
shell# uname -a
SunOS HOSTNAME 5.8 Generic_108528-14 sun4u sparc SUNW,Sun-Blade-100
shell# prtconf -F
/pci@1f,0/SUNW,m64B@13:m640
When I join to the only account the server try to... (5 Replies)