Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Reading Awk lines into variables help plz
Top Forums Shell Programming and Scripting Reading Awk lines into variables help plz Post 302394104 by lavascript on Wednesday 10th of February 2010 12:30:38 PM
Old 02-10-2010
Reading Awk lines into variables help plz
I have output from luxadm display commands as below :-

Code:
DEVICE PROPERTIES for disk: /dev/rdsk/c10t60020F200000C8083F951F4C00012863d0s2
  Vendor:               SUN
  Product ID:           T300
  Revision:             0201
  Serial Num:           Unsupported
  Unformatted capacity: 242705.500 MBytes
  Write Cache:          Enabled
  Read Cache:           Enabled
    Minimum prefetch:   0x0
    Maximum prefetch:   0x0
  Device Type:          Disk device
  Path(s):

  /dev/rdsk/c10t60020F200000C8083F951F4C00012863d0s2
  /devices/scsi_vhci/ssd@g60020f200000c8083f951f4c00012863:c,raw
   Controller           /devices/sbus@2,0/SUNW,qlc@1,30000/fp@0,0
    Device Address              50020f230000c6b3,5
    Host controller port WWN    210000e08b07b2bb
    Class                       primary
    State                       ONLINE
   Controller           /devices/sbus@a,0/SUNW,qlc@1,30000/fp@0,0
    Device Address              50020f230000c808,5
    Host controller port WWN    210000e08b07ffbb
    Class                       secondary
    State                       STANDBY

I have multiple c10<mpxio holder> devices i'm stepping through in a loop.
I want to pull out the Capacity and the Device Address info from above.
I then want to split up the Device Address string via the , to get a wwn and a lun/slice number
I then want to reference a variable called the wwwn so it displays a real text string.

My script is currently this. (Its in eary phases so not checking things. I just want function atm)

Code:
#!/bin/ksh


#T3 references.
#If the t3 ref will be in a $var itself
#use the following to get the more meaningful txt
#
#e.g
#echo "$(eval print \$_$var)"

_50020f230000c808="xxxxt31"
_50020f230000c6b3="xxxxt31"
_50020f230000b3d4="xxxxt32"
_50020f230000b394="xxxxt32"

print "VxvmDisk to Mpxio Place Holder\t\t\tto T3\tSlice"

#List of Vx disks
for vxdsk in $(vxdisk list | awk '/^T/ {print $1}')
do
        #Get mpxio place holder
        mpxtag=$(vxdisk list $vxdsk |awk '/^c10/ {print $1}')

        #luxadm display /dev/rdsk/$mpxtag | awk '/capacity|Device Address/ {printf "%s ", $3}' | while read capacity devad1 devad2
        luxadm display /dev/rdsk/$mpxtag | awk '/capacity|Device Address/ {print $3}' | while read capacity devad1 devad2
        do
                #Due to dual paths to slice we only
                #only need to ref one devad
                t3slice=${devad1##*,}
                t3=${devad1%,*}

                #DBG
                echo "devad = $devad1 $devad2"
                echo "Capacity = $capacity MB"

        done

        # Print info out per lun
        print "$vxdsk = $mpxtag = $(eval print \$_$t3) slice $t3slice, Capacity $capacity"
done

The while read isn't working as the output from awk is on separate lines. I've tried a printf, but am lacking in awk knowledge to get the variables out how i need them to manipulate later.

Any ideas or is further explanation needed?
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

reading variables from a file

Hi, Could anyone help me in understanding what I am missing.. I have a text file with the following info. INFILE=> #Name Variable=<value> #--------------------------------- name1 inargs="-a Filename1.$VAR.csv -f Filename2.$VAR.csv -c File.c" name1 ... (4 Replies)
Discussion started by: ttshell
4 Replies

2. Shell Programming and Scripting

awk script - reading input lines

Can I do something like, if($0==/^int.*$/) { print "Declaration" } for an input like: int a=5; If the syntax is right, it is not working for me, but I am not sure about the syntax. Please help. Thanks, Prasanna (1 Reply)
Discussion started by: prasanna1157
1 Replies

3. Shell Programming and Scripting

Help with reading and assigning variables

Hi Gurus, I have a file named log with 2 lines Each line is a file name. eg $ cat log monday tuesday I need to read log and assign each output(filename) to a different variable. The following doesn't work:- while read A B do echo " a is ${A} " echo " b is ${B} " done <... (6 Replies)
Discussion started by: wisdom
6 Replies

4. Shell Programming and Scripting

Reading variables from a file

Hi, I have an issue that hope someone will be able to help me with.... I'm using a while-read loop to read lines from a file that contain variables, and I want the variables substituted, but I can't get it to work - the below example with explain: while read line do echo $line ... (5 Replies)
Discussion started by: AndyG
5 Replies

5. Shell Programming and Scripting

Reading two lines in a while loop and combining the lines

Dear all, I have a file like this: imput scaffold_0 1 scaffold_0 10000 scaffold_0 20000 scaffold_0 25000 scaffold_1 1 scaffold_1 10000 scaffold_1 20000 scaffold_1 23283 and I want the output like this: scaffold_0 1 scaffold_0 10000 scaffold_0 10000 scaffold_0 20000... (6 Replies)
Discussion started by: valente
6 Replies

6. Shell Programming and Scripting

awk: Print fields between two delimiters on separate lines and send to variables

I have email headers that look like the following. In the end I would like to accomplish sending each email address to its own variable, such as: user1@domain.com='user1@domain.com' user2@domain.com='user2@domain.com' user3@domain.com='user3@domain.com' etc... I know the sed to get rid of... (11 Replies)
Discussion started by: tay9000
11 Replies

7. Shell Programming and Scripting

Error reading two input variables

Hello all, I've been out of programming for awhile so sorry about the stupid, elementary question. I'm trying to read two inputs and compare them to a list entered as a parameter via the terminal. The script is #!/bin/bash read -p "Enter the numbers" NUM1 NUM2 for VALUE in $@; do ... (6 Replies)
Discussion started by: EnduranceMan
6 Replies

8. Shell Programming and Scripting

Reading control characters into variables

Hi, I am trying to write a shell script to help with some digital signature work currently being undertaken where we have a file that contains a number of rows ending with ^M. What I need to do is concatenate this using shell scripting and retain the control character. E.G. abc^M... (5 Replies)
Discussion started by: chris01010
5 Replies

9. Shell Programming and Scripting

Reading multiple values from multiple lines and columns and setting them to unique variables.

Hello, I would like to ask for help with csh script. An example of an input in .txt file is below, the number of lines varies from file to file and I have 2 or 3 columns with values. I would like to read all the values (probably one by one) and set them to independent unique variables that... (7 Replies)
Discussion started by: FMMOLA
7 Replies

10. Shell Programming and Scripting

Find between lines start and end: awk with bash variables

I have a file as follows: 0 1056 85540 414329 774485 1208487 1657519 2102753 2561259 3037737 3458144 3993019 4417959 4809964 5261890 5798778 6254146 I want to find all lines between a specified start and end tag. (6 Replies)
Discussion started by: jamie_123
6 Replies

LEARN ABOUT REDHAT

disks

disks(1M)						  System Administration Commands						 disks(1M)

NAME

       disks - creates /dev entries for hard disks attached to the system

SYNOPSIS

       /usr/sbin/disks [-C] [-r rootdir]

DESCRIPTION

       devfsadm(1M) is now the preferred command for /dev and should be used instead of disks.

       disks  creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices
       directory tree. It performs the following steps:

       1.  disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices
	   on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name.

       2.  The	/dev/dsk  and  /dev/rdsk  directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or
	   cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this  program	to
	   designate  a  particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned
	   number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the  target  number
	   for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number
	   on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only)

       3.  If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks  creates
	   the	missing  symbolic  links.  If  none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries
	   exist for other disks attached to the same controller, and if so, creates new entries using the same  controller  number  as  used  for
	   other  disks  on  the  same	controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con-
	   troller as the current disk, disks assigns the lowest-unused controller number and creates entries  for  the  disk  slices  using  this
	   newly-assigned controller number.

       disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually,
       first run drvconfig(1M) to ensure /devices is consistent with the current device configuration.

   Notice to Driver Writers
       disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to  be  disk
       devices. disks(1M) requires the minor name of disk devices obey the following format conventions.

       The  minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter-
       faces consists of a single lowercase ASCII character,  a through u, followed by ,raw.

       disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8
       slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire
       disk, while r, s, t, and  u represent up to 4 additional partitions.

       To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type	and  refrain  from
       using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F).

OPTIONS

       The following options are supported:

       -C	       Causes  disks  to  remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links
		       which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible.

       -r rootdir      Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found  under  rootdir,  not  directly
		       under /.

ERRORS

       If  disks  finds  entries of a particular logical controller linked to different physical controllers, it prints an error message and exits
       without making any changes to the /dev directory, since it cannot determine which of the two alternative  logical-to-physical  mappings	is
       correct.  The links should be manually corrected or removed before another reconfiguration-boot is performed.

EXAMPLES

       Example 1: Creating Block and Character Minor Devices

       The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function.

       #include    <sys/dkio.h>
       /*
	* Create the minor number by combining the instance number
	* with the slice number.
	*/
       #define MINOR_NUM(i, s)	 ((i) << 4 | (s))

       int
       xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
       {
	   int instance, slice;
	   char name[8];

	       /* other stuff in attach... */

	   instance = ddi_get_instance(dip);
	   for (slice = 0; slice < V_NUMPAR; slice++) {
	       /*
		* create block device interface
		*/
	       sprintf(name, "%c", slice + 'a');
	       ddi_create_minor_node(dip, name, S_IFBLK,
		   MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0);

	       /*
		* create the raw (character) device interface
		*/
	       sprintf(name,"%c,raw", slice + 'a');
	       ddi_create_minor_node(dip, name, S_IFCHR,
		   MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0);
	   }
       }

       Installing the  xkdisk disk driver on a Sun Fire 4800, with the	driver controlling a  SCSI disk (target 3 attached to an isp(7D) SCSI HBA)
       and performing a reconfiguration-boot (causing disks to be run) creates the following special files in  /devices.

       # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/
       brw-r-----   1 root sys	 32, 16 Aug 29 00:02 xkdisk@3,0:a
       crw-r-----   1 root sys	 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw
       brw-r-----   1 root sys	 32, 17 Aug 29 00:02 xkdisk@3,0:b
       crw-r-----   1 root sys	 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw
       brw-r-----   1 root sys	 32, 18 Aug 29 00:02 xkdisk@3,0:c
       crw-r-----   1 root sys	 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw
       brw-r-----   1 root sys	 32, 19 Aug 29 00:02 xkdisk@3,0:d
       crw-r-----   1 root sys	 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw
       brw-r-----   1 root sys	 32, 20 Aug 29 00:02 xkdisk@3,0:e
       crw-r-----   1 root sys	 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw
       brw-r-----   1 root sys	 32, 21 Aug 29 00:02 xkdisk@3,0:f
       crw-r-----   1 root sys	 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw
       brw-r-----   1 root sys	 32, 22 Aug 29 00:02 xkdisk@3,0:g
       crw-r-----   1 root sys	 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw
       brw-r-----   1 root sys	 32, 23 Aug 29 00:02 xkdisk@3,0:h
       crw-r-----   1 root sys	 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw

       /dev/dsk will contain the disk entries to the block device nodes in /devices

       # ls -l /dev/dsk
       /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a
       /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b
       /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c
       /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d
       /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e
       /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f
       /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g
       /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h

       and /dev/rdsk will contain the disk entries for the character device nodes in /devices

       # ls -l /dev/rdsk
       /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw
       /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw
       /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw
       /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw
       /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw
       /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw
       /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw
       /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw

FILES

       /dev/dsk/*      Disk entries (block device interface)

       /dev/rdsk/*     Disk entries (character device interface)

       /devices/*      Device special files (minor device nodes)

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F)

       Writing Device Drivers

BUGS

       disks silently ignores malformed minor device names.

SunOS 5.10							    7 Nov 2002								 disks(1M)
All times are GMT -4. The time now is 06:39 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy