You are assigning a static ip that is in your dynamic range of ip's.
This is why another machine is getting this ip. The range option is for the dynmaic ip pool that can be randomly assinged to machines that don't have static rules. If you change the fixed-address option to something outside this range it should work fine. Also you have only one ip in your range option so only one machine can get a dynamic ip.
Quote:
Originally Posted by Gopi Krishna P
Hi ,
when i configure my server with a fixed ip address in dhcpd.conf as below
when i start dhcpd server , it is assigning the ip address to some other node in the network.
is it a expected behavior ?
if so , some on please tell me how to assign fixed ip address to a client from dhcp server such that it wont assign to other clients the same ip address.
i very much need it .
I have a new solaris machine and I am trying to bring the same on network. The IP assignemnt is via DHCP. I want to know as which files need to be modified to include DHCP server IP in order that the machine gets its IP via DHCP server.
Thanks in Advance. :) (1 Reply)
hi
I need a dhcp congfigured to give some of my clients IP regarding their MAC addresses and rest should get any IP from same pool. I am not sure what to add dhcpd.conf to provide such a pool or group or class. I tried with this but seems not good enough.
<<<<dhcpd.conf>>>>
... (2 Replies)
Hi to all.
Sorry for my bad english.
For pure self-educational, not professional, purposes, I am studying how to configure a server with several services operating on it.
For my experiment I'm using VirtualBox 3.1.4 on a WinXP host with 3 FreeBSD guests; one acts as a DHCP + DNS server; the... (0 Replies)
we can assign a dynamic and fixed ip address for a dhcp_client through dhcp server ,
if it is dynamic ip address , it would be having lease time and renews after half of the leasetime gets over.
would the same funda applies for fixed ip address to .. i dont think so ... please confirm on the... (3 Replies)
Hi,
We currently operate a DHCP Server on Vxworks system.
It seems that the server is functioning only over the boot interface.
While trying to use it on a different interface the DHCP client messages seems to reach the interface but stay without response.
From a... (1 Reply)
Where can you find your DHCP Server address? I checked all of the files that this mentioned with no luck.
Quick HOWTO : Ch08 : Configuring the DHCP Server - Linux Home Networking (6 Replies)
Hello Friends,
I am looking for the configuration steps to enable option 90 on Linux DHCP server.Also i need to add secret id to be configured for option 90.
can someone help me in providing the steps with parameter values .
Thanks in advance,
Veera (0 Replies)
Discussion started by: veera_s99
0 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO vconfig(8)interfaces(5)vlan September 30 2007 VLAN-INTERFACES(5)