i did a ufsdump/restore from a mirrored system and i'm not able to get the new system to boot off of the dump.
system 1 is a v245 mirrored with disk suite. metadb's are in place
i placed my a clean drive into slot 3 and did the following.
removed the drive from slot 3 and placed it into system 2 (v245 as well) and at the ok prompt typed boot or boot disk, but the system won't boot.
Last edited by Scott; 02-08-2010 at 05:24 PM..
Reason: Please use code tags
Hi there,
I have a problem at the moment trying to restore a directory from a Super DLT tape with about 3 weeks worth of backups on it. I need to be able to get the last backup performed on this tape but using ufsrestore -i it only restores the first backup which is no good to me. There is... (4 Replies)
on sparc solaris 2.8 hosts, HOSTB, after changing to /dir1 need to:
connect to tape drive on HostA. change directory to /dir0/dir1 on tape and
restore everything under that path to /dir1 directory.
could i get help?. (1 Reply)
I just installed solaris 9 on a sunblade 150(sparc), and have it partitioned. I've been using ufsrestore to restore bring the config from my old system, to the sunblade. I'm not having any luck. The root directory restore seems to work. When I try to restore /usr, I get an "/usr/sbin/fsck not... (4 Replies)
I'm trying to restore a server from a backup tape. I've partitioned my drive, and I've run into a problem; After extracting everything from the tape, It seems as if only the directory structure is intact. Here are my steps:
1. booted from cdrom to single user mode boot cdrom -s
2. used... (3 Replies)
HI Gurus,
I have a sunfire V445 server running SAP ECC 6.0 with an Oracle database on Solaris 9 (SunOS 5.9). I recently completed a ufsdump to tape of the following files:-
/,
/usr,
/oracle,
/export,
/sapr3,
I want to restore these files from tape onto a different server of the same... (5 Replies)
Hi , I accidentally deleted crontab entries and I need to restore back urgently ! we use a ufsdump with 0cfu option. I like to know how to restrore / retrieve to different location for crontab file only from the backup. Thanks. (4 Replies)
hi, on my sol9 box i create my backup using the below command:
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u1
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u2
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u3
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u4
now on the new sol10 box, to restore i use this commands:
cd /u1... (3 Replies)
Good Afternoon,
I'm going to attempt a ufsrestore of a Solaris 9 machine from a connected NAS containing the ufsdumps. The idea is to be able to take ufsdumps of a failed machine (machine 1), and use them to set up a backup machine (machine 2). (I'm testing for disaster recovery)
Note... (52 Replies)
Good Morning,
I'm running through a Solaris 9 ufsrestore process on a Sunblade 2500 that folks here helped me write a year ago. Here: https://www.unix.com/303011447-post11.html
Hicksd8 tells me to # rm restoresymtable. I see this file in the other slices as well. Do I remove it from... (8 Replies)
Discussion started by: Stellaman1977
8 Replies
LEARN ABOUT FREEBSD
boot.config
BOOT.CONFIG(5) BSD File Formats Manual BOOT.CONFIG(5)NAME
boot.config -- Configuration file for the boot blocks
DESCRIPTION
The boot.config file contains options for the FreeBSD boot block code.
When the FreeBSD boot loader runs, it searches the ``a'' slice of the boot partition for a boot.config file (as a result, slices which are
missing an ``a'' partition require user intervention during the boot process). If the boot.config file is found, its contents are used as
the default configuration options for the boot block code and are echoed to the system console.
A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other
valid boot(8) option on a single line, as it is done at the ``boot:'' prompt.
The options related to the boot image selection described below and all the other options available for boot.config are documented in detail
in the boot(8) manual page.
FILES
/boot.config parameters for the boot blocks (optional)
EXAMPLES
The command:
# echo "-P" > /boot.config
will activate the serial console of FreeBSD.
The command:
# echo "1:ad(1,a)/boot/loader" > /boot.config
will instruct the second stage of boot(8) on the first disk to boot with the third boot(8) stage from the second disk.
The command:
# echo "1:ad(1,a)/boot/loader -P" > /boot.config
will do both of the above.
SEE ALSO boot(8), loader(8)AUTHORS
This manual page was written by Daniel Gerzo <danger@FreeBSD.org>.
BSD May 13, 2007 BSD