02-04-2010
Booting problem due to adding hard drive incorrectly
I have tried to (unsuccessfully) add an old drive to get drivers (for the 3Com network card) onto a Sco Openserver 5.1 server. Now it wont boot:
I used Sco Admin to do this.
It have 3 scuzzi drives
I added an IDE
I think what I did wrong was add the IDE to existing space, and I should not have
I am planning on resolving but would really appreciate some experienced input before I do this:
1. Boot using Linux boot CD
2. Mount partitions
3. Edit files pertaining to the mountable volumes to correct/revert
Dont know if anyone has a better solution or the answers.
The boot messages:
Gets to H iinit
"PANIC: srmountfun - Error 22 mounting rootdev hd (1/42)
Cannot dump 65375 pages to dumpdev hd (1/41): Space for only 0 pages
** Safe to Power Off **
-or-
** Press any key to Reboot"
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
2. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
3. SCO
I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone... (1 Reply)
Discussion started by: garycrow
1 Replies
4. Solaris
Need to replace hard drive on Ultra 10 running Solaris 2.6.
Bought new drive about the same size.
Partitioned it differently to solve a space problem.
After newfs used tar commands to copy most of the files to the new drive.
Installboot took care of the boot file.
ufsdump copied /dev and... (3 Replies)
Discussion started by: snorkack59
3 Replies
5. Filesystems, Disks and Memory
Hello
I am having a problem with being able to use my 2nd hard drive as my new os doesn't recognize it. it is /dev/hdb2 and it shows as It is still in my system. it is a 73 gb hard drive and it is useless to me now. I used to have windows XP and had no problem with it,I have since changed to... (2 Replies)
Discussion started by: Donald Spauldin
2 Replies
6. UNIX for Dummies Questions & Answers
Hello
I have a new project being kicked off next month and i should learn UNIX fast. I have never used UNIX before so i have the following questions:
1) Is any UNIX free to install?
2) Can i install and boot UNIX from an External Hard Drive (The system board on my laptop crashed so i took the... (2 Replies)
Discussion started by: pipsonian
2 Replies
7. Hardware
As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1.
I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
8. UNIX for Dummies Questions & Answers
Hello,
I have a problem with the hard drive connected to my setup. When I connect the HDD which is damaged, and try to bring up my system, I get some error messages continuously on my console saying
ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 frozen
ata2.01: failed command:... (4 Replies)
Discussion started by: sai2krishna
4 Replies
9. UNIX for Beginners Questions & Answers
Hello all,
I am EXTREMELY new to using bash and I have a bit of a problem: I'm trying to set up a shell script that can
1.) take one of several giant files off of an external hard drive
2.) use it as input for scripts on my laptop's hard drive
... (3 Replies)
Discussion started by: machine_spirit
3 Replies
LEARN ABOUT FREEBSD
mlxcontrol
MLXCONTROL(8) BSD System Manager's Manual MLXCONTROL(8)
NAME
mlxcontrol -- Mylex DAC-family RAID management utility
SYNOPSIS
mlxcontrol <command> [args]
mlxcontrol status [-qv] [drive]
mlxcontrol rescan controller [controller ...]
mlxcontrol detach drive [drive ...]
mlxcontrol detach -a
mlxcontrol check drive
mlxcontrol config controller
mlxcontrol help command
DESCRIPTION
The mlxcontrol utility provides status monitoring and management functions for devices attached to the mlx(4) driver.
Controller names are of the form "mlxN" where N is the unit number of the controller. Drive names are of the form "mlxdN" where N is the
unit number of the drive. Do not specify the path to a device node.
status Print the status of controllers and system drives. If one or more drives are specified, only print information about these drives,
otherwise print information about all controllers and drives in the system. With the -v flag, display much more verbose informa-
tion. With the -q flag, do not print any output. This command returns 0 if all drives tested are online, 1 if one or more drives
are critical and 2 if one or more are offline.
rescan Rescan one or more controllers for non-attached system drives (e.g. drives that have been detached or created subsequent to driver
initialisation). If the -a flag is supplied, rescan all controllers in the system.
detach Detach one or more system drives. Drives must be unmounted and not opened by any other utility for this command to succeed. If the
-a flag is supplied, detach all system drives from the nominated controller.
check Initiate a consistency check and repair pass on a redundant system drive (e.g. RAID1 or RAID5). The controller will scan the system
drive and repair any inconsistencies. This command returns immediately; use the status command to monitor the progress of the
check.
rebuild Requires two arguments, controller and physdrive as specified in the output of the status command. All system drives using space on
the physical drive physdrive are rebuilt, reconstructing all data on the drive. Note that each controller can only perform one
rebuild at a time. This command returns immediately; use the status command to monitor the progress of the rebuild.
config Print the current configuration from the nominated controller. This command will be updated to allow addition/deletion of system
drives from a configuration in a future release.
help Print usage information for command.
AUTHORS
The mlxcontrol utility was written by Michael Smith <msmith@FreeBSD.org>.
BUGS
The config command does not yet support modifying system drive configuration.
Error log extraction is not yet supported.
BSD
April 10, 2000 BSD