Hello, I've got a FreeBSD 6 server running on my network that I used as a file server for my main computer. However I've really become frustrated with the slow up/down speeds I'm getting, about 100KB/s, which is about as bad as if I was using a "real" server. My setup is as follows:
Code:
ISP
|
Router
|
Hub
|
PowerLine node
[~10m]
PowerLine node
|
FreeBSD 6 Sever (256MB/450MHz Pentium)
[~3M]
Powerline node
|
Main Computer (Win7 using FileZilla)
Here are the results of tracert:
Code:
Tracing route to 192.168.1.15 over a maximum of 30 hops
1 319 ms 266 ms 242 ms 192.168.1.15
Trace complete.
It seems to be since we're just going over the LAN, I should really be getting at least 500KB/s+ right? Is this a PowerLine issue, cable issue, FreeBSD issue, PC hardware isssue... etc? I'd be very thankful if I can get some ideas where to start to identify the bottleneck here, thanks a lot.
On one of of solaris 7 boxes whenever i telnet or ftp it takes sometime before i get the prompt...any quick ideas where I should look...Thanks (3 Replies)
One of our most frequent questions is how to automate ftp transfers. There are several approaches. Since I'm writing this post, we will start with my favorite technique. :)
In Automated FTP task I present a simple example of my ksh co-process technique. And note that later in this thread I... (0 Replies)
just as the title says.
thanks.
#General Rule Sets
/sbin/ipfw add 0300 check-state
/sbin/ipfw add 0301 deny tcp from any to any in established
/sbin/ipfw add 0302 pass tcp from any to any out setup keep-state
/sbin/ipfw add 0303 pass udp from any to any out
#SSH FTP
/sbin/ipfw add 0400... (11 Replies)
When I ssh to my box, an Ultra 5. I get prompted for password immediately. I enter it and have to wait sometimes a full minute for it to prompt for a password.
The same thing happens when i try to ftp to the box, it will say connected, but it takes forever to prompt for password, and... (2 Replies)
SCO Unix 5.0.5 moving to Red Hat
Intel EtherExpress Pro/100+
Newbie that just started working for a company and having an issue with transfer speeds over the network. Need to move 1.5GB of data from an old server with a single SCSI HDD to a new server with RAID 5 SATA HDD's. Goal was to FTP... (4 Replies)
Hi again guys,
Earlier today, just all of a sudden, all SSH and FTP connections to my internal Linux box just slowed down to a crawl. After the connection/authentication though, everything was back to normal speed. Until you have to connect again. A box reboot didnt work either.
Now, from... (1 Reply)
How can one find the name and size of files ftp'ed during an old ftp transfer.
Is there any log where these details are stored or any UNIX command which can provide these details.
Thanks in advance. (4 Replies)
Hi All.
We are using AIX 5.3 ML9. There is 1 Gig NIC installed on two servers (Primary and Secondary) with Full Duplex Mode. We have scheduled a cronjob to copy the backup from primary to secondary thru FTP on WAN. The total data size is 15 GB and it took 9 Hours and 18 Mins with transfer rate... (6 Replies)
hi,
good morning.
Ma trying to ftp from one AIX machine to another on the same segment of the network. The ftp to eshtablish connection from machine A to machine B is quick, but the reverse is taking is much time (2 mins).
anyone can help me to solve this issue please (1 Reply)
Hello all. I have VSFTP up and ruining on ubuntu 10.04. It works great inside LAN, however when it comes to using it outside i have some problems. If i try to connect from filezila i get the listing and if i try to download it shows it will take forever to receive a file which is larger then 1mb,... (2 Replies)
Discussion started by: mantas1
2 Replies
LEARN ABOUT OSX
findsmb
FINDSMB(1)FINDSMB(1)NAME
findsmb - list info about machines that respond to SMB name queries on a subnet
SYNOPSIS
findsmb [subnetbroadcastaddress]
DESCRIPTION
This perl script is part of the samba(7) suite.
findsmb is a perl script that prints out several pieces of information about machines on a subnet that respond to SMB name query requests.
It uses nmblookup(1) and smbclient(1) to obtain this information.
OPTIONS -r
Controls whether findsmb takes bugs in Windows95 into account when trying to find a Netbios name registered of the remote machine. This
option is disabled by default because it is specific to Windows 95 and Windows 95 machines only. If set, nmblookup(1) will be called
with -B option.
subnet broadcast address
Without this option, findsmb will probe the subnet of the machine where findsmb(1) is run. This value is passed to nmblookup(1) as part
of the -B option.
EXAMPLES
The output of findsmb lists the following information for all machines that respond to the initial nmblookup for any name: IP address, Net-
BIOS name, Workgroup name, operating system, and SMB server version.
There will be a '+' in front of the workgroup name for machines that are local master browsers for that workgroup. There will be an '*' in
front of the workgroup name for machines that are the domain master browser for that workgroup. Machines that are running Windows for Work-
groups, Windows 95 or Windows 98 will not show any information about the operating system or server version.
The command with -r option must be run on a system without nmbd(8) running. If nmbd is running on the system, you will only get the IP
address and the DNS name of the machine. To get proper responses from Windows 95 and Windows 98 machines, the command must be run as root
and with -r option on a machine without nmbd running.
For example, running findsmb without -r option set would yield output similar to the following
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
---------------------------------------------------------------------
192.168.35.10 MINESET-TEST1 [DMVENGR]
192.168.35.55 LINUXBOX *[MYGROUP] [Unix] [Samba 2.0.6]
192.168.35.56 HERBNT2 [HERB-NT]
192.168.35.63 GANDALF [MVENGR] [Unix] [Samba 2.0.5a for IRIX]
192.168.35.65 SAUNA [WORKGROUP] [Unix] [Samba 1.9.18p10]
192.168.35.71 FROGSTAR [ENGR] [Unix] [Samba 2.0.0 for IRIX]
192.168.35.78 HERBDHCP1 +[HERB]
192.168.35.88 SCNT2 +[MVENGR] [Windows NT 4.0] [NT LAN Manager 4.0]
192.168.35.93 FROGSTAR-PC [MVENGR] [Windows 5.0] [Windows 2000 LAN Manager]
192.168.35.97 HERBNT1 *[HERB-NT] [Windows NT 4.0] [NT LAN Manager 4.0]
VERSION
This man page is correct for version 3.0 of the Samba suite.
SEE ALSO nmbd(8), smbclient(1), and nmblookup(1)AUTHOR
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open
Source project similar to the way the Linux kernel is developed.
The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open
Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to
DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.
FINDSMB(1)
01-28-2010
