Undo the Veritas mirroring and update from Solaris 8 to Solaris 10
Hi all
I wish to undo the mirroring for root and update the Solaris version from 8 to 10. Since i am lack of knowledge and experience on this, hope you all can help me double check the step and correct me.
Existing disk groups details
If i wish to undo this mirroring, is it the below step correct? Kindly advise
Last edited by SmartAntz; 01-27-2010 at 05:26 AM..
Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
I am having an issue with setting up disk mirroring for Solaris 10 on an x86 server. My main problem is that the volumes and slices have already been setup and our proprietary software has already been installed and configured. The entire drive has been allocated in this configuration and the... (2 Replies)
Has anyone managed to set up disk mirroring in Solaris 10 yet? If so can you point me in the direction of some useful documentation please.
Cheers (25 Replies)
Hi Friends,
I am having Sun Solaris 5.8 OS installed having 2 different size hard disk, sizes are c0t0d0s0(160 GB) and c0t2d0s0 (40GB). I have installed Sun Solaris 5.8 OS in c0t0d0s0 (160GB) harddisk.
I have configured all the parameters required for disk mirroring. But when executing... (4 Replies)
Hi,
I'm trying to setup mirroring, but i get an error.
what have done is.
prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
Then i created the metadb.
metadb -a -f c1t0d0s7 c1t1d0s7
now i wan't to metainit.
metainit -f d11 1 1 c1t0d0s0
metainit -f d12 1 1... (4 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hi Guys,
I have an issue with my Hotspares/Metastat on an x4270m2.
I have no hotspares available, when i printed out my metastat i got
d21: Concat/Stripe
Size: 33559785 blocks (16 GB)
Stripe 0:
Device Start Block Dbase Reloc
... (0 Replies)
I would like to perform root disk mirroring task. Can someone please help me out on this.
Thanks !!
Regards,
Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
LEARN ABOUT HPUX
vximportdg
vximportdg(1M)vximportdg(1M)NAME
vximportdg - import a disk group into the Veritas Volume Manager configuration
SYNOPSIS
vximportdg daname new_dgname
DESCRIPTION
The vximportdg utility performs a temporary import of the disk group contained on the disk device specified by daname to the disk group
specified by new_dgname. As the persistent disk group information is not changed within the private partition of the affected disk, the
import is only valid for the duration of the bootload or until a vxdg deport is performed.
ARGUMENTS
daname Specifies the device name (disk access name) of one of the member disks of the disk group to be imported. The other members are
imported automatically.
new_dgname
Specifies the disk group to be imported.
USAGE
One reason to use the vximportdg utility is to import a second generation of the rootdg disk group so that its objects are available for
use while a system is running on a different rootdg. To prevent volumes on the second generation rootdg from having the same device minor
numbers as volumes (such as rootvol) on the active rootdg, the importation assigns temporary non-conflicting device minor numbers. If this
occurs, vximportdg outputs warning messages detailing the mapping of the minor numbers.
SEE ALSO vxdg(1M)VxVM 5.0.31.1 24 Mar 2008 vximportdg(1M)