Undo the Veritas mirroring and update from Solaris 8 to Solaris 10
Hi all
I wish to undo the mirroring for root and update the Solaris version from 8 to 10. Since i am lack of knowledge and experience on this, hope you all can help me double check the step and correct me.
Existing disk groups details
If i wish to undo this mirroring, is it the below step correct? Kindly advise
Last edited by SmartAntz; 01-27-2010 at 05:26 AM..
Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
I am having an issue with setting up disk mirroring for Solaris 10 on an x86 server. My main problem is that the volumes and slices have already been setup and our proprietary software has already been installed and configured. The entire drive has been allocated in this configuration and the... (2 Replies)
Has anyone managed to set up disk mirroring in Solaris 10 yet? If so can you point me in the direction of some useful documentation please.
Cheers (25 Replies)
Hi Friends,
I am having Sun Solaris 5.8 OS installed having 2 different size hard disk, sizes are c0t0d0s0(160 GB) and c0t2d0s0 (40GB). I have installed Sun Solaris 5.8 OS in c0t0d0s0 (160GB) harddisk.
I have configured all the parameters required for disk mirroring. But when executing... (4 Replies)
Hi,
I'm trying to setup mirroring, but i get an error.
what have done is.
prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
Then i created the metadb.
metadb -a -f c1t0d0s7 c1t1d0s7
now i wan't to metainit.
metainit -f d11 1 1 c1t0d0s0
metainit -f d12 1 1... (4 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hi Guys,
I have an issue with my Hotspares/Metastat on an x4270m2.
I have no hotspares available, when i printed out my metastat i got
d21: Concat/Stripe
Size: 33559785 blocks (16 GB)
Stripe 0:
Device Start Block Dbase Reloc
... (0 Replies)
I would like to perform root disk mirroring task. Can someone please help me out on this.
Thanks !!
Regards,
Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
LEARN ABOUT HPUX
vxinstall
vxinstall(1M)vxinstall(1M)NAME
vxinstall - menu-driven Veritas Volume Manager initial configuration procedure
SYNOPSIS
vxinstall
DESCRIPTION
The vxinstall utility provides a menu driven interface to configure Veritas Volume Manager (VxVM). If you install the Veritas Volume Man-
ager software package using the operating system's package administration commands, you can run vxinstall to configure VxVM for initial use
on your system.
Note: If you use the Veritas software installation scripts, do not run this utility.
OPERATIONS
Licensing
vxinstall first asks if you want to view the Veritas licenses already installed on the system. Answering "yes" is equivalent to exe-
cuting the vxlicrep command (see vxlicrep(1)).
You are then asked if you want to add licenses for other Veritas products. Answering "yes" is equivalent to running the vxlicinst
command (see vxlicinst(1)). and entering a license key.
Enclosure-Based Naming
You can choose whether you want to use disk access names that are based on the device names assigned by the operating system, or that
are based on names that you assign to enclosures.
System-Wide Default Disk Group
You can enter the name for the default disk group (defaultdg). This is an alias for the disk group name that should be assumed if the
-g option is not specified to a command, or if the VXVM_DEFAULTDG environment variable is undefined. By default, defaultdg is set to
nodg (that is, no disk group).
NOTES
From release 4.0 of VxVM, it is no longer necessary to run vxinstall to configure the rootdg disk group. Disks and disk groups may be
added to VxVM by running commands such as vxdiskadm(1M) or by using the graphical user interface without first running vxinstall. The
operation of VxVM does not require any disk groups to have been configured, and a disk group named rootdg does not need to be present on
the system. Any disk group may be configured as the default disk group that is to be used with VxVM commands. Any disk group named rootdg
has no special significance to VxVM. See the vxdg(1M) manual page for further details.
SEE ALSO vxdctl(1M), vxdg(1M), vxdiskadm(1M), vxintro(1M), vxlicinst(1), vxlicrep(1)VxVM 5.0.31.1 24 Mar 2008 vxinstall(1M)