---------- Post updated at 07:54 AM ---------- Previous update was at 07:52 AM ----------
This is syslog when system used to reboot. Now system does not start and the maintainence light is on
---------- Post updated at 07:56 AM ---------- Previous update was at 07:54 AM ----------
system does not start now and maintenance light is on. This is syslog when system used to reboot automatically.
---------- Post updated at 08:00 AM ---------- Previous update was at 07:56 AM ----------
This is the error messages in diagnostic log
Quote:
2:0>ERROR: TEST = Check cpu synch var CPU 0
2:0>H/W under test = CPU0 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG = CPU 0:0 failed BBC SRAM access, offline cpu.
2:0>END_ERROR
2:0>
2:0>ERROR: TEST = Check cpu synch var CPU 0
2:0>H/W under test = CPU0 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG =
*** Test Failed!! ***
2:0>END_ERROR
2:0>
2:0>ERROR: TEST = Check cpu synch var CPU 0
2:0>H/W under test = CPU0 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG = ERROR: Fatal CPU error on master, rolling over to new master.
2:0>END_ERROR
2:0>Soft Reset.
2:0>
2:0>ERROR: TEST = Power on Reset Initialization
2:0>H/W under test = CPU2 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG = Watchdog timeout, Master CPU Failure on 2:0, rollover to 2:0.
2:0>END_ERROR
2:0>ERROR: No good CPUs left! Calling debug
---------- Post updated at 08:04 AM ---------- Previous update was at 08:00 AM ----------
Thanks for replies. These are the errors in diagnostic log
Quote:
2:0>ERROR: TEST = Check cpu synch var CPU 0
2:0>H/W under test = CPU0 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG = CPU 0:0 failed BBC SRAM access, offline cpu.
2:0>END_ERROR
2:0>
2:0>ERROR: TEST = Check cpu synch var CPU 0
2:0>H/W under test = CPU0 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG =
*** Test Failed!! ***
2:0>END_ERROR
2:0>
2:0>ERROR: TEST = Check cpu synch var CPU 0
2:0>H/W under test = CPU0 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG = ERROR: Fatal CPU error on master, rolling over to new master.
2:0>END_ERROR
2:0>Soft Reset.
2:0>
2:0>ERROR: TEST = Power on Reset Initialization
2:0>H/W under test = CPU2 Basic, Motherboard/Centerplane
2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
2:0>MSG = Watchdog timeout, Master CPU Failure on 2:0, rollover to 2:0.
2:0>END_ERROR
2:0>ERROR: No good CPUs left! Calling debug
Hello all,
I'm lost and can't figure this problem out.
I have a Sun fire 280R running Solaris 8. Everything was working great. I have one drive in bay 1(not 0). But when I reboot the system it trys to open files in /dev/rdsk/c1t1d0s0. Should it have been opeing /dev/rdsk/c1t0d0s0, the... (4 Replies)
All,
After a power loss I went to power on our sun fire v120 that is running solaris 10 and now it will not boot. I tried power cycling it from the lom and pulling the cord but nothing works. All it does is after a power cycle it will start to boot and then start to spit out a bunch of hex... (2 Replies)
Hello,
I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
I am new to Sun.
I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor?
Thanks. (3 Replies)
We have a single threaded application which is restricted by CPU usage even though there are multiple CPUs on the server, hence leading to significant performance issues. Is it possible to merge / combine multiple CPUs at OS level so it appear as a single CPU for the application? (6 Replies)
Hi,
I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either.
Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
I switched on the power to the server. But, the server did not power on i.e., none of the 3 LEDs on the front panel is lighted.
(Power supplies are showing only amber LEDs with "Ready to remove" sign).
I tried to turn on the power supplies via System Controller menu (platform shell), but it... (6 Replies)
Hey,
I have a V210 with a failed CPU fan.
The temperature is currently at 84C and I've been asked to wait a few weeks before replacing as its a production system and it cant be shut down yet.
Is it too hot? Do I risk killing the CPU at this temp?
Its been like this for a few weeks now... (5 Replies)
Hello,
I have purchaced an old SUn fire x2270 server .
I wanted to make ILOM upgrade to the latest version of software :
ILOM 3.0.9.18.a r126592
BIOS vers. 2.09
Server 2.2.3
(10-Aug-2018)
Because my version is very outdated.
But i can't download the updatebecause it's require... (4 Replies)