does anyone know how I can make an automatic backup of files to a tape drive under UNIX. I have so many commands, I don't know which goes where. I have commands for the task scheduler, Cron and other unix commands. Please help. Very Urgent. Thanks (3 Replies)
I am trying to install a tape drive on this system (Unix 7.1.1)
where will I start?
1. Do I need to load the driver on the on board scsi? How?
2. Is there a driver for the tape drive itself?
Things done:
1. Terminated the device on the controller board. (4 Replies)
I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command...
tar tvf /dev/rmt0
...and I keep getting the following error message:
tar: 0511-193 An error occurred while reading from the media.
There is not enough memory available now.
I've googled this error... (2 Replies)
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
Dear all,
I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive.
I have fired the command lsdev -Cc tape but no reply.
how will i configure the tape in LPAR?
Please suggest. It is very urgent. (3 Replies)
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Hi,
i installed a unix tape drive on my alphaserver. when i use a mt command it tells me there is no tape or device.
I have used the hardware manager and it shows the tape is present.
Can anyone help me understand why it cannot pick up the tape as a default? (1 Reply)
Hi,
I'm at AIX 5.3.
My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0
I have tried with several new tapes,... (2 Replies)
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies
LEARN ABOUT OSX
mkdevmaps
mkdevmaps(1M) System Administration Commands mkdevmaps(1M)NAME
mkdevmaps - make device_maps entries
SYNOPSIS
/usr/sbin/mkdevmaps
DESCRIPTION
The mkdevmaps command writes to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
media devices.
The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevmaps command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO allocate(1), bsmconv(1M), attributes(5)NOTES
mkdevmaps might not be supported in a future release of the Solaris operating system.
SunOS 5.10 8 Oct 2003 mkdevmaps(1M)